현장 중합을 이용한 PLA(Poly L-Lactide) 수지 기반 섬유 강화 복합 재료 제조 및 GPC를 이용한 분자량 측정
Manufacturing Fiber-Reinforced Composite Materials Based on PLA (Poly L-Lactide) Resin Using In-Situ Polymerization and Molecular Weight Measurement Using GPC
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
The conventional FRP (Fiber Reinforced Plastic) manufacturing process used thermoset resins for ease of molding but faced the issue of non-recyclability. To address these shortcomings, a new process utilizing thermal plastic resin was developed. However, due to the high viscosity of thermal plastic resin, problems such as fiber deformation and a reduced fiber volume fraction occurred during the high-temperature, high-pressure process. In this study, to overcome the limitations of the conventional process, fiber-reinforced composite materials were manufactured through in-situ polymerization using PLA (Poly L-Lactide) resin in the VA-RTM (Vacuum Assistance Resin Transfer Molding) process. The fiber volume of the produced specimens was calculated, and resin impregnation and porosity were confirmed through optical microscopy. Additionally, molecular weight analysis using GPC (Gel Permission Chromatography) demonstrated improvements over the conventional process and emphasized the essential requirement of temperature control.
Abstract
The conventional FRP (Fiber Reinforced Plastic) manufacturing process used thermoset resins for ease of molding but faced the issue of non-recyclability. To address these shortcomings, a new process utilizing thermal plastic resin was developed. However, due to the high viscosity of thermal plastic resin, problems such as fiber deformation and a reduced fiber volume fraction occurred during the high-temperature, high-pressure process. In this study, to overcome the limitations of the conventional process, fiber-reinforced composite materials were manufactured through in-situ polymerization using PLA (Poly L-Lactide) resin in the VA-RTM (Vacuum Assistance Resin Transfer Molding) process. The fiber volume of the produced specimens was calculated, and resin impregnation and porosity were confirmed through optical microscopy. Additionally, molecular weight analysis using GPC (Gel Permission Chromatography) demonstrated improvements over the conventional process and emphasized the essential requirement of temperature control.
참고문헌 (18)
- Hollaway, L. C., "A review of the present and future utilisation of FRP composites in the civil infrastructure with reference to their important in-service properties", Construction and building materials, 24(12), pp.2419~2445 (2010)
- Frigione, M., "Durability issues and challenges for material advancements in FRP employed in the construction industry", Polymers, 10(3), pp.247~ (2018)
- Qureshi, J., "A review of fibre reinforced polymer structures", Fibers, 10(3), pp.27~ (2022)
- Zou, X., "A review on FRP-concrete hybrid sections for bridge applications", Composite Structures, 262, pp.113336~ (2021)
- Mangalgiri, P. D., "Composite materials for aerospace applications", Bulletin of Materials Science, 22, pp.657~664 (1999)
- Ekuase, O. A., "A review on the out-of-autoclave process for composite manufacturing", Journal of Composites Science, 6(6), pp.172~ (2022)
- Razali, N., "Design for Sustainability", pp.395~413 (2021), Elsevier
- Schinner, G., "Recycling carbon-fiber-reinforced thermoplastic composites", Journal of Thermoplastic Composite Materials, 9(3), pp.239~245 (1996)
- Yang, J. H., "Preparation and characterization of poly (l-lactide)–graphene composites using the in situ ring-opening polymerization of PLLA with graphene as the initiator", Journal of Materials Chemistry, 22(21), pp.10805~10815 (2012)
- Mezzasalma, L., "Organocatalytic ring-opening polymerization of L-lactide in bulk : A long standing challenge", European Polymer Journal, 95, pp.628~634 (2017)
- Moore, J. C., "Gel permeation chromatography. I. A new method for molecular weight distribution of high polymers", Journal of Polymer Science Part A: General Papers, 2(2), pp.835~843 (1964)
- BENOIT, H. C., "Reflections on “A Universal Calibration for Gel Permeation Chromatography,”", J. Polym. Sci, 5, pp.753~ (1967)
- 이윤선, "탄소섬유를 이용한 열가소성 복합재료 시트 제조 및 특성", Composites Research, 28(4), pp.168~175 (2015), 한국복합재료학회
- 정의철, "사출성형용 열가소성 펠렛을 이용한 탄소섬유복합소재 제작에 관한 연구", 소성∙가공, 25(6), pp.402~408 (2016), 한국소성∙가공학회
- Shi, J., "A facile molding method of continuous fiber-reinforced thermoplastic composites and its mechanical property", Polymers, 14(5), pp.947~ (2022)
- Wang, J., "Polyphosphoesters: controlled ring-opening polymerization and biological applications" (2012)
- Ober, C. K., "The effect of temperature and initiator levels on the dispersion polymerization of polystyrene", Journal of Polymer Science Part A : Polymer Chemistry, 25(5), pp.1395~1407 (1987)
- 장영진, "유리섬유", 폴리프로필렌 복합원사의 유리섬유 함량 변화에 따른 열가소성 복합재료의 함침 및 기계적 특성 평가, 2020, pp.33(6), 346~352[DOI]