Evaluation of etched enamel using quantitative light-induced fluorescence
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
The purpose of this study is to evaluate the effect of etching on the ground and unground enamel using quantitative light-induced fluorescence (QLF). Thirty extracted incisors were used in the study. One-half of the labial surface of each tooth was ground with #400- grit SiC paper. The other half was left intact. Ground and intact surfaces were coated with nail varnish leaving rectangular windows of enamel uncoated. A 32% phosphoric acid gel was applied for 15, 30, 60 seconds. The mineral loss in terms of percentage of fluorescence (delta F) was assessed by QLF at baseline and after etching. Effect of etching time and mechanical pretreatment were analyzed with independent t-test and one-way ANOVA. Grinding the enamel before etching for 15 seconds and 30 seconds had a significant effect on demineralization. However, no significant difference in demineralization was observed between the ground and unground enamel with 60 seconds of etching. The ΔF values decreased with increased etching time. But there was no significant difference in the ΔF values between 15 seconds and 30 seconds, and 30 seconds and 60 seconds in both ground and unground enamel. Demineralization after acidetching can be quantified using QLF. The result indicated that the degree of demineralization increases with etching time and mechanical pretreatment.
Abstract
The purpose of this study is to evaluate the effect of etching on the ground and unground enamel using quantitative light-induced fluorescence (QLF). Thirty extracted incisors were used in the study. One-half of the labial surface of each tooth was ground with #400- grit SiC paper. The other half was left intact. Ground and intact surfaces were coated with nail varnish leaving rectangular windows of enamel uncoated. A 32% phosphoric acid gel was applied for 15, 30, 60 seconds. The mineral loss in terms of percentage of fluorescence (delta F) was assessed by QLF at baseline and after etching. Effect of etching time and mechanical pretreatment were analyzed with independent t-test and one-way ANOVA. Grinding the enamel before etching for 15 seconds and 30 seconds had a significant effect on demineralization. However, no significant difference in demineralization was observed between the ground and unground enamel with 60 seconds of etching. The ΔF values decreased with increased etching time. But there was no significant difference in the ΔF values between 15 seconds and 30 seconds, and 30 seconds and 60 seconds in both ground and unground enamel. Demineralization after acidetching can be quantified using QLF. The result indicated that the degree of demineralization increases with etching time and mechanical pretreatment.
참고문헌 (22)
- Swift EJ Jr, "Bonding to enamel and dentin: a brief history and state of the art, 1995", Quintessence Int, 26, pp.95~110 (1995)
- Shimada Y, "Effects of regional enamel and prism orientation on resin bonding", Oper Dent, 28, pp.20~27 (2003)
- Silverstone LM, "Variation in the pattern of acid etching of human dental enamel examined by scanning electron microscopy", Cares Res, 9, pp.373~387 (1975)[DOI]
- Silverstone LM, "Fissure sealants. Laboratory studies", Caries Res, 8, pp.2~26 (1974)
- Gwinnett AJ, "Structure and composition of enamel", Oper Dent, (suppl 5), pp.10~17 (1992)
- Tagami J, "Optimal technique of etching enamel", Oper Dent, 13, pp.181~184 (1988)
- Hafstroom-Bjoorkman U, "Comparison of laser fluorescence and longitudinal microradiography for quantitative assessment of in vitro enamel caries", Caries Res, 26, pp.241~247 (1992)[DOI]
- Al-Khateeb S, "Quantification of formation and remineralization of artificial enamel lesions with a new portable fluorescence device", Adv Dent Res, 11, pp.502~506 (1997)[DOI]
- de Josselin de Jong E, "A new method for in vivo quantification of changes in initial enamel caries with laser fluorescence", Caries Res, 29, pp.2~7 (1995)[DOI]
- Pretty IA, "The validation of quantitative light induced fluorescence to quantify acid erosion of human enamel", Arch Oral Biol, 49, pp.285~294 (2004)[DOI]
- Wu J, "Demineralization depth using QLF and a novel image processing software", Int J Dent, pp.1~7 (2010)
- Gwinnett AJ, "Adhesion and caries prevention. A preliminary report", Br Dent J, 119, pp.77~80 (1965)
- Gwinnett AJ, "Micromorphology of the bonded dentin interface and its relationship to bond strength", Am J Dent, 5, pp.73~77 (1992)
- Inoue M, "Effect of filler content of restorative resins on retentive strength to acid-conditioned enamel", Am J Dent, 7, pp.161~166 (1994)
- Speirs RL, "The nature of surface enamel in human teeth", Calcif Tissue Res, 8, pp.1~16 (1971)[DOI]
- Habelitz S, "Mechanical properties of human dental enamel on the nanometre scale", Arch Oral Biol, 46, pp.173~183 (2001)[DOI]
- Meola MT, "A scanning electron microscope study of the effect of etching time and mechanical pretreatment on the pattern of acid etching on the enamel of primary teeth", Int Dent J, 36, pp.49~53 (1986)
- Shinchi MJ, "The effect of phosphoric acid concentration on resin tag length and bond strength of a photo-cured resin to acid-etched enamel", Dent Mater, 16, pp.324~329 (2000)[DOI]
- Godoy F, "Effect of etching times and mechanical pretreatment on the enamel of primary teeth: An SEM study", Am J Dent, 4, pp.115~118 (1991)
- Nakata K, , Dent Mater J, 28, pp.523~529 (2009)[DOI]
- Pretty IA, "The effect of ambient light on QLF analyses", J Oral Rehabil, 29, pp.369~373 (2002)[DOI]
- Arends J, "Remineralisation of bovine dentine in vitro. The influence of the F content in solution on mineral distribution", Caries Research, 23, pp.309~314 (1989)[DOI]