고출력 전자빔 드릴링 가공 파라미터 선정에 따른 증기화 증폭시트의 가공 실험 및 특성 분석
Machining experimental and characteristic analysis of vaporized amplification sheets according to selection of high-power density electron beam drilling parameters
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Recently, research on precise parts required in aerospace, ship, and automobile industries has been activelyconducted. In this paper, electron beam drilling machining parameters were selected and experiments were conducted tocompare processing characteristics analysis according to machining parameters through machining experiments of avaporization amplification sheet to which STS 304 was applied. Also, as a result of measuring the machining. As thethickness gradually increased, it was confirmed that the electron beam could not reach the vaporization amplification sheetand thus melted on the surface of the material. As a result of the experimental analysis, it was analyzed that thevaporization explosion reaction of the vaporization amplification sheet was not normally performed due to the workingdistance (WD) according to the material thickness.
Abstract
Recently, research on precise parts required in aerospace, ship, and automobile industries has been activelyconducted. In this paper, electron beam drilling machining parameters were selected and experiments were conducted tocompare processing characteristics analysis according to machining parameters through machining experiments of avaporization amplification sheet to which STS 304 was applied. Also, as a result of measuring the machining. As thethickness gradually increased, it was confirmed that the electron beam could not reach the vaporization amplification sheetand thus melted on the surface of the material. As a result of the experimental analysis, it was analyzed that thevaporization explosion reaction of the vaporization amplification sheet was not normally performed due to the workingdistance (WD) according to the material thickness.
참고문헌 (10)
- Quazi, M. M., "Current research and development status of dissimilar materials laser welding of titanium and its alloys", Optics & Laser Technology, 126, pp.106090~ (2020)
- Schubert, G., "Electron beam welding Process, applications and equipment", Proceedings of the IIW International Conference on Advances in Welding and Allied Technologies, pp.283~288 (2009)
- Li, Y., "Effects of welding condition on weld shape and distortion in electron beam welded Ti2AlNb alloy joints", Materials & Design, 114, pp.226~233 (2017)
- Kim, J., "Large pulsed electron beam welded percolation networks of silver nanowires for transparent and flexible electrodes", ACS applied materials &interfaces, 8(32), pp.20938~20945 (2016)
- Kim, J., "Deburring drilled holes in CFRP composites with large pulsed electron beam(LPEB)irradiation", Journal of Manufacturing Processes, 40, pp.68~75 (2019)
- Kim, J., "Temperature predictive model of the large pulsed electron beam (LPEB) irradiation on engineering alloys", Applied Thermal Engineering, 128, pp.151~158 (2018)
- 김성현, "증기화 증폭시트를 적용한 전자빔 가공 특성 연구", Design & Manufacturing, 12(2), pp.46~50 (2018), 한국금형공학회[DOI]
- 김현정, "Metal Powder에 따른 증기화 증폭 시트의 개발을 통한 열 중량 분석 및 고출력 전자빔의 가공 특성 분석", Design & Manufacturing, 14(1), pp.56~62 (2020), 한국금형공학회[DOI]
- Kim, S. H., "A study on the preparation method of vaporized amplification sheets and electron beam machining characteristics", Journal of Manufacturing Processes, 50, pp.234~240 (2020)
- Węglowski, M. S., "Electron beam welding Techniques and trends Review", Vacuum, 130, pp.72~92 (2016)