3D 휴먼 시뮬레이션을 통한 세일링 요트 윈치 배치 설계 연구
Research on Arrangement Design for Sailing Yacht Winch using 3D Human Simulation
1
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Unlike other leisure boats, a sailing yacht is propelled by wind power using sails that are controlled by the crew. Therefore, the ergonomic design of the equipment that the crew has to operate for sailing might be very important. However, it is difficult to find design rules and regulations for the equipment arrangement of a sailing yacht based on ergonomics. In this study, the arrangement design for the height and side plate angle of a winch for a sailing yacht was examined from an ergonomic design point of view. In a simulation, a Korean male in his 20s was selected as a human model for a grinder. The physical load was analyzed when he was operating a winch using a 3D human simulation. The lower back load showed the highest value when using the grinder at 90° and 180°. Based on the results for the lower back load when using the grinder with various winch heights, it is suggested that the winch height from the cockpit floor to the top of the winch should be more than 40% of the height of the human operator. In addition, according to the results for the lower back load with various horizontal distances from the body, it is suggested that the side plate angle should be less than 16°.
Abstract
Unlike other leisure boats, a sailing yacht is propelled by wind power using sails that are controlled by the crew. Therefore, the ergonomic design of the equipment that the crew has to operate for sailing might be very important. However, it is difficult to find design rules and regulations for the equipment arrangement of a sailing yacht based on ergonomics. In this study, the arrangement design for the height and side plate angle of a winch for a sailing yacht was examined from an ergonomic design point of view. In a simulation, a Korean male in his 20s was selected as a human model for a grinder. The physical load was analyzed when he was operating a winch using a 3D human simulation. The lower back load showed the highest value when using the grinder at 90° and 180°. Based on the results for the lower back load when using the grinder with various winch heights, it is suggested that the winch height from the cockpit floor to the top of the winch should be more than 40% of the height of the human operator. In addition, according to the results for the lower back load with various horizontal distances from the body, it is suggested that the side plate angle should be less than 16°.
참고문헌 (11)
- Chaffin, D. B., "Occupational Biomechanics" (1999), Wiley
- Garg, A., "A Metabolic Rate Prediction Model for Manual Materials Handling Jobs", Ph.D, pp.1976
- 김명현, "40ft급 세일링 요트의 전산해석을 통한 구조안전성 평가", 대한조선학회 논문집, 47(5), pp.703~708 (2010), 대한조선학회
- 김동준, "세일링 요트의 인간공학적 설계를 위한 기초 연구", 한국안전학회지, 28(2), pp.73~77 (2013), 한국안전학회
- 김동준, "Application of Digital Human Modeling for Design of Yacht", 대한인간공학회지, 32(5), pp.475~480 (2013), 대한인간공학회
- 김인철, "거문도를 중심으로 하는 세일링요트 안전항로 개발에 관한 연구 - 전남 여수 거문도와 제주특별자치도 김녕항 루트를 중심으로 -", 해양환경안전학회지, 22(2), pp.174~180 (2016), 해양환경안전학회[DOI]
- Jäger. M., "Critical Survey on the Biomechanical Criterion in the NIOSH Method for the Design and Evaluation of Manual Lifting Tasks", International Journal of Industrial Ergonomics, 23(4), pp.331~337 (1999)
- 이장현, "소형 요트의 기본 구조 설계 및 구조 해석 기법에 대한 연구", 대한조선학회 논문집, 43(1), pp.791~802 (2006), 대한조선학회
- Siemens, P.L.M, "Software, 2009. Tecnomatix Jack, Siemens PLM Software, Plano, TX", ~ (2009)
- Snook, S. H., "The Design of Manual Handling Tasks", Ergonomics, 21, pp.963~985 (1978)
- Snook, S. H., "The Design of Manual Handling Tasks: Revised Tables of Maximum Acceptable Weights and Forces", Ergonomics, 34, pp.1197~1213 (1991)