본문 바로가기
KERD
논문KCI 등재

P형수신기 사용자회로의 전기전자구성부품에 대한 고장모드영향분석

Failure Modes and Effects Analysis of Electronic and Electrical Components at the Use Circuit of P-Type Receiver

0

조회

0

다운로드

0

인용

0

참고문헌

키워드

초록

본 연구에서는 국내에서 중소형 건축물에 가장 많이 사용되고 있는 5회로 P형수신기를 타깃으로 선정하였고, 5회로 P형수신기의 사용자회로와 메인회로 중에서 사용자회로를 중심으로 전기전자부품에 대한 위험우선순위지수와 중요도를 도출하였다. 구성부품으로 분석하면 Cable에서 2개 모드, Switch 2개 모드, Capacitor 1개 모드, IC 1개 모드로 4개의 구성부품에서 차지하였다. 고장모드는 Cable의 poor contact/intermittent(112)와 arcing/sparking(121), Switch의 mechanical failure(301)과 intermittent/degraded operation(302), Capacitor의 high contact resistance(401) 및 IC의 drift(501)이었다. 중요도에서 가장 높게 나타난 고장모드는 Cable의 Poor contact/intermittent(112)와 Arcing/sparking(121),Diode의 Shorted(201)였다. P형수신기의 경우는 Cable의 연결하는 커넥터부분의 접속불량이 가장 문제였으며, 이런 접속부의 접속불량은 아크와 스파크를 동반하고 있어 주위가연물이 존재하면 화재뿐만 아니라 고장을 일으킬 수 있는 조건으로도 작용하였다. Cable과 Switch의 관리 및 내구성이 높은 부품의 변경으로 내구연한을 높일 수 있다. 본 연구는 인적재난 위기의 화재와 생활안전 위기의 생활용품안전에 활용가능하다.

Abstract

This study is aimed to reduce failure rates and failure modes through the arrangement of the list corresponding to the component of the electrical and electronic in the user circuit of a P-type receiver. This paper analyzes a user circuit of monitoring and alarm systems in buildings. In the user circuit, the heaviest failure modes are shown in cables. The results of a risk priority number (RPN) analysis shows that a total of 6 failure modes is shown in the parts of contact/intermittent (112) and arcing/sparking (121) of the cables. Moreover, a mechanical failure (301) and an intermittent/degraded operation (302) of On/Off switch, high contact resistance (401) of a capacitor, and a drift (501) of IC are the other modes of the failure. Consequently, we find that the part of frequent breakdown is the cable and verify that the defect of cable connectors causes lots of failures of user circuits such as contact/intermittent. We expect that these findings will contribute to increase the quality of firefighting supplies and their life-spans.

참고문헌 (10)

  1. Failure Mode and Effects Analysis (FMEA): A Guide for Continuous Improvement for the Semiconductor Equipment Industry, "Internatinal Sematech", ~ (1992)
  2. John, B. Bowles, "The New SAE FMECA Standard", Proc. Ann. Reliability & Maintainability Symp, pp.48~58 (1998)
  3. A Study on the Expected Service Life of 22.9㎸ Class Electrical Equipments, "KESCO", ~ (2009)
  4. 김윤복, "20KW이하 계통연계형 태양광발전시스템의 고장모드영향분석", Crisisonomy, 12(3), pp.157~167 (2016), 위기관리 이론과 실천
  5. Forum of Management Plan for Effective Useful Life of Firefighting Supplies Forum, "Korean Institute of Fire Science & Engineering", ~ (2016)
  6. Lim, Hyeon Kyo, "System Safety Engineering" (2012), Hansol Academy
  7. "Ministry of Government Legillaslation" (2016)[URL]
  8. PTC Inc., "Windchill Quality Solutions 10. 2(software)", ~ (2013)
  9. Reliability Analysis Center, "Electronic Parts Reliability Data", ~ (2011)
  10. Yeongnam News, "If Pressurization Type Extinguisher Mistake, ‘POP’…, Stored Pressure Type Fire Extinguisher Substitute", ~ (2016)

관련 논문AI추천

이 간행물의 다른 논문 (12건)