가상물리시스템 개념을 이용한 임베디드 제어 네트워크 시스템 설계에 관한 연구
Study on Design of Embedded Control Network System using Cyber Physical System Concept
0
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
Recent advances in electronics have enabled various conventional products to incorporate with numerous powerful microcontroller. Generally, an embedded system is a computer system designed for specific control functions within a larger system, often with real-time computing constraints. The growing performance and reliability of hardware components and the possibilities brought by various design method enabled implementing complex functions that improve the comport of the system’s occupant as well as their safety. A cyber physical system (CPS) is a system featuring a tight combination of, and coordination between, the system’s computational and physical elements. The concept of cyber physical system, including physical elements, cyber elements, and shared networks, has been introduced due to two general reasons: design flexibility and reliability. This paper presents a cyber physical system where system components are connected to a shared network, and control functions are divided into small tasks that are distributed over a number of embedded controllers with limited computing capacity. In order to demonstrate the effectiveness of cyber physical system, an unmanned forklift with autonomous obstacle avoidance ability is implemented and its performance is experimentally evaluated.
Abstract
Recent advances in electronics have enabled various conventional products to incorporate with numerous powerful microcontroller. Generally, an embedded system is a computer system designed for specific control functions within a larger system, often with real-time computing constraints. The growing performance and reliability of hardware components and the possibilities brought by various design method enabled implementing complex functions that improve the comport of the system’s occupant as well as their safety. A cyber physical system (CPS) is a system featuring a tight combination of, and coordination between, the system’s computational and physical elements. The concept of cyber physical system, including physical elements, cyber elements, and shared networks, has been introduced due to two general reasons: design flexibility and reliability. This paper presents a cyber physical system where system components are connected to a shared network, and control functions are divided into small tasks that are distributed over a number of embedded controllers with limited computing capacity. In order to demonstrate the effectiveness of cyber physical system, an unmanned forklift with autonomous obstacle avoidance ability is implemented and its performance is experimentally evaluated.
참고문헌 (15)
- P. Liggesmeyer, "Trends in embedded software engineering", IEEE Software, 26(3), pp.19~25 (2009)
- 이소진, "임베디드 시스템의 가상 ARM 머신의 개발", 대한임베디드공학회논문지, 3(1), pp.19~24 (2008), 대한임베디드공학회
- P. Martí, "Design of an embedded control system laboratory experiment", IEEE Transactions on Industrial Electronics, 57(10), pp.3297~3307 (2010)
- E. Madnick, "Performance analysis of multi-microprocessorsystems", IEEE Transactions on IndustrialElectronics, 34(3), pp.345~350 (1987)
- E.A. Lee, "Absolutely positively on time: what would it take?", Computer, 38(7), pp.85~87 (2005)
- E. Nasr, "A technique for managing complexity of use cases for large complex embedded systems", Proceedings on ISORC`02, pp.225~232 (2002)
- T. Furuyama, "Trends and challenges of large scale embedded memories", Proceedings of the IEEE 2004 Custom Integrated Circuits Conference, pp.449~456 (2004)
- E.A. Lee, "Cyber physical systems are computing foundation adequate?", Proceedings on NSF Workshop on Cyber Physical Systems (2006)
- M.Y. Chow, "Network-based control systems: a tutorial", Proceedings on IECON`01, 3, pp.1593~1602 (2001)
- 이경창, "Worst case communication delay of real-time industrial switched ethernet with multiple levels", IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 53(5), pp.1669~1676, IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC
- 양인석, "무인잠수정 제어시스템을 위한 네트워크 전송지연 및 패킷분실 보상기법", 대한임베디드공학회논문지, 6(3), pp.149~156 (2011), 대한임베디드공학회
- N. Correll, "Building a distributed robot garden", Proceedings on IROS`09, pp.1509~1516 (2009)
- K. Tindell, "Calculation controller area network (CAN)message response times", ControlEngineering Practice, 3(8), pp.1163~1169 (1995)
- CLARK Material Handling Asia, "CRX 10-25 User manual", CLARK Material Handling Asia, ~ (2006)
- 임준혁, "무인자동차의 경로점 주행 시 장애물 회피를 위한 경로생성 알고리즘", 제어.로봇.시스템학회 논문지, 17(8), pp.843~850 (2011), 제어·로봇·시스템학회