Ultra-Wide-Band (UWB) Band-Pass-Filter for Wireless Applications from Silicon Integrated Passive Device (IPD) Technology
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Currently, there is widespread adoption of silicon-based technologies for the implementation of radio frequency (RF) integrated passive devices (IPDs) because of their low-cost, small footprint and high performance. Also,the need for high speed data transmission and reception coupled with the ever increasing demand for mobility in consumer devices has generated a great interest in low cost devices with smaller form-factors. The UWB BPF makes use of lumped IPD technology on a silicon substrate CSMP (Chip Scale Module Package). In this paper, this filter shows 2.0 dB insertion loss and 15 dB return loss from 7.0 GHz to 9.0 GHz. To the best of our knowledge, the UWB band-pass-filter developed in this paper has the smallest size (1.4 mm×1.2 mm×0.40 mm) while achieving equivalent electrical performance.
Abstract
Currently, there is widespread adoption of silicon-based technologies for the implementation of radio frequency (RF) integrated passive devices (IPDs) because of their low-cost, small footprint and high performance. Also,the need for high speed data transmission and reception coupled with the ever increasing demand for mobility in consumer devices has generated a great interest in low cost devices with smaller form-factors. The UWB BPF makes use of lumped IPD technology on a silicon substrate CSMP (Chip Scale Module Package). In this paper, this filter shows 2.0 dB insertion loss and 15 dB return loss from 7.0 GHz to 9.0 GHz. To the best of our knowledge, the UWB band-pass-filter developed in this paper has the smallest size (1.4 mm×1.2 mm×0.40 mm) while achieving equivalent electrical performance.
참고문헌 (7)
- K. Liu, "Small Form-factor Integrated Passive Devices for SiP Applications", Proc. IEEE MTT-S International Microwave Symposium (2007), IEEE MTTS
- N. M. Nguyen, "Si IC-compatible Inductors and LC Passive Filters", IEEE J. Solid-State Circuits, 25(4), pp.1028~ (1990)
- J. N. Burghartz, "Microwave Inductors and Capacitors in Standard Multilevel Interconnect Silicon Technology", IEEE Trans. Microwave Theory Tech, 44(1) (1996)
- C. W. Tang, "LTCC-MLC Chip-type Balun Realized by LC Resonance Method", Electron. Lett, 38(11), pp.519~ (2002)
- C. Tang, "A Semi-lumped Balun Fabricated by Low Temperature Co-fired Ceramic", IEEE MTT-S Int. Microwave Symp. Dig, 통권 : 3, pp.2201~ (2002)
- K. Liu, "Band-pass-filter with Balun Function from IPD Technology", Proc. 59th Electronic Components Technology Conference (ECTC) (2008), IEEE Components, Packaging and Manufacturing Technology Society (CPMT)
- K. Liu, "Full-Circuit Design Optimization of a RF Silicon Integrated Passive Device", Proc. 2006 IEEE Electrial Performance of Electrical Packaging (2006), The IEEE Microwave Theory and Techniques Society