인공신경망을 통한 사출 성형조건의 최적화 예측 및 특성 선택에 관한 연구
A study on the prediction of optimized injection molding conditions and the feature selection using the Artificial Neural Network(ANN)
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The qualities of the products produced by injection molding are strongly influenced by the process variables of the injection molding machine set by the engineer. It is very difficult to predict the qualities of the injection molded product considering the stochastic nature of the manufacturing process, since the processing conditions have a complex impact on the quality of the injection molded product. It is recognized that the artificial neural network(ANN) is capable of mapping the intricate relationship between the input and output variables very accurately, therefore, many studies are being conducted to predict the relationship between the results of the product and the process variables using ANN. However in the condition of a small number of data sets, the predicting performance and robustness of the ANN model could be reduced due to too many input variables. In the present study, the ANN model that predicts the length of the injection molded product for multiple combinations of process variables was developed. And the accuracy of each ANN model was compared for 8 process variables and 4 important process inputs that were determined by the feature selection. Based on the comparison, it was verified that the performance of the ANN model increased when only 4 important variables were applied.
Abstract
The qualities of the products produced by injection molding are strongly influenced by the process variables of the injection molding machine set by the engineer. It is very difficult to predict the qualities of the injection molded product considering the stochastic nature of the manufacturing process, since the processing conditions have a complex impact on the quality of the injection molded product. It is recognized that the artificial neural network(ANN) is capable of mapping the intricate relationship between the input and output variables very accurately, therefore, many studies are being conducted to predict the relationship between the results of the product and the process variables using ANN. However in the condition of a small number of data sets, the predicting performance and robustness of the ANN model could be reduced due to too many input variables. In the present study, the ANN model that predicts the length of the injection molded product for multiple combinations of process variables was developed. And the accuracy of each ANN model was compared for 8 process variables and 4 important process inputs that were determined by the feature selection. Based on the comparison, it was verified that the performance of the ANN model increased when only 4 important variables were applied.
참고문헌 (12)
- Xuehong, L., "A statistical experimental study of the injection molding of optical lenses", J. Mater. Proces. Technol, 113(1-3), pp.185~195 (2001)
- Joseph, B.D., "Injection molds and molding: a practical manual" (1987), Springer Science & Business Media
- Yarlagadda, P.K., "Development of Hybrid Neural Network System for Prediction of Process Parameters in Injection Moulding", J. Mater. Process. Technol, 118(1), pp.109~115 (2001)
- Kenig, S, "Control of Properties in Injection Molding by Neural Networks", Eng. Appl. Artif. Intell, 14(6), pp.819~823 (2001)
- Lau, H.C.W, "Neural Networks for the Dimensional Control of Molded Parts based on Reverse Process Model", J. Mater. Process. Technol, 117(1), pp.89~96 (2001)
- Shen, C, "Optimization of Injection Molding Proces Parameters Using Combination of Artifcial Neural Network and Genetic Algorithm Method", J. Mater. Proces. Technol, 183(2-3), pp.412~418 (2007)
- Yang, J.B, "Feature Selection for MLP Neural Network: The Use of Random Permutation of Probailistic Outputs", IEEE Trans. Neural Networks, 20(12), pp.1911~1922 (2009)
- Solvason, C.C, "Efficient Visual Mixture Design of Experiments Using Property Clustering Techniques", Ind. Eng. Chem. Res, 48(4), pp.245~256 (2009)
- Leaman, R., "Disease Name Normalization with Pairwise Learning to Rank", Bioinf, 29(22), pp.2909~2917 (2013)
- Goldberg, Y., "Neural Network Methods for Natural Language Processing", Synth. Lect. Hum. Lang. Technol, 10(1), pp.1~309 (2017)
- Svozil, D., "Introduction to multi-layer feed forward neural networks", Chemom. Intell. Lab. Syst, 39(1), pp.43~62 (1997)
- Prechelt. L., "Automatic early stopping using cross validation: quantifying the criteria", Neural Netw, 11(4), pp.761~767 (1998)