본문 바로가기
KERD
논문KCI 등재

일부 세치제와 주방세제 사용에 의한 의치상 레진의 표면변화

Surface changes of denture base resin according to two toothpastes and a kitchen detergent

2

조회

0

다운로드

9

인용

0

참고문헌

키워드

주제분류치의학

초록

Objectives : This study evaluated the changes in surface roughness of denture base resin according to the types of denture cleansers. Methods : A denture base resin(Vertex RS, Dentimax, Netherland) was used. Two toothpaste(Antiplaque,Bukwang, Korea; 2080, Aekyung, Korea) and a kitchen detergent(Trio, Aekyung, Korea) were used as a denture cleanser. The specimens were put on the V8 crossbrushing machine(Sabri enterprises, Downers grove, IL, USA) to reproduce toothbrushing and the toothbrushes were flat, round end and soft type. The surfaces of denture base resin specimens were observed by profilometer(SJ-400, MITUTOYO, Japan) and SEM(S-3000N, Hitachi Co., Ibaraki, Japan). Results : 1. According to the result of measuring surface roughness, there was statistically significant difference in Ra, Rq, and Rz(p<0.05). 2. As for Ra, Rq and Rz, Antiplaque toothpaste showed the highest roughness, and there was significant difference from other groups(p<0.01). 2080 toothpaste, Trio, and distilled water were classified as the same group. 3. According to the result of observation with the SEM,the surfaces of the Antiplaque toothpaste group after toothbrushing showed the greatest roughness, and the surfaces of 2080 toothpaste, Trio, and distilled water groups were rough in order. Trio and distilled water had the surfaces similar to those before toothbrushing. Conclusions : Studies to compare the efficacy of denture management methods and examine the effects of denture cleansers on denture materials will be helpful for dental hygienists and dentists providing patients with proper information and education. And it will be also useful for denture users’ oral health.

Abstract

Objectives : This study evaluated the changes in surface roughness of denture base resin according to the types of denture cleansers. Methods : A denture base resin(Vertex RS, Dentimax, Netherland) was used. Two toothpaste(Antiplaque,Bukwang, Korea; 2080, Aekyung, Korea) and a kitchen detergent(Trio, Aekyung, Korea) were used as a denture cleanser. The specimens were put on the V8 crossbrushing machine(Sabri enterprises, Downers grove, IL, USA) to reproduce toothbrushing and the toothbrushes were flat, round end and soft type. The surfaces of denture base resin specimens were observed by profilometer(SJ-400, MITUTOYO, Japan) and SEM(S-3000N, Hitachi Co., Ibaraki, Japan). Results : 1. According to the result of measuring surface roughness, there was statistically significant difference in Ra, Rq, and Rz(p<0.05). 2. As for Ra, Rq and Rz, Antiplaque toothpaste showed the highest roughness, and there was significant difference from other groups(p<0.01). 2080 toothpaste, Trio, and distilled water were classified as the same group. 3. According to the result of observation with the SEM,the surfaces of the Antiplaque toothpaste group after toothbrushing showed the greatest roughness, and the surfaces of 2080 toothpaste, Trio, and distilled water groups were rough in order. Trio and distilled water had the surfaces similar to those before toothbrushing. Conclusions : Studies to compare the efficacy of denture management methods and examine the effects of denture cleansers on denture materials will be helpful for dental hygienists and dentists providing patients with proper information and education. And it will be also useful for denture users’ oral health.

참고문헌 (46)

  1. "The 2010 Population and Housing Census"[URL]
  2. 김영숙, "의치 장착 노인과 임플란트 장착 노인의 저작능력 및 삶의 질 비교 연구", 한국치위생학회지, 11(5), pp.629~636 (2011), 한국치위생학회
  3. Yoneyama T, "Oral care and pneumonia", Lancet, 354(9177), pp.515~ (1999), Oral Care Working Group
  4. Gornitsky M, "A clinical and microbiological evaluation of denture cleansers for geriatric patients in long term care institutions", J Can Dent Assoc, 68(1), pp.39~45 (2002)
  5. Salles AE, "Comparative analysis of biofilm levels in complete upper and lower dentures after brushing associated with specific denture paste and neutral soap", Gerodontology, 24(4), pp.217~223 (2007)
  6. Harrison Z, "An in vitro study into the effect of a limited range of denture cleaners on surface roughness and removal of Candida albicans from conventional heat-cured acrylic resin denture base material", J Oral Rehabil, 31(5), pp.460~467 (2004)
  7. Neppelenbroek KH, "Hardness of heat-polymerized acrylic resins after disinfection and long-term water immersion", J Prosthet Dent, 93(2), pp.171~176 (2005)
  8. Glass RT, "Partial spectrum microorganisms found in dentures and possible disease implications", J Am Osteopath Assoc, 101(2), pp.92~94 (2001)
  9. McCabe JF, "The efficacy of denture cleansers", Eur J Prosthodont Restor Dent, 3(5), pp.203~207 (1995)
  10. Paranhos Hde F, "Distribution of biofilm on internal and external surfaces of upper complete dentures: the effect of hygiene instruction", Gerodontology, 24(3), pp.162~168 (2007)
  11. Freitas-Pontes KM, "Mass loss of four commercially available heat-polymerize acrylic resins after toothbrushing with three different dentifrices", J Appl Oral Sci, 17(2), pp.116~121 (2009)
  12. Dyer D, "Abrasion and stain removal by different manual toothbrushes and brush actions: studies in vitro", J Clin Periodontol, 28(2), pp.121~127 (2001)
  13. de Freitas KM, "Weight loss of five commercially available denture teeth after toothbrushing with three different dentifrices", J Appl Oral Sci, 14(4), pp.242~246 (2006)
  14. Haselden CA, "Comparison between the wear resistance of three types of denture resin to three different dentifrices", J Oral Rehabil, 25(5), pp.335~339 (1998)
  15. Pisani MX, "Evaluation of the abrasiveness of Dentifrices for Complete Dentures", J Prosthodont, 19(5), pp.369~373 (2010)
  16. Manly RS, "A method for measruement of abrasion of dentin by toothbrush and dentifrice", J Dent Res, 44, pp.533~540 (1965)
  17. Vieira DF, "Influence of certain variables on the abrasion of acrylic resin veneering materials", J Prosthet Dent, 12, pp.720~731 (1962)
  18. Camargo IM, "Abrasiveness evaluation of silica and calcium carbonate used in the production of dentifrices", J Cosmet Sci, 52(3), pp.163~167 (2001)
  19. Heath JR, "The effect of dentifrices on restorative materials", J Oral Rehabil, 1(1), pp.47~54 (1974)
  20. Heath JR, "The abrasion of acrylic resin by cleaning pastes", J Oral Rehabil, 10(2), pp.159~175 (1983)
  21. Murray ID, "The relationship between the abrasivity and cleaning power of the dentifrice-type denture cleaners", Br Dent J, 161(6), pp.205~228 (1986)
  22. Peracini A, "Effect of denture cleansers on physical properties of heat- polymerized acrylic resin", J Prosthodont Res, 54(2), pp.78~83 (2010)
  23. Budtz-Jørgensen E, "Materials and methods for cleaning denture", J Prosthet Dent, 42(6), pp.619~623 (1979)
  24. Murata H, "Compatibility of tissue conditioners and denture cleansers: influence on surface conditions", Dent Mater J, 29(4), pp.446~453 (2010)
  25. Paranhos HF, "Effect of three methods for cleaning dentures of biofilms formed in vitro on acrylic resin", J Prosthodont, 18(5), pp.427~431 (2009)
  26. Murata H, "Compatibility of tissue conditioners and denture cleansers: influence on surface conditions", Dent Mater J, 29(4), pp.446~531 (2010)
  27. Dikbas I, "Investigation of the cleanliness of denture in a university hospital", Int J Prosthodont, 19(3), pp.294~298 (2006)
  28. Budtz-Jrgensen E, "The significance of Candida albicans in denture stomatitis", Scand J Dent Res, 82(2), pp.151~190 (1974)
  29. 김혜진, "일부 노인의 보철장착에 따른 구강건강행태와 구강관리 요구도 조사", 한국치위생학회지, 9(4), pp.824~835 (2009), 한국치위생학회
  30. ISO, "Dentistry-Base polmer Part 1: Denture base polymers", ISO 20795-1, ~ (2008)
  31. Kim JB, "Clinical Preventive Dentistry. 3rd edition", pp.103~ (2000), Komoonsa
  32. 하정은, "일부 시판세치제의 비교치아마모도에 관한 연구", 대한구강보건학회지, 35(1), pp.18~22 (2011), 대한구강보건학회
  33. Scurria MS, "Surface roughness of two polished ceramic materials", J Prosthet Dent, 71(2), pp.174~177 (1994)
  34. Ayad MF, "Surface roughness of dentin after tooth preparation with different rotary instrumentation", J Prosthet Dent, 75(2), pp.122~128 (1996)
  35. Bessing C, "Comparison of two different methods of polishing porcelain", Scan J Dent Res, 91(6), pp.482~487 (1983)
  36. Fermandes RA, "Efficacy of three denture brushes on biofilm removal from complete denture", J Appl Oral Sci, 15(1), pp.39~43 (2007)
  37. Keng SB, "Denture plaque distribution and effectiveness of a perborate-containing denture cleanse", Quintessence Int, 24(5), pp.341~345 (1996)
  38. Shay K, "Denture Hygiene: A review and update", J Contemp Dent Pract, 1(2), pp.28~41 (2000)
  39. Nikawa H, "Denture plaque-past and recent concerns", J Dent, 26(4), pp.299~304 (1998)
  40. Survey on the 2010 National Oral Health, "Korean Dental Association", Ministry of Health & Welfare, 518~ (2010)
  41. 이재영, "민간의치세정제재들의 항균력, 정균력 및 의치상 마모력에 대한 평가", 대한구강보건학회지, 34(1), pp.18~27 (2010), 대한구강보건학회
  42. Jagger DC, "The effectiveness of seven denture cleansers on tea stain removal from PMMA acrylic res", Int J Prosthodont, 15(6), pp.549~552 (2002)
  43. Berger JC, "Thompson G. Surface roughness of denture base acrylic resins after processing and after polishing", J Prosthodont, 15(3), pp.180~186 (2006)
  44. Verran J, "Retention of Candida albicans on acrylic resin and silicone of different surface topography", J Prosthet Dent, 77(5), pp.535~539 (1997)
  45. Yap AU, "Effect of hygiene maintenance procedures on surface roughness of composite restoratives", Oper Dent, 30(1), pp.99~104 (2005)
  46. Oliveira LV, "The effect of brushing on surface roughness of denture lining materials", J Prosthodont, 16(3), pp.179~184 (2007)

관련 논문AI추천

이 간행물의 다른 논문 (19건)