본문 바로가기
KERD
논문KCI 등재

Enamel pretreatment with Er:YAG laser: effects on the microleakage of fissure sealant in fluorosed teeth

2

조회

0

다운로드

0

인용

0

참고문헌

키워드

주제분류치의학

초록

Objectives: The purpose of this in vitro study was to evaluate the microleakage and penetration of fissure sealant in permanent molar teeth with fluorosis after pretreatment of the occlusal surface. Materials and Methods: A total of 120 third molars with mild dental fluorosis were randomly divided into 6 groups (n = 20). The tooth surfaces were sealed with an unfilled resin fissure sealant (FS) material. The experimental groups included: 1) phosphoric acid etching (AE) + FS (control); 2) AE + One-Step Plus (OS, Bisco) + FS; 3) bur + AE + FS; 4) bur + AE + OS + FS; 5) Er:YAG laser + AE + FS; and 6) Er:YAG laser + AE + OS + FS. After thermocycling, the teeth were immersed in 0.5% fuchsin and sectioned. Proportions of mircoleakage (PM) and unfilled area (PUA) were measured by digital microscope. Results: Overall, there were significant differences among all groups in the PM (p = 0.00). Group 3 showed the greatest PM, and was significantly different from groups 2 to 6 (p < 0.05). Group 6 showed the lowest PM. Pretreatment with Er:YAG with or without adhesive led to less PM than bur pretreatment. There were no significant differences among groups in PUA. Conclusions: Conventional acid etching provided a similar degree of occlusal seal in teeth with fluorosis compared to those pretreated with a bur or Er:YAG laser. Pretreatment of pits and fissures with Er:YAG in teeth with fluorosis may be an alternative method before fissure sealant application.

Abstract

Objectives: The purpose of this in vitro study was to evaluate the microleakage and penetration of fissure sealant in permanent molar teeth with fluorosis after pretreatment of the occlusal surface. Materials and Methods: A total of 120 third molars with mild dental fluorosis were randomly divided into 6 groups (n = 20). The tooth surfaces were sealed with an unfilled resin fissure sealant (FS) material. The experimental groups included: 1) phosphoric acid etching (AE) + FS (control); 2) AE + One-Step Plus (OS, Bisco) + FS; 3) bur + AE + FS; 4) bur + AE + OS + FS; 5) Er:YAG laser + AE + FS; and 6) Er:YAG laser + AE + OS + FS. After thermocycling, the teeth were immersed in 0.5% fuchsin and sectioned. Proportions of mircoleakage (PM) and unfilled area (PUA) were measured by digital microscope. Results: Overall, there were significant differences among all groups in the PM (p = 0.00). Group 3 showed the greatest PM, and was significantly different from groups 2 to 6 (p < 0.05). Group 6 showed the lowest PM. Pretreatment with Er:YAG with or without adhesive led to less PM than bur pretreatment. There were no significant differences among groups in PUA. Conclusions: Conventional acid etching provided a similar degree of occlusal seal in teeth with fluorosis compared to those pretreated with a bur or Er:YAG laser. Pretreatment of pits and fissures with Er:YAG in teeth with fluorosis may be an alternative method before fissure sealant application.

참고문헌 (42)

  1. Beauchamp J, "American Dental Association Council on Scientific Affairs. Evidence-based clinical recommendations for the use of pit-and-fissure sealants: a report of the American Dental Association Council on Scientific Affairs", J Am Dent Assoc, 139, pp.257~268 (2008)
  2. Simonsen RJ., "Pit and fissure sealant: review of the literature", Pediatr Dent, 24, pp.393~414 (2002)
  3. Sasa I, "Sealants: a review of the materials and utilization", J Calif Dent Assoc, 38, pp.730~734 (2010)
  4. Cehreli ZC, "Quantitative microleakage evaluation of fissure sealants applied with or without a bonding agent: results after four-year water storage in vitro", J Adhes Dent, 10, pp.379~384 (2008)
  5. Subramaniam P, "Effect of tooth preparation on sealant success-an in vitro study", J Clin Pediatr Dent, 33, pp.325~331 (2009)
  6. Chaitra TR, "Microleakage and SEM analysis of flowable resin used as a sealant following three fissure preparation techniquesan in vitro study", J Clin Pediatr Dent, 35, pp.277~282 (2011)
  7. Geiger SB, "Improving fissure sealant quality: mechanical preparation and filling level", J Dent, 28, pp.407~412 (2000)
  8. Lupi-Pegurier L, "Microleakage of a pit-and-fissure sealant: effect of air-abrasion compared with classical enamel preparations", J Adhes Dent, 6, pp.43~48 (2004)
  9. Agrawal A, "Comparison of six different methods of cleaning and preparing occlusal fissure surface before placement of pit and fissure sealant: an in vitro study", J Indian Soc Pedod Prev Dent, 30, pp.51~55 (2012)
  10. Mazzoleni S, "Comparative evaluation of different techniques of surface preparation for occlusal sealing", Eur J Paediatr Dent, 8, pp.119~123 (2007)
  11. Olivi G, "Pediatric laser dentistry. A user's guide", pp.83~85 (2011), Quintessence Publishing Co, Inc
  12. "Council on Clinical Affairs: Policy on the use of lasers for pediatric pental patients" (2013)[URL]
  13. Sancakli HS, "Effects of Er : YAG laser and air abrasion on the microleakage of a resin-based fissure sealant material", Photomed Laser Surg, 29, pp.485~492 (2011)
  14. Lasmar MF, "Enamel demineralization and bracket bond strength when etching with acid and⁄or Er:YAG laser", Aust Dent J, 57, pp.190~195 (2012)
  15. Lupi-Pégurier L, "Microleakage of resin-based sealants after Er : YAG laser conditioning", Lasers Med Sci, 22, pp.183~188 (2007)
  16. Baygin O, "The effect of different enamel surface treatments on the microleakage of fissure sealants", Lasers Med Sci, 27, pp.153~160 (2012)
  17. Borsatto MC, "Microleakage at sealant", enamel interface of primary teeth : effect of Er : YAG laser ablation of pits and fissures, 2004, pp.71, 143~147
  18. Karaman E, "Comparison of acid versus laser etching on the clinical performance of a fissure sealant : 24-month results", Oper Dent, 38, pp.151~158 (2013)
  19. Manhart J, "Influence of the pretreatment of occlusal pits and fissures on the retention of a fissure sealant", Am J Dent, 17, pp.12~18 (2004)
  20. Youssef MN, "Effect of enamel preparation method on in vitro marginal microleakage of a flowable composite used as pit and fissure sealant", Int J Paediatr Dent, 16, pp.342~347 (2006)
  21. Khogli AE, "Microleakage and penetration of a hydrophilic sealant and a conventional resin-based sealant as a function of preparation techniques: a laboratory study", Int J Paediatr Dent, 23, pp.13~22 (2013)
  22. Loyola-Rodriguez JP, "Flowable resin used as a sealant in molars affected by dental fluorosis: a comparative study", J Clin Pediatr Dent, 30, pp.39~43 (2005)
  23. Denbesten P, "Chronic fluoride toxicity: dental fluorosis", Monogr Oral Sci, 22, pp.81~96 (2011)
  24. Torres-Gallegos I, "Enamel roughness and depth profile after phosphoric acid etching of healthy and fluorotic enamel", Aust Dent J, 57, pp.151~156 (2012)
  25. Ateyah N, "Factors affecting shear bond strength of composite resin to fluorosed human enamel", Oper Dent, 25, pp.216~222 (2000)
  26. Al-Sugair MH, "Effect of fluorosis on etching of human enamel", J Oral Rehabil, 26, pp.521~528 (1999)
  27. Opinya GN, "Tensile bond strength of fluorosed Kenyan teeth using the acid etch technique", Int Dent J, 36, pp.225~229 (1986)
  28. Ciucchi P, "Evaluation of different types of enamel conditioning before application of a fissure sealant", Lasers Med Sci (2013)
  29. Hossain M, "Removal of organic debris with Er:YAG laser irradiation and microleakage of fissures sealants in vitro", Lasers Med Sci, 27, pp.895~902 (2012)
  30. Salama FS, "Marginal seal of sealant and compomer materials with and without enameloplasty", Int J Paediatr Dent, 12, pp.39~46 (2002)
  31. Burrow JF, "Pits and fissures: relative space contribution in fissures from sealants, prophylaxis pastes and organic remnants", Aust Dent J, 48, pp.175~179 (2003)
  32. Burrow MF, "Pits and fissures: etch resistance in prismless enamel walls", Aust Dent J, 46, pp.258~262 (2001)
  33. Almerich-Silla JM, "Caries and dental fluorosis in a western Saharan population of refugee children", Eur J Oral Sci, 116, pp.512~517 (2008)
  34. Blackwood JA, "fissure enameloplasty and air abrasion on sealant microleakage", Pediatr Dent, 24, pp.199~203 (2002)
  35. Walsh LJ., "The current status of laser applications in dentistry", Aust Dent J, 48, pp.146~155 (2003)
  36. Moshonov J, "Acid-etched and erbium:yttrium aluminium garnet laser-treated enamel for fissure sealants: a comparison of microleakage", Int J Paediatr Dent, 15, pp.205~209 (2005)
  37. 손정혜, "THE EFFECT OF Er,Cr:YSGG IRRADIATION ON MICROTENSILE BOND STRENGTH OF COMPOSITE RESIN RESTORATION", Restorative Dentistry and Endodontics, 35(2), pp.134~142 (2010), 대한치과보존학회
  38. Lygidakis NA, "Retention of fissure sealants using two different methods of application in teeth with hypomineralised molars (MIH): a 4 year clinical study", Eur Arch Paediatr Dent, 10, pp.223~236 (2009)
  39. Memarpour M, "Comparison of 3 one-bottle adhesives on fissure sealant microleakage: an in vitro study", J Dent Child (Chic), 80, pp.16~19 (2013)
  40. 김정호, "접착시스템의 종류에 따른 유동성 레진과 법랑질의 미세전단 결합강도", Restorative Dentistry and Endodontics, 36(1), pp.50~58 (2011), 대한치과보존학회
  41. Kakaboura A, "In vitro study of penetration of flowable resin composite and compomer into occlusal fissures", Eur J Paediatr Dent, 3, pp.205~209 (2002)
  42. Kantovitz KR, "Marginal adaptation of pit and fissure sealants after thermal and chemical stress", A SEM study. Am J Dent, 21, pp.377~382 (2008)

관련 논문AI추천

이 간행물의 다른 논문 (14건)