선박 해수배관에서 용접봉의 종류에 따라 직류 아크 용접한 용접부위의 부식특성에 관한 전기화학적 평가
Electrochemical Evaluation of Corrosion Property of Welded Zone of Seawater Pipe by DC Shielded Metal Arc Welding with Types of Electrodes
1
조회
0
다운로드
7
인용
0
참고문헌
키워드
초록
The seawater pipes in the engine rooms of ships are surrounded by severely corrosive environments caused by fast flowing seawater containing chloride ions, high conductivity, etc. Therefore, it has been reported that seawater leakage often occurs at a seawater pipe because of local corrosion. In addition, the leakage area is usually welded using shielded metal arc welding with various electrodes. In this study, when seawater pipes were welded with four types of electrodes(E4311, E4301, E4313, and E4316), the difference between the corrosion resistance values in their welding zones was investigated using an electrochemical method. Although the corrosion potential of a weld metal zone welded with the E4316 electrode showed the lowest value compared to the other electrodes, its corrosion resistance exhibited the best value compared to the other electrodes. In addition, a heat affected zone welded with the E4316 electrode also appeared to have the best corrosion resistance among the electrodes. Furthermore, the corrosion resistance of the weld metal zone and heat affected zone exhibited relatively better properties than that of the base metal zone in all of the cases welded with the four types of electrodes. Furthermore, the hardness values of all the weld metal zones were higher than the base metal zone.
Abstract
The seawater pipes in the engine rooms of ships are surrounded by severely corrosive environments caused by fast flowing seawater containing chloride ions, high conductivity, etc. Therefore, it has been reported that seawater leakage often occurs at a seawater pipe because of local corrosion. In addition, the leakage area is usually welded using shielded metal arc welding with various electrodes. In this study, when seawater pipes were welded with four types of electrodes(E4311, E4301, E4313, and E4316), the difference between the corrosion resistance values in their welding zones was investigated using an electrochemical method. Although the corrosion potential of a weld metal zone welded with the E4316 electrode showed the lowest value compared to the other electrodes, its corrosion resistance exhibited the best value compared to the other electrodes. In addition, a heat affected zone welded with the E4316 electrode also appeared to have the best corrosion resistance among the electrodes. Furthermore, the corrosion resistance of the weld metal zone and heat affected zone exhibited relatively better properties than that of the base metal zone in all of the cases welded with the four types of electrodes. Furthermore, the hardness values of all the weld metal zones were higher than the base metal zone.
참고문헌 (13)
- 안석환, "용접열사이클 재현에 의한 SS400강 및 STS304강의 특성 평가- 제1보: 기계적 특성 및 조직", 한국해양공학회지, 19(6), pp.64~71 (2005), 한국해양공학회
- Bilmes, P. D., "Microstructure and Pitting Corrosion of 13CrNiMo Weld Metal", Corrosion Science, 48, pp.3261~3270 (2006)
- 장석기, "Al 7075의 마찰교반 용접부 특성에 관한 연구", 한국마린엔지니어링학회지, 30(1), pp.30~41 (2006), 한국마린엔지니어링학회
- Jeon, D. H., "Control of the Corrosion and Anti-corrosion", pp.294~299 (1985), Iljoongsha
- Jones, D. A., "Principles and Prevention of Corrosion", pp.314~ (1998), Original American Edition Published by Prentice-Hall, Inc
- - 레이저 용접성에 미치는 가공변수의 영향 -, "한국마린엔지니어링학회지", 2006, 629~635, pp.한국마린엔지니어링학회
- 김진경, "선박용 디젤기관의 주철부품 보수용접 특성에 관한 연구", 한국해양공학회지, 20(2), pp.41~45 (2006), 한국해양공학회
- Lee, Y. H., "Crevice Corrosion Resistance of Stainless Steel in Natural Sea Water with Different Post Welding Treatment", Corrosion Science and Technology, 2(5), pp.219~224 (2003)
- Kyung-ManMoon, "A Study on the Post-Weld Heat Treatment Effect to Mechanical Properties and Hydrogen Embrittlement for Heating Affected Zone of a RE 36 Steel", CORROSION SCIENCE AND TECHNOLOGY, 32(6), pp.6~288 (2003), 한국부식방식학회
- 오종인, "선체구조용 A급 강재의 하이브리드 용접에 대한 열 및 역학적 특성에 관한 연구", 한국해양공학회지, 21(1), pp.64~68 (2007), 한국해양공학회
- Raja, V. S., "Influence of Nitrogen on the Pitting Corrosion Behavior of 904L Weld Clad", Corrosion Science, 40(10), pp.1609~1625 (1998)
- Shin, M. K., "New Edition Workshop Practice", pp.242~245 (1984), Ahsung Publishing Co
- Tsay, L. W., "Hydrogen Sulphide Stress Corrosion Cracking of 2. 25 Cr-Mo Steel Weldments", Corrosion Science, 39(7), pp.1165~1176 (1997)