요인분석법을 이용한 파인 블랭킹 공정의 파단면 최소화에 관한 연구
A study on minimization of fracture surface in fine blanking process using factorial analysis
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The Fine Blanking process is an effective precision shearing process that can obtain a smooth cutting surface and high product precision through a single blanking process. It is widely used in various manufacturing fields. However, shearing through this fine blanking process is only intended to minimize burrs, die rolls and fracture surfaces and does not completely remove them. Therefore, it is necessary to study the minimization of burrs, die rolls and fracture surfaces in the fine blanking process. In this study, a study was conducted on the relationship between the fracture surface and process conditions that occurred during product production using the fine blanking process. For this purpose, the shape of the V-ring indenter, the distance to the punch, and the pressure force, clearance, shear rate, and physical properties of the material were selected as process and design variables, and the relationship with the fracture surface according to each process and design condition was tested. It was analyzed through the Experimental Design Method.
Abstract
The Fine Blanking process is an effective precision shearing process that can obtain a smooth cutting surface and high product precision through a single blanking process. It is widely used in various manufacturing fields. However, shearing through this fine blanking process is only intended to minimize burrs, die rolls and fracture surfaces and does not completely remove them. Therefore, it is necessary to study the minimization of burrs, die rolls and fracture surfaces in the fine blanking process. In this study, a study was conducted on the relationship between the fracture surface and process conditions that occurred during product production using the fine blanking process. For this purpose, the shape of the V-ring indenter, the distance to the punch, and the pressure force, clearance, shear rate, and physical properties of the material were selected as process and design variables, and the relationship with the fracture surface according to each process and design condition was tested. It was analyzed through the Experimental Design Method.
참고문헌 (14)
- S. H. Kim, "Defects and countermeasures of press mold", pp.467~499 (2003), Daekwang Books
- X. C. Zhuang, "Comprehensive prediction method for die-roll height of fine-blanking components", Int. J. Adv. Manuf. Technol., 98, pp.2819~2829 (2018)
- Lange K, "Cold forming and fineblanking", pp.141~151 (1997), Edelstahlwerke Buderus AG. Feintool AG Lyss
- T. Nakagawa, "Fine blanking" (1998), The Nikkan Kogyo Shinbun, Ltd
- 김종덕, "파인 블랭킹 금형의 V-링 위치 및 다이 챔퍼 형상이 다이 롤 높이에 미치는 영향에 관한 실험 연구", 한국산학기술학회논문지, 13(5), pp.2009~2014 (2012), 한국산학기술학회[DOI]
- Q. D. Zheng, "State-of-the-art and future challenge in fine-blanking technology", Prod. Eng., 13, pp.61~70 (2019)
- J. D. Kim, "A study on the effect of V-ring position on the die roll height in fine blanking for special automobile seat recliner gear, Trans Tech Publications", Appl. Mech. Mater., 383-390, pp.7122~7127 (2012)
- XC Zhuang, "Comprehensive prediction method for die-roll height of fine-blanking components", The International Journal of Advanced Manufacturing Technology, 98, pp.2819~2829 (2018)
- YC Leung, "The effects of tool geometry change on shearing edge finish in fine-blanking of different materials", Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 217, pp.1057~1062 (2003)
- T. S. Kwak, "Finite element analysis on the effect of die clearance on shear planes in fine blanking", J. Mater. Process. Technol., 130, pp.462~468 (2002)
- N. Hatanaka, "Finite element simulation of the shearing mechanism in the blanking of sheet metal", J. Mater. Process. Technol., 139, pp.64~70 (2003)
- W. F. Fan, "An investigation on the damage of AISI-1045 and AISI-1025 steels in fine-blanking with negative clearance", Mater. Sci. Eng. A, 499, pp.248~251 (2009)
- S Kurra, "P Kumar G"Analysis of fine blanking process through finite element simulations"", Advances in Materials and Processing Technologies, 6 (2020)
- J. H Kim, "Development of fine blanking die with fluid chamber and its application to production of circular blanks in a hydraulic press", Korean Soc. Precis. Eng., 13(5), pp.157~163 (1996)