환경하중하의 풍력발전 시스템 구조물의 수치 해석적 기법 연구
Study on Numerical-analysis Technique for Windpower System Structure under Environmental Loadings
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The purpose of this study was to develop a buckling analysis technique for a windpower system structure under environmental loadings (hydrostatic pressure) using FEM. We analyzed an isotropic material and composite material and made a comparison using buckling pressure formulas. First, finite element analyses for an isotropic material (SC410) were performed to obtain the variation of buckling pressure for the number of elements and boundary conditions in a pressure-shell model, and the numerical results were compared with those of existing empirical formulas. Then, additional finite element analyses based on the results of the isotropic material (SC410) were performed to determine the optimum lamination angle and pattern for a composite material (URN300). The results of the FE analyses for the composite material were also compared with those of existing empirical formulas. The ply orientations (lamination angles) used in the FE analyses were 0°, 15°, 30°, 45°, 60°,75°, and . The lamination patterns in the FE analyses were and . The lamination pattern was assumed to be the equivalent model of . The results of the FE analyses for the isotropic material (SC410) indicated that the optimal values for the number of elements and the boundary conditions were 6000 and both simply supported, respectively. The results of the FE analyses for the composite material (URN300) showed that the optimal ply orientation was 60°~75°
Abstract
The purpose of this study was to develop a buckling analysis technique for a windpower system structure under environmental loadings (hydrostatic pressure) using FEM. We analyzed an isotropic material and composite material and made a comparison using buckling pressure formulas. First, finite element analyses for an isotropic material (SC410) were performed to obtain the variation of buckling pressure for the number of elements and boundary conditions in a pressure-shell model, and the numerical results were compared with those of existing empirical formulas. Then, additional finite element analyses based on the results of the isotropic material (SC410) were performed to determine the optimum lamination angle and pattern for a composite material (URN300). The results of the FE analyses for the composite material were also compared with those of existing empirical formulas. The ply orientations (lamination angles) used in the FE analyses were 0°, 15°, 30°, 45°, 60°,75°, and . The lamination patterns in the FE analyses were and . The lamination pattern was assumed to be the equivalent model of . The results of the FE analyses for the isotropic material (SC410) indicated that the optimal values for the number of elements and the boundary conditions were 6000 and both simply supported, respectively. The results of the FE analyses for the composite material (URN300) showed that the optimal ply orientation was 60°~75°
참고문헌 (15)
- 강병윤, "경량화 복합재를 이용한 풍력 블레이드 개발과 해석에 관한 연구", 한국유체기계학회 논문집, 14(2), pp.59~64 (2011), 한국유체기계학회
- 박치모, "상용소프트웨어를 이용한 원환보강 원통의 최종강도 해석(Ⅱ)", 한국해양공학회지, 16(1), pp.36~40 (2002), 한국해양공학회
- 2MW PMSG평 주력발전 시스템개발, 에너 지․개발, 에너지․자원기술개발사업 최종보고서, "산업자원부", ~ (2007)
- 손충렬, "부가수 질량을 고려한 실린더 형 풍력발전기타워의 동적응답연구", 한국태양에너지학회, 춘계학술대회발표논문집, pp.61~66 (2008)
- 이강수, "해상 풍력 발전용 구조물 변화에 따른 고유진동해석", 한국소음진동학회 2007년 춘계학술대회 논문집, pp.1008~1016 (2007)
- 이재신, "선박 및 해양구조물 : 좌굴강도학" (1996), 세종출판사
- 한정영, "대형 풍력발전용 필라멘트 와인딩 복합재 타워의 좌굴 해석", 한국해양공학회지, 25(2), pp.79~84 (2011), 한국해양공학회
- "ABAQUS Analysys User's manual (2010). Vol 4 , Element", 447~449 (2010)
- ASME, "ASME BOILER & PRESSURE VESSEL CODE SECTION X", 34~37 (2004)
- ASTM, "ASTM D3039 Standard Test Method for Tensile Properties of Fiber-Resin Composites", ~ (1987)
- Creswell, D.J, "The Application of Nonlinear Analysis to Ship and Submarine Structures", Advances in Marine Structures, Proceedings of an International Conference, pp.174~200 (1986)
- 권진회, "POSTBUCKLING COMPRESSIVE STRENGTH OF GRAPHITE-EPOXY LAMINATED CYLINDRICAL PANELS LOADED IN COMPRESSION", AIAA JOURNAL, 33(2,), pp.217~222 (1995), AMER INST AERONAUT ASTRONAUT
- Lennon, R.F, "The Effect of Cold Forming and Welding Locked in Stress States on the Buckling Resistance of Orthogonally Stiffened Cylinders", Proceedings of Advances in Marine Structures. Vol 3, Paper No 6, 통권 : 3 (1997)
- Polyzios, D.J, "Static and Dynamic Characteristics of Muli-cell Jointed GFRP Wind Turbine Towers", Composite structures, 90(1), pp.34~42 (2009)
- Uys, P.E, "Optimization of a Steel Tower for a Wind Turbine Structure", Engineering Structures, 29(7), pp.1337~1342 (2007)