A Study on Design Variables for Increasing the Breaking Strength of Synthetic Fiber Chain
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this study, a fiber chain was developed to replace a steel chain using high-modulus polyethylene DM20. The pick count, wrapping count, and inner length were selected as the main design variables of the fiber chain and were analyzed to increase the breaking strength. Orthogonal array experiments were conducted, and the results were analyzed with respect to the breaking strength. The analysis revealed that the pick count and wrapping count had meaningful effects at significance levels within 5%. The main effect analysis revealed that a smaller pick count, larger wrapping count, and longer inner length caused the breaking strength to increase. With the wrapping count fixed at 1, a pick count less than -0.65, and an inner length greater than 0.38, the breaking strength was calculated to be greater than 300 kN. These results are expected be important factors in the derivation of an optimal combination of design variables to attain a fiber chain with a targeted strength.
Abstract
In this study, a fiber chain was developed to replace a steel chain using high-modulus polyethylene DM20. The pick count, wrapping count, and inner length were selected as the main design variables of the fiber chain and were analyzed to increase the breaking strength. Orthogonal array experiments were conducted, and the results were analyzed with respect to the breaking strength. The analysis revealed that the pick count and wrapping count had meaningful effects at significance levels within 5%. The main effect analysis revealed that a smaller pick count, larger wrapping count, and longer inner length caused the breaking strength to increase. With the wrapping count fixed at 1, a pick count less than -0.65, and an inner length greater than 0.38, the breaking strength was calculated to be greater than 300 kN. These results are expected be important factors in the derivation of an optimal combination of design variables to attain a fiber chain with a targeted strength.
참고문헌 (22)
- Banfield, S., "Evaluation of fiber rope properties for offshore mooring", Ocean Engineering, 25(10), pp.861~879 (1998)[DOI]
- Del Vecchio, C. J. M., "Light weight materials for deep water moorings", Doctoral, pp.1992
- "Offshore Technology Conference", 2010, ~
- "Offshore Technology Conference", 2002, ~
- "Offshore Technology Conference", 2009, ~
- Det Norske Veritas., "Offshore fibre ropes (Offshore Standard DNV-OS-E303)", ~ (2018)
- Fernandes, A. C., "Mechanical properties of polyester mooring cables", International Journal of Offshore and Polar Engineering, 9(03), pp.208~213 (1999)
- Peter, D., "Mechanical behaviour of HMPE and aramid fibre ropes for deep sea handling operations", Ocean Engineering, 38(17‒18), pp.22208~22214 (2011)
- Davies, P., "An empirical model to predict the lifetime of braided HMPE handling ropes under cyclic eend over sheave(CBOS)loading", Ocean Engineering, 97, pp.74~81 (2015)[DOI]
- Garrity, R., "The use of HMPE mooring lines in deepwater MODU mooring systems", OCEANS 2008, pp.1~4 (2008), IEEE
- "Offshore Technology Conference Brazil", 2011, ~
- Bunsell, A. R., "Handbook of tensile properties of textile and technical fibres" (2009), Woodhead Publishing
- Tahar, A., "Coupled-dynamic analysis of floating structures with polyester mooring lines", Ocean Engineering, 35(17‒18), pp.1676~1685 (2008)
- Weller, S. D., "Synthetic rope responses in the context of load history : Operational performance", Ocean Engineering, 83, pp.111~124 (2014)[DOI]
- "Offshore Technology Conference", 2002, ~
- "Offshore Technology Conference", 2002, ~
- "Offshore Technology Conference", 2006, ~
- Da Costa Mattos, H. S., "Modelling creep tests in HMPE fibres used in ultra-deep-sea mooring ropes", International Journal of Solids And Structures, 48(1), pp.144~152 (2011)[DOI]
- Cédric, B., "Influence of bedding-in on the tensile performance of HMPE fiber ropes", Ocean Engineering, 203, pp.107144~ (2020)[DOI]
- Gen, L., "Dynamic stiffness of braided HMPE ropes under long-term cyclic loads : A full-scale experimental investigation", Ocean Engineering, 230, pp.109076~ (2021)[DOI]
- 김경수, "Evaluating the Mechanical Properties of Fiber Yarns for Developing Synthetic Fiber Chains", 한국해양공학회지, 35(6), pp.426~433 (2021), 한국해양공학회[DOI]
- International Organization for Standardization, "Fibre ropes -Determination of certain physical and mechanical properties (ISO 2307:2019)", ~ (2019)