악골 기형 치료를 위한 구내형 골신장기 개발에 관련된융합 연구
Convergence study related in development of new intraoral jaw bone distractor in treating dentofacial deformities
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
악골기형에 따른 외과적 치료방법은 상악골 또는 하악골을 직접 늘리거나 줄이는 방식을 이용한다. 골신장술(distraction osteogenesis)은 열성장한 악골에 치밀뼈절단술(corticotomy)을 시행한 후, 골신장기(jaw bone distractor)를 사용하여 간헐적인 힘을 골에 부과하며 골의 길이를 늘여주는 대표적인 방법이다. 그러나 이러한 골신장기는 피부를 관통한 채 골에 고정되기 때문에, 비심미적이며 감염이나 흉터 등의 많은 문제점이 발생한다. 이연구에서는 구내형 골신장기(intraoral jaw bone distractor) 개발을 위해 유한요소분석을 시행하여 핵심구동부의안정성을 시뮬레이션한 후, 골신장기를 제작하였다. 융합연구를 통하여 향후 무선형 골신장기를 제작하기 위한 기반자료를 구축하였으며, 관련 자료는 골신장술의 근본적인 문제점을 해결할 수 있는 가능성을 제시하며, 제반 기술은다양한 의료기기 개발 기술에 활용될 수 있다.
Abstract
Distraction osteogenesis is applied to correct mandible or maxilla deformities. Owing to the distractor being away from the skin, it is not aesthetic. Infection can arise due to manual part. And therefore, it is necessary to make the distractor using a new mechanism. 3D software was used for the intraoral distractor modeling. 3D meshes were used to analyze the stress distribution of the distractor was analyzed using Finite element analysis software. This research developed a intraoral distractor for continuous mandible distraction through convergence study. Base on the results, it provide helpful data for future version of the wireless intraoral distractor in other fields of bio and medical engineering.
참고문헌 (18)
- G. A. Ilizarov, "Clinical application of the tension-stress effect for limb lengthening", Clin Orthop Relat Res, 250, pp.8~26 (1990)
- J. Cano, "Osteogenic alveolar distraction: a review of the literature", Oral Surg Oral Med Oral Pathol Oral Radiol Endod, 101(1), pp.11~28 (2006)
- J. G. McCarthy, "Lengthening the human mandible by gradual distraction", Plast Reconstr Surg, 89(1), pp.1~8 (1992)
- G. S. Mundinger, "Distraction Osteogenesis for Surgical Treatment of Craniosynostosis: A Systematic Review", Plast Reconstr Surg, 138(3), pp.657~669 (2016)
- M. T. Ankrum, "K3Endo, ProTaper, and ProFile systems: breakage and distortion in severely curved roots of molars", J Endod, 30(4), pp.234~237 (2004)
- G. Hata, "A comparison of shaping ability using ProFile, GT file, and Flex-R endodontic instruments in simulated canals", J Endod, 28(4), pp.316~321 (2002)
- L. Ming-Yih, "Biomechanical stability analysis of rigid intraoral fixation for bilateral sagittal split osteotomy", J Plast Reconstr Aesthet Surg, 63(3), pp.451~455 (2010)
- T. W. Korioth, "Three-dimensional finite element stress analysis of the dentate human mandible", Am J Phys Anthropol, 88(1), pp.69~96 (1992)
- P. Maurer, "Study by finite element method of the mechanical stress of selected biodegradable osteosynthesis screws in sagittal ramus osteotomy", Br J Oral Maxillofac Surg, 40(1), pp.76~83 (2002)
- M. Chin, "Distraction osteogenesis in maxillofacial surgery using internal devices: review of five cases", J Oral Maxillofac Surg, 54(1), pp.45~53 (1996)
- K. L. Rafferty, "Mandibular mechanics following osteotomy and appliance placement II: Bone strain on the body and condylar neck", J Oral Maxillofac Surg, 64(4), pp.620~627 (2006)
- G. A. Ilizarov, "The principles of the Ilizarov method. 1988", Bull Hosp Jt Dis, 56(1), pp.49~53 (1997)
- P. Kessler, "Effects of distraction forces and frequency of distraction on bony regeneration", Br J Oral Maxillofac Surg, 43(5), pp.392~398 (2005)
- J. Wiltfang, "Continuous and intermittent bone distraction using a microhydraulic cylinder: an experimental study in minipigs", Br J Oral Maxillofac Surg, 39(1), pp.2~7 (2001)
- Boccaccio, A., "Comparison of different orthodontic devices for mandibular symphyseal distraction osteogenesis: a finite element study", Am J Orthod Dentofacial Orthop, 134(2), pp.260~269 (2008)
- I. H. Yu, "Evaluation of mandibular anatomy related to sagittal split ramus osteotomy using 3-dimensional computed tomography scan images", Int J Oral Maxillofac Surg, 37(6), pp.521~528 (2008)
- M. J. Kang, "A Study on Structural Durability due to the Configuration of Ripper at Excavator", Journal of the Korea Convergence Society, 5(2), pp.13~18 (2014)
- 이정익, "차량주행풍을 이용한 풍력발전 시스템 구축을 통한 실무 융합 교육 개발", 한국융합학회논문지, 5(4), pp.107~112 (2014), 한국융합학회