차폐 재료의 융합과 개질제 특성에 따른 의료방사선 차폐 시트 물리적 특성 고찰
Physical Properties of Medical Radiation Shielding Sheet According to Shielding Materials Fusion and Resin Modifier Properties
0
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
의료방사선 방어를 위해 사용되는 차폐 시트의 제조과정에서 인장강도를 유지하면서 차폐 재료의 충전율을 높여 차폐 성능을 향상시키는 방안을 제시하고자 한다. 본 연구에서 제안된 개질제는 고분자 수지재료와의 융합에 있어서 분자량을 높여 재료의 친화성을 높이는 역할을 수행한다. 차폐시트의 산화텅스텐의 충전율과 인장강도, 차폐 성능 등을 평가하였다. 공정과정에서 개질제는 분자량과 밀도를 증가시켰고, 성형 과정에서 퍼짐 형상이 적용되었고, 성능 향상과 재료와의 친화성, 인장강도를 유지하기 위해 사용된 개질제 PMMA는 20%를 혼합할 경우 가장 우수한 효과를 얻을 수 있다. 본 연구에서 제시된 재료의 융합과 개질제를 통해 차폐시트의 대량생산이 가능하며, 향후 경량의 차폐복 제작에 기여할 것입니다.
Abstract
The modifier proposed in this research is for enhancing the affinity of the glass component with the high polymer resin and the molecular weight. The particle packing, tensile strength and shielding performance of the shielding sheet made of the tungsten oxide were evaluated. The best effect can be obtained when 20% of the modifier PMMA used to improve the shielding performance and maintain the affinity and strength with the sealant is mixed. The fusion of the materials presented in this study and the mass production of the shielding sheet through the modifier are possible and will contribute to the production of lightweight shielding sheets in the future.
참고문헌 (23)
- K. Yue, "A New Lead-free Radiation Shielding Material for Radiotherapy", Radiation Protection Dosimetry, 133(4), pp.256~260 (2009)[DOI]
- Siqi Xu, "A novel ultra-light structure for radiation shielding", Materials & Design, 31(4), pp.2140~2146 (2010), Elsevier BV[DOI]
- W Stam, "Inspection of Lead Aprons: A Practical Rejection Model", Health Physics, 95(suppl 2), pp.S133~S136 (2008), Ovid Technologies (Wolters Kluwer Health)[DOI]
- 권나연, "나노-마이크로 크기 하이브리드 구조 텅스텐 분말특성에 미치는 분말혼합 공정의 영향", 한국분말재료학회지, 24(5), pp.384~388 (2017), 한국분말재료학회[DOI]
- 서선열, "중증외상환자 CT 검사 시 검사보조자의 방사선피폭 경감을 위한 융합적 망토 차폐체의 유용성 연구", 한국융합학회논문지, 8(9), pp.211~216 (2017), 한국융합학회[DOI]
- I. Akkurt, "Gamma-ray shielding properties of concrete including barite at different energies", Progress in Nuclear Energy, 52(7), pp.620~623 (2010), Elsevier BV[DOI]
- N.Z. Noor Azman, "Characterisation of micro-sized and nano-sized tungsten oxide-epoxy composites for radiation shielding of diagnostic X-rays", Materials Science and Engineering: C, 33(8), pp.4952~4957 (2013), Elsevier BV[DOI]
- N.Z. Noor Azman, "Effect of particle size, filler loadings and x-ray tube voltage on the transmitted x-ray transmission in tungsten oxide—epoxy composites", Applied Radiation and Isotopes, 71(1), pp.62~67 (2013), Elsevier BV[DOI]
- 김대호, "최대 신호 대 잡음비를 이용한 방사선 방어용 앞치마의 융복합 성능평가", 디지털융복합연구, 13(10), pp.377~383 (2015), 한국디지털정책학회[DOI]
- Seon Chil Kim, "Physical analysis of the shielding capacity for a lightweight apron designed for shielding low intensity scattering X-rays", Scientific Reports, 6(1), pp.1~7 (2016), Springer Nature[DOI]
- A. Koski, "Effect of molecular weight on fibrous PVA produced by electrospinning", Materials Letters, 58(3-4), pp.493~497 (2004), Elsevier BV[DOI]
- François Ganachaud, "Molecular Weight Characterization of Poly(N-isopropylacrylamide) Prepared by Living Free-Radical Polymerization", Macromolecules, 33(18), pp.6738~6745 (2000), American Chemical Society (ACS)[DOI]
- 최선미, "실란 커플링제로 처리된 실리카가 탄성에폭시의 경화온도 및 기계적 물성에 미치는 영향", 엘라스토머 및 콤포지트, 43(3), pp.147~156 (2008), 한국고무학회
- J.H. Hubbell, "Photon mass attenuation and energy-absorption coefficients", The International Journal of Applied Radiation and Isotopes, 33(11), pp.1269~1290 (1982), Elsevier BV[DOI]
- S. S. Ray, , Progress in Polymer Science, 28, pp.1539~ (2003)
- Jiao-Ping Yang, "Simultaneous improvements in the cryogenic tensile strength, ductility and impact strength of epoxy resins by a hyperbranched polymer", Polymer, 49(13-14), pp.3168~3175 (2008), Elsevier BV[DOI]
- C Stéphan, "Characterization of singlewalled carbon nanotubes-PMMA composites", Synthetic Metals, 108(2), pp.139~149 (2000), Elsevier BV[DOI]
- Zhijie Jia, "Study on poly(methyl methacrylate)", carbon nanotube composites, 1999, pp.271(1-2), 395~400[DOI]
- Atsuhiko M. SUKEGAWA, "Development of Flexible Neutron-Shielding Resin as an Additional Shielding Material", Journal of Nuclear Science and Technology, 48(4), pp.585~590 (2011), Informa UK Limited[DOI]
- Le Chang, "Preparation and characterization of tungsten", epoxy composites for γ-rays radiation shielding, 2015, pp.356-357, 88~93[DOI]
- Shams A.M. Issa, "Effect of Bi 2 O 3 in borate-tellurite-silicate glass system for development of gamma-rays shielding materials", Journal of Alloys and Compounds, 695, pp.302~310 (2017), Elsevier BV[DOI]
- R. Li, "Effect of particle size on gamma radiation shielding property of gadolinium oxide dispersed epoxy resin matrix composite", Materials Research Express, 4(3), pp.1~10 (2017)[DOI]
- S.C. Kim, "Analysis of low-dose radiation shield effectiveness of multi-gate polymeric sheets", Radiation Effects and Defects in Solids, 169(7), pp.584~591 (2014), Informa UK Limited[DOI]