폐열 이용 폐쇄형 해양온도차발전 사이클의 성능
Performance Analysis of Closed-type OTEC Cycle using Waste Heat
1
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
The cycle performance of closed ocean thermal energy conversion (OTEC) system with 50 kW gross power was evaluated to obtain the basic data for the optimal design of OTEC using waste heat such as solar power, discharged heat from condenser of power plant. The basic thermodynamic model for OTEC is Rankine cycle, and the surface seawater and deep seawater were used for the heat source of evaporator and condenser, respectively. The cycle performance such as efficiency, heat exchanger capacity, etc. was analyzed on the variation of temperature increase by waste heat. The cycle efficiency increased and necessary capacity of evaporator and condenser decreased under 50kW gross power with respect to the temperature increase of working fluid. Also, when the temperature increase is about 13.5oC, the heat which can be used is generated. By generator with 0.9 effectiveness under the simulated condition, the cycle efficiency was improved approximately 3.0% comparing with the basic cycle.
Abstract
The cycle performance of closed ocean thermal energy conversion (OTEC) system with 50 kW gross power was evaluated to obtain the basic data for the optimal design of OTEC using waste heat such as solar power, discharged heat from condenser of power plant. The basic thermodynamic model for OTEC is Rankine cycle, and the surface seawater and deep seawater were used for the heat source of evaporator and condenser, respectively. The cycle performance such as efficiency, heat exchanger capacity, etc. was analyzed on the variation of temperature increase by waste heat. The cycle efficiency increased and necessary capacity of evaporator and condenser decreased under 50kW gross power with respect to the temperature increase of working fluid. Also, when the temperature increase is about 13.5oC, the heat which can be used is generated. By generator with 0.9 effectiveness under the simulated condition, the cycle efficiency was improved approximately 3.0% comparing with the basic cycle.
참고문헌 (12)
- 김현주, "발전소 온배수를 이용한 1MW급 폐쇄형 해양온도차발전 성능해석", 한국마린엔지니어링학회지, 34(4), pp.470~476 (2010), 한국마린엔지니어링학회
- 박성식, "전력 및 담수생산을 위한 해양온도차발 전에 대한 연구", 한국태양에너지학회 춘계학술발표대회 논문집, pp.243~248 (2010)
- 서태범, "해양온도차발전 시스템의 소개", 설비저널, 30(1), pp.18~24 (2001)
- 엄지홍, "20kW급 해양온도차 파이롯 플랜트 성능실험", 설비공학 논문집, 13(10), pp.1002~1008 (2001), 대한설비공학회
- 이호생, "해양 심층수를 이용한 냉난방 히트펌프 시스템", 한국마린엔지니어링학회지, 34(1), pp.21~25 (2010)
- 홍기용, "해양에너지 기술현황과 전망", 설비저널, 39(1), pp.13~20 (2010)
- Claude,G, "Power from the Tropical Seas", Mechanical Engineering, 52(12), pp.1039~1044 (1990)
- D'Arsonal,A, "Utilisation de Forces Naturelles,Revue Scientifique", 17, pp.370~372 (1881)
- A Study on the Development of Ocean Thermal Energy conversion and Wave Power Generation System,Technical report, "Korea Power Company", ~ (1989)
- Uehara, H, "Optimization of a Colsed-Cycle OTEC System", Journal of Solar Energy Engineering, 112, pp.247~256 (1990)
- Uehara,H, "The Experimental Research on Ocean Thermal Energy Conversion using the Uehara Cycle", Proceeding of the International OTEC, 1999, 132~141
- Vega, L.A, "Ocean Thermal Energy Conversion Primer", Marine Technology Society Journal, 6(4), pp.25~35 (2003)