본문 바로가기
KERD
논문KCI 등재

설계신뢰도 및 정기검사주기가 저장신뢰도에 미치는영향에 관한 연구 : 일회성 군수장비 시스템을 대상으로

A Study on the Effect of Design Reliability and Periodic Inspection Cycle on Storage Reliability : Focusing on One-shot Logistic Equipment System

1

조회

0

다운로드

4

인용

0

참고문헌

키워드

주제분류학제간연구

초록

장시간 저장되어 있다가 사용되는 일회성 군수장비 시스템의 경우, 저장 시간이 지남에 따라 저장신뢰도에 변화가 발생하게 된다. 이에 사용시점이 도래하였을 때 제품 사용에 있어 저장신뢰도가 중요한 품질특성으로 작용하게 되며, 기존의 연구들은 저장신뢰도 향상을 위하여 최적의 정기검사주기 산출을 위한 연구에 초점이 맞춰져 있었다. 본 연구에서는 정기검사주기 뿐 아니라 설계신뢰도를 포함한 분석을 통해 융합적인 관점에서 저장신뢰도에 두 인자가 얼마나 영향을 미치는지 분석을 수행하였다. 이를 위해 일회성 시스템의 대표적인 제품인 유도탄에 기존의 Martinez 저장신뢰도 결정모델을 적용하여 각각 설계신뢰도와 정기검사주기가 미치는 정량적인 효과에 대하여 분석을 수행하였다. 분석 결과를 통해, 현 제품의 설계신뢰도 범주 내에서는 설계신뢰도보다는 정기검사주기 관리가 저장신뢰도 향상에 더 중요한 요인이라는 것을 확인해 볼 수 있었다.

Abstract

In the case of a one-shot logistic equipment system that has been stored for a long time, reliability changes with the passage of time. Therefore, when the time comes to use, the storage reliability of the product is an important quality characteristic, and the existing studies have focused on the research for calculating the optimal period inspection cycle to improve the storage reliability. In this study, we analyzed the influence of the two factors on the storage reliability at the convergence point by analyzing the design reliability as well as the periodic inspection cycle. To do this, we applied the existing Martinez storage reliability model to the missile, a representative product of a one-shot system, and analyzed the quantitative effects of the design reliability and the periodic inspection cycle. From the results of the analysis, it was confirmed that the maintenance of the periodic inspection cycle is more important for the improvement of the storage reliability than the design reliability in the design reliability category of the current product.

참고문헌 (18)

  1. 김석곤, "TLCSM 제도하 대함유도탄의 신뢰도 향상을 위한 RCM 적용에 관한 연구", 박사, 방위사업학과, pp.2012
  2. Defense Acquisition Program Administration, "Integrated Logistics Support Development Practical Guide", DAPA, ~ (2013)
  3. 김하원, "주기적 검사가 실시되는 원샷 시스템의 신뢰도 분석", 대한산업공학회지, 42(1), pp.20~29 (2016), 대한산업공학회[DOI]
  4. Availability, Reliability, Maintainability, and Capability, "H. Paul Barringer, P. E.", Barringer & Associates, Inc, ~ (1997)
  5. H. H. Yun, "Weapon System and Reliability", The Korean Society of Mechanical Engineers, 47(9), pp.47~52 (2007)
  6. Martinez, E. C., "Storage reliability with periodic Test", Proceeding Annual Reliability and Maintainability Symposium (1984)
  7. 김동규, "일회성 시스템의 저장신뢰도 결정 모델에 관한 연구", 한국경영과학회지, 38(1), pp.1~13 (2013), 한국경영과학회[DOI]
  8. S. C. Choi, "A Study on the Improvement for RAM for Weapon Systems", Journal of Applied Reliability, 8(1), pp.39~59 (2008)
  9. 김석곤, "야전 운용자료를 이용한 대함유도탄의 신뢰도 분석 연구", 한국전자통신학회 논문지, 6(6), pp.881~887 (2011), 한국전자통신학회
  10. 나일용, "야전 운용자료를 이용한 비 모수 통계 기반의 신뢰도 분석 기법 및 활용 방안 연구", 한국군사과학기술학회지, 13(4), pp.594~600 (2010), 한국군사과학기술학회
  11. 손정목, "야전운용제원을 활용한 RAM분석 사례: 해군함정을 중심으로", 한국콘텐츠학회 논문지, 12(12), pp.395~412 (2012), 한국콘텐츠학회[DOI]
  12. J. M. Rhee, "The Study on Estimating Preventive Maintenance period and Life cycle of Missile system", Korean Insitute Of Industrial Engineers, Conference Proceedings, pp.1172~1176 (2011)
  13. 김대익, "신뢰도 분석모델을 이용한 대함유도탄 검사주기 결정에 관한 연구", 한국국방경영분석학회지, 32(2), pp.92~113 (2006), 한국국방경영분석학회
  14. A Study of Engagement Effect of Anti-Ship Missile Defense Missile, "Korea National Defense University", KNDU, ~ (2012)
  15. 정상훈, "저장신뢰도 기반의 △△ 유도탄 검사주기 분석", 한국산학기술학회논문지, 18(4), pp.592~598 (2017), 한국산학기술학회[DOI]
  16. 조용석, "저장신뢰도 유지를 위한 최적 2단계 주기적 검사정책", Communications for Statistical Applications and Methods, 15(3), pp.387~402 (2008), 한국통계학회
  17. C. H. Um, "A Study on the Application of the Storage Reliability Condition Considering the Naval Guided Missile Operation Concept", The Korean Reliability Society, Conference Proceedings, pp.232~237 (2016)
  18. 박정희, "유도무기 연구개발사업의 합리적인 비용 추정을 위한 전산모델 보정방안 사례 연구(X 유도무기 유도조종장치 사례를 중심으로)", 디지털융복합연구, 12(5), pp.139~148 (2014), 한국디지털정책학회[DOI]

관련 논문AI추천

이 간행물의 다른 논문 (21건)