열진공성형에서 발생하는 필름의 두께 분포와 패턴 변형에 관한 연구
A study on the thickness distribution and pattern deformation of films in vacuum-assisted thermoforming
2
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
Vacuum-assisted thermoforming is one of the critical steps for successful application of film insert molding(FIM) to parts of complex shape. In this study, the simulations and experiments of thermoforming processes were performed to investigate the effects of process conditions on thickness distribution and printed pattern deformation of films in vacuum-assisted thermoforming. The film thickness uniformity increased with decreasing film heating time, whereas it increased with increasing vacuum delay time. After thermoforming of films with uniform pattern space of 5mm, the maximum space was 9.432mm. Based on the simulation, a modified pattern was calculated to obtain uniform spaces after thermoforming. In the experiments for film with the modified pattern, the maximum space appeared 5.837mm. In, addition. the predicted patterns were in good agreement with the experimental results.
Abstract
Vacuum-assisted thermoforming is one of the critical steps for successful application of film insert molding(FIM) to parts of complex shape. In this study, the simulations and experiments of thermoforming processes were performed to investigate the effects of process conditions on thickness distribution and printed pattern deformation of films in vacuum-assisted thermoforming. The film thickness uniformity increased with decreasing film heating time, whereas it increased with increasing vacuum delay time. After thermoforming of films with uniform pattern space of 5mm, the maximum space was 9.432mm. Based on the simulation, a modified pattern was calculated to obtain uniform spaces after thermoforming. In the experiments for film with the modified pattern, the maximum space appeared 5.837mm. In, addition. the predicted patterns were in good agreement with the experimental results.
참고문헌 (10)
- Gimenez, E., "Study of the Thermoformability of Ethylene-vinyl Alcohol Copolymer Based Barrier Blende of Interest in Food Packaging Applications", J. Appl. Poly. Sci, 96(6), pp.3851~3855 (2004)
- Gimenez, E., "Uniaxial Tensile Behavior and Thermoforming Characteristics of High Barrier EVOH-Based Blends of Interest in Food Packing", Polym. Eng. Sci., 44(3), pp.598~680 (2004)
- Poller, S., "Film Temperatures Determine the Wall Thickness of Thermoformed Parts", SPE ANTEC, 38(1), pp.104~108 (1992)
- 유영길, "열진공성형 공정조건이 적층필름의 두께분포에 미치는 영향", 소성∙가공, 20(3), pp.250~256 (2011), 한국소성∙가공학회
- 이호상, "열진공성형에서 적층필름 두께변화에 대한 수치 및 실험적 해석", 소성∙가공, 22(3), pp.171~177 (2013), 한국소성∙가공학회
- Kim, G., "Prediction of the Film Thickness Distribution and Pattern Change during Film Insert Thermoforming", Polym. Eng. Sci, 49(11), pp.2195~2203 (2009)
- Lee, J. K., "Effects of Rheological Properties and Processing Parameters on ABS Thermoforming", Polym. Eng. Sci, 41(2), pp.240~261 (2001)
- Lee, J. K., "Influence of Initial Sheet Temperature on ABS Thermoforming", Polym. Eng. Sci, 41(10), pp.1830~1844 (2001)
- G'Sell, C., "Determination of the Plastic Behaviour of Solid Polymers at Constant True Strain Rate", J. Mater. Sci., 14(3), pp.583~591 (1979)
- "Acuuform, Computer Simulations of Transforming and Blowing Molding" (2005)[URL]