유도탄 점검주기 설정을 위한 고장 탐지율 산출 방안 및 적용 사례
A Method of Failure Detection Rate Calculation for Setting up of Guided Missile Periodic Test and Application Case
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Since guided missiles with the characteristics of the one-shot system remain stored throughout their entire life cycle, it is important to maintain their storage reliability until the launch. As part of maintaining storage reliability, period of preventive test is set up to perform preventive periodic test, in this case failure detection rate has a great effect on setting up period of preventive test to maintain storage reliability. The proposed method utilizes failure rate predicted by the software on the basis of MIL-HDBK-217F and failure mode analyzed through FMEA (Failure Mode and Effect Analysis) using data generated from the actual field. The failure detection rate of using the proposed method is applied to set periodic test of the actual guided missile. The proposed method in this paper has advantages in accuracy and objectivity because it utilizes a large amount of data generated in the actual field.
Abstract
Since guided missiles with the characteristics of the one-shot system remain stored throughout their entire life cycle, it is important to maintain their storage reliability until the launch. As part of maintaining storage reliability, period of preventive test is set up to perform preventive periodic test, in this case failure detection rate has a great effect on setting up period of preventive test to maintain storage reliability. The proposed method utilizes failure rate predicted by the software on the basis of MIL-HDBK-217F and failure mode analyzed through FMEA (Failure Mode and Effect Analysis) using data generated from the actual field. The failure detection rate of using the proposed method is applied to set periodic test of the actual guided missile. The proposed method in this paper has advantages in accuracy and objectivity because it utilizes a large amount of data generated in the actual field.
참고문헌 (13)
- "Failure Mode", Mechanism Distributions 2013, 2012
- Gallay, R., "Metallized film capacitor lifetime evaluation and failure mode analysis", Proceedings of the CASCERN Accelerator School Power Converters (2014)
- 정상훈, "저장신뢰도 기반의 △△ 유도탄 검사주기 분석", 한국산학기술학회논문지, 18(4), pp.592~598 (2017), 한국산학기술학회[DOI]
- 정승우, "목표 신뢰도를 고려한 원-샷 시스템의 최적검사정책", 한국산업경영시스템학회지, 40(4), pp.96~104 (2017), 한국산업경영시스템학회
- 김동규, "일회성 시스템의 저장신뢰도 결정 모델에 관한 연구", 한국경영과학회지, 38(1), pp.1~13 (2013), 한국경영과학회[DOI]
- 김하원, "주기적 검사가 실시되는 원샷 시스템의 신뢰도 분석", 대한산업공학회지, 42(1), pp.20~29 (2016), 대한산업공학회[DOI]
- Lee, J.M, "The study on estimating preventive maintenance period and life cycle of missile system", Proceedings of Korea Institute of Industrial Engineers Autumn Academic Conference, pp.1172~1176 (2011)
- Martinez, E.C., "Storage reliability with periodic test", Reliability and Maintainability Symposium, pp.181~185 (1984)
- "Practice Guidelines of Ammunition ILS", Ammunition Support Command, ~ (2018)
- "Reliability Prediction of Electronic Equipment(MILHDBK-217F)", U.S. Department of Defense, ~ (1991)
- 서준호, "전자부품 고장모드를 고려한 Built-In-Test 성능분석", 한국항공우주학회지, 43(5), pp.449~455 (2015), 한국항공우주학회
- "The Rome Laboratory Reliability Engineer’s Toolkit", U.S Air Force Materiel Command (AFMC), ~ (1993)
- Vasina, P., "Failure modes of tantalum capacitors made by different technologies", Microelectronics Reliability, 42(6), pp.849~854 (2002)