배기밸브 보수 용접부의 부식 특성에 관한 전기화학적 연구
An Electrochemical Study on Corrosion Property of Repair Welding Part for Exhaust Valve
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
The diesel engine of the merchant ship has been operated in severe environments more and more, because the temperature of the exhaust gas of a combustion chamber is getting higher and higher with increasing use of heavy oil of low quality, due to the significant increase in the price of oil in recent some years. As a result, the degree of wear and corrosion between exhaust valve and seat ring is more serious compared to other engine parts. Thus the repair welding of exhaust valve and seat ring is a unique method to prolong the life of the exhaust valve, from an economical point of view. In this study, the corrosion property of both weld metal and base metal was investigated using electrochemical methods such as measurement of corrosion potential, cathodic and anodic polarization curves, cyclic voltammogram, and polarization resistance in 5% H2SO4 solution. The test specimen was a part of an exhaust valve stem being welded as the base metal, using various welding methods. In all cases, the corrosion resistance as well as hardness of the weld metal zone was superior to the base metal. In particular, plasma welding showed relatively good properties for both corrosion resistance and hardness, compared to other welding methods. In the case of DC SMAW (Shielded metal arc welding), corrosion resistance of the weld metal zone was better than that of the base metal, although its hardness was almost same as the base metal.
Abstract
The diesel engine of the merchant ship has been operated in severe environments more and more, because the temperature of the exhaust gas of a combustion chamber is getting higher and higher with increasing use of heavy oil of low quality, due to the significant increase in the price of oil in recent some years. As a result, the degree of wear and corrosion between exhaust valve and seat ring is more serious compared to other engine parts. Thus the repair welding of exhaust valve and seat ring is a unique method to prolong the life of the exhaust valve, from an economical point of view. In this study, the corrosion property of both weld metal and base metal was investigated using electrochemical methods such as measurement of corrosion potential, cathodic and anodic polarization curves, cyclic voltammogram, and polarization resistance in 5% H2SO4 solution. The test specimen was a part of an exhaust valve stem being welded as the base metal, using various welding methods. In all cases, the corrosion resistance as well as hardness of the weld metal zone was superior to the base metal. In particular, plasma welding showed relatively good properties for both corrosion resistance and hardness, compared to other welding methods. In the case of DC SMAW (Shielded metal arc welding), corrosion resistance of the weld metal zone was better than that of the base metal, although its hardness was almost same as the base metal.
참고문헌 (21)
- 김민남, "습식수중 용접봉의 기계적 성질에 관한 연구", 한국해양공학회지, 14(4), pp.56~61 (2000)
- 김복인, "피복성분에 의한 수중용접봉의 아크 안정성 개선에 관한 연구", 한국해양공학회지, 15(4), pp.75~79 (2001)
- 김진경, "선박용 디젤기관의 주철부품 보수용접 특성에 관한 연구", 한국해양공학회지, 20(2), pp.41~45 (2006), 한국해양공학회
- 안석환, "용접열사이클 재현에 의한 SS400강 및 STS304강의 특성 평가- 제1보: 기계적 특성 및 조직", 한국해양공학회지, 19(6), pp.64~71 (2005), 한국해양공학회
- KS D 3731, "유영상", 한국표준협회, ~ (2003)
- 오종인, "선체구조용 A급 강재의 하이브리드 용접에 대한 열 및 역학적 특성에 관한 연구", 한국해양공학회지, 21(1), pp.64~68 (2007), 한국해양공학회
- 전대희, "부식과 방식의 관리", pp.426~428 (1985), 일중사
- Annette,O.B., "WELDING HANDBOOK", pp.331~332 (2004), AWS
- Bilmes,P.D., "Microstructure and Pitting Corrosion of 13CrNiMo Weld Metal", Corrosion Science, 48, pp.3261~3270 (2006)
- ISOTEC, "PTA-Welding Systems", pp.3~4 (1998), ISOTEC
- 장석기, "Al 7075의 마찰교반 용접부 특성에 관한 연구", 한국마린엔지니어링학회지, 30(1), pp.30~41 (2006), 한국마린엔지니어링학회
- Jones,D.A., "Principles and Prevention of Corrosion", pp.314~ (1998), Prentice-Hall
- - 레이저 용접성에 미치는 가공변수의 영향 -, "한국마린엔지니어링학회지", 2006, 629~635, pp.한국마린엔지니어링학회
- 김종도, "리튬이온전지의 밀봉용접을 위한 펄스 Nd:YAG레이저 용접조건의 최적화", 한국마린엔지니어링학회지, 30(5), pp.623~628 (2006), 한국마린엔지니어링학회
- Lee,Y.H., "Crevice Corrosion Resistance of Stainless Steel in Natural Sea Water with Different Post Welding Treatment", CORROSION SCIENCE AND TECHNOLOGY, 2(5), pp.219~224 (2003)
- I.H.Lo, "Effect of Heat Treatment on the Pitting Corrosion Behavior of 347 SS Weld Overlay", CORROSION SCIENCE AND TECHNOLOGY, 31(5), pp.3~367 (2002), 한국부식방식학회
- Kyung-ManMoon, "A Study on the Post-Weld Heat Treatment Effect to Mechanical Properties and Hydrogen Embrittlement for Heating Affected Zone of a RE 36 Steel", CORROSION SCIENCE AND TECHNOLOGY, 32(6), pp.6~288 (2003), 한국부식방식학회
- Muylder,J.V., "Atlas of Electrochemical Equilibria in Aqueous Solution", pp.260~509 (1966), cebelcor
- Raja,V.S., "Influence of Nitrogen on the Pitting Corrosion Behavior of 904L Weld Clad", Corrosion Science, 40(10), pp.1609~1625 (1998)
- Tsay,L.W., "Hydrogen Sulphide Stress Corrosion Cracking of 2.25 Cr-Mo Steel Weldments", Corrosion Science, 39(7), pp.1165~1176 (1997)
- UNITOR, "Maritime Welding Handbook(9th edition)", pp.170~171 (2005), UNITOR ASA