본문 바로가기
KERD
논문KCI 등재

Preparation and Radiation-resistance Characterization of LDPE/phPOSS Nanocomposites

0

조회

0

다운로드

0

인용

0

참고문헌

키워드

초록

In this study, we demonstrated that low-density polyethylene (LDPE)/octaphenyl polyhedraloligomeric silsequioxanes (phPOSS) nanocomposites exhibited the improved radiation resistancein comparision to that of pure LDPE. The LDPE/phPOSS nanocomposites were prepared bymelt blending at the different compositions and then exposed to γ-irradiation at the various dosesranging from 50 to 500 kGy. The radiation resistance of the irradiated nanocomposites were investigatedin terms of tensile property, oxygen induction temperature, decomposition temperature,and oxidation extent. The various analytical results revealed that the incorporation of phPOSS intothe LDPE matrix could enhance the radiation resistance of pure LDPE because of the protectiveeffect of the phenyl groups existing in the phPOSS. This simple and effective strategy can be usedin the development of new radiation-resistant materials for the equipments and components ofnuclear power plants.

Abstract

In this study, we demonstrated that low-density polyethylene (LDPE)/octaphenyl polyhedraloligomeric silsequioxanes (phPOSS) nanocomposites exhibited the improved radiation resistancein comparision to that of pure LDPE. The LDPE/phPOSS nanocomposites were prepared bymelt blending at the different compositions and then exposed to γ-irradiation at the various dosesranging from 50 to 500 kGy. The radiation resistance of the irradiated nanocomposites were investigatedin terms of tensile property, oxygen induction temperature, decomposition temperature,and oxidation extent. The various analytical results revealed that the incorporation of phPOSS intothe LDPE matrix could enhance the radiation resistance of pure LDPE because of the protectiveeffect of the phenyl groups existing in the phPOSS. This simple and effective strategy can be usedin the development of new radiation-resistant materials for the equipments and components ofnuclear power plants.

참고문헌 (27)

  1. Alshaketheep T, "Effect of insulator environment on thermal ageing estimations for ethylene propylene rubber insulated nuclear power plant cables", J. Nucl. Sci. Technol. (Tokyo, Jpn.), 53, pp.1366~1370 (2016)
  2. Ayandele E, "Polyhedral oligomeric silsesquioxane silsesquioxane(POSS)-containing polymer nanocomposites", Nanomaterials, 2, pp.445~475 (2012)
  3. Blanco I, "Influence of symmetry", asymmetry of the nanoparticles structure on the thermal stability of polyhedral oligomeric silsesquioxanes, Polym. Compos, pp.2012, 33[DOI]
  4. Boguski J, "Benefits and drawbacks of selected condition monitoring methods applied to accelerated radiation aged cable", Polym. Test, 53, pp.197~203 (2016)
  5. Boguski J, "New monitoring by thermogravimetry for radiation degradation of EVA", Radiat. Phys. Chem, 100, pp.49~53 (2014)
  6. Borjanovic V, "Proton- radiation resistance of poly(ethylene terephthalate)- nanodiamond-graphene nanoplatelet nanocomposites", J. Mater. Sci, 51, pp.1006~1016 (2016)
  7. Chang S, "Fabrication and high radiation-resistant properties of functionalized carbon nanotube reinforced novolac epoxy resin nanocomposite coatings", RSC Adv, 6, pp.58296~58301 (2016)
  8. Christian JH, "Developing radiation tolerant polymer nanocomposites using C60 as an additive", RSC Adv, 6, pp.40785~40792 (2016)
  9. Dadbin S, "Molecular structure and physical properties of E-Beam crosslinked low-density polyethylene for wire and cable insulation applications", J. Appl. Polym. Sci, 86, pp.1959~1969 (2002)
  10. Davenas J, "Stability of polymers under ionising radiation: The many faces of radiation interactions with polymers", Nucl. Instrum. Methods Phys. Res, 191, pp.653~661 (2002)
  11. Delides CG, "The protective effect of phenyl group on the crosslinking of irradiated dimethyldiphenylsiloxane", Radiat. Phys. Chem, 16, pp.345~352 (1980)
  12. Diao S, "The effect of phenyl modified fumed silica on radiation resistance of silicone rubber", Mater. Chem. Phys, 129, pp.202~208 (2011)
  13. Ferry M, "Irradiation of ethylene", styrene copolymers:evidence of sensitization of the aromatic moiety as counterpart of the radiation protection effect, 2012, pp.116, 1772~1776
  14. Hakkarainen M, "Environmental degradation of polyethylene", Adv. Polym. Sci, 169, pp.177~199 (2004)
  15. Hedrick JL, "Radiation resistant amorphousallaromatic polyarylene ether sulfones:synthesis, characterization, and mechanical properties", J. Polym. Sci, 23, pp.287~300 (1986)
  16. Jung C-H, "Fabrication and characterization of radiation- resistant LDPE", MWCNT nanocopmosites, 2013, pp.438, 41~45
  17. Laine RM, "Polyhedral phenylsilsesquioxanes", Macromolecules, 44, pp.1073~1109 (2011)
  18. Lee SJ, "Properties and radiation resistance of aromatic polymer-based polyblends", J. Appl. Polym. Sci, 73, pp.1697~1705 (1999)
  19. Li G, "Polyhedral oligomeric silsesquioxane (POSS) polymers and copolymers: A Review", J. Inorg. Organomet. Polym. Mater, 11, pp.123~154 (2001)
  20. Liao Y-C, "Preparation and characterization of Bi2O3", XNBR flexible films for attenuating gmma rays, 2018, pp.29, 99~
  21. Nambiar S, "Polymer-composite materials for radiation protection", Appl. Mater. Interfaces, 4, pp.5717~5726 (2012)
  22. Pallon LKH, "The impact of MgO nanoparticle interface in ultra-insulating polyethylene nanocomposites for high voltage DC cables", J. Mater. Chem. A, 4, pp.8590~8601 (2016)
  23. Schmid M, "Determination of oxidation induction time and temperature by DSC", J. Therm. Anal. Calorim, 83, pp.367~371 (2006)
  24. Sharma BK, "Gamma radiation aging of EVA", EPDM blends: Effect of vinyl acetate (VA) content and radiation dose on the alteration in mechanical, thermal, and morphological behavior, 2018, pp.135, 46216~
  25. Seguhi T, "Degradation mechanisms of cable insulation materials during radiation-thermal ageing in radiation environment", Radiat. Phys. Chem, 80, pp.268~273 (2011)
  26. Setnescu R, "Chemiluminescence study on irradiated low-density polyethylene containing various photo-stabilisers", Polym. Degrad. Stab, 84, pp.475~481 (2004)
  27. Singh A, "Irradiation of polyethylene: Some aspects of crosslinking and oxidative degradation", Radiat. Phys. Chem, 56, pp.375~380 (1999)

관련 논문AI추천

방사선 가교 기술로 제조된 polyolefin/metal hydroxide 복합재료의 고온 열화 특성 및 난연성김정인, 김종규, 박종석, 오용현, 이병민, 임윤묵, 전준표, 정성인, 최재학(사)한국방사선산업학회 · 방사선산업학회지2024 · 제18권 제3호방사선에 의해 제조된 폴리에틸렌/폴리우레탄 블랜드의 고온 내열성 및 기계적 특성김동섭, 노영창, 박종석, 이장건, 정성인, 최재학(사)한국방사선산업학회 · 방사선산업학회지2021 · 제15권 제2호전자선 가교에 의한 HDPE/α-Al2O3 복합재료의 기계적 특성 평가강필현, 김태욱, 김현빈, 신범식, 전준표, 정승태(사)한국방사선산업학회 · 방사선산업학회지2011 · 제5권 제2호Enhanced Mechanical Properties of Functionalized Graphene Oxide/linear Low Density Polyethylene Composites Prepared by Melt Mixing이중희, 타파스 쿠일라, Naresh Chandra Murmu, Pranab Samanta, suman chhetri한국복합재료학회 · Composites Research2016 · 제29권 제4호전자선 조사에 따른 산화방지제 및 자외선안정제 첨가 HDPE의변색 영향과 열적 특성 분석강필현, 김현빈, 오승환, 전준표, 정승태(사)한국방사선산업학회 · 방사선산업학회지2013 · 제7권 제1호감마선 조사에 의하여 가교된 폴리에틸렌 발포 시트의 제조심기형, 이동훈, 정찬희, 최재학, 최준호, 황인태(사)한국방사선산업학회 · 방사선산업학회지2012 · 제6권 제3호

이 간행물의 다른 논문 (16건)