Effect of Glass Additions on the Adhesion and Electrical Conductivity of Photoimageable Silver Paste
3
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Anorthite forming glass frits in amounts up to 25 vol% of the silver powder were added to improve the adhesion between the conductor pattern formed by thick film photoimageable process and the low temperature co-fired ceramics (LTCC) substrate. The sheet resistance of the conductor pattern was raised from 0.13 mΩ/□ to 2.25mΩ/□ as the volume percentage of glass frit increased up to 25 vol%. The adhesion strength was improved with this glass frit increase, but it decreased when the glass content exceeded 20 vol% which are possibly attributed to the liquid pool effect and the reduced fracture toughness in the interface between conductor and LTCC layer. The shrinkage of the width of the conductor pattern decreased with the addition of glass contents.
Abstract
Anorthite forming glass frits in amounts up to 25 vol% of the silver powder were added to improve the adhesion between the conductor pattern formed by thick film photoimageable process and the low temperature co-fired ceramics (LTCC) substrate. The sheet resistance of the conductor pattern was raised from 0.13 mΩ/□ to 2.25mΩ/□ as the volume percentage of glass frit increased up to 25 vol%. The adhesion strength was improved with this glass frit increase, but it decreased when the glass content exceeded 20 vol% which are possibly attributed to the liquid pool effect and the reduced fracture toughness in the interface between conductor and LTCC layer. The shrinkage of the width of the conductor pattern decreased with the addition of glass contents.
참고문헌 (15)
- R. Tummala, "SOP: Microelectronic Systems Packaging Technology for the 21st Century", Advancing Microelectronics (1999)
- J. Muller, "Comparison of High Resolution Patterning Technologies for LTCC Microwave Circuits", Proc. IMAPS, 2007, pp.통권 : 99, ~[DOI]
- M. Skurski, "Photoimageable Silver Cofirable Conductor Compatible with 951 Green Tape", Int. J. Microcircuits and Electronic Packaging, 21(4), pp.355~ (1998)
- T. Masaki, "Pho-tosensitive Conductive Paste", Proc. IEMT, 1997, pp.통권 : 356, ~[DOI]
- Erick Kim, "A Study on the Development of Mllimeter-wave Band Pass Filter using the Photoimageable Thick Film Technology", Proc. J. Microelectron. Packag. Soc, 통권 : 87 (2002), IMAPS-Korea
- S. D. Park, "Formation of Fine Line and Series Gap Resonator using the Photoimageable Thick Film Technology", J. Microelectron. Packag. Soc, 8(3), pp.69~ (2001)
- T. Tick, "LTCC Integrated Air-filled Waveguides for G-band Applications", Microwave and Optical Technology Letters, 51(1), pp.176~ (2009)
- H. Yang, "Coprocessable Photoimageable Silver and Carbon Nanotube Compositions and Method for Field Emission Devices", US Patent, US 2009, 2009
- I. Wyzkiewicz, "Hybrid Microstructures for Capillary Electrophoresis with Micro-channel in Photosensitive Layer", Proc. SPIE, San Jose, (6937) (2007), The International Society for Optical Engineering
- G. G. Umarji, "Photoimageable Silver Paste for High Density Interconnection Technology", Mater. Lett, (59), pp.503~ (2005)
- S. A. Ketkar, "Lead-free Photoimageable Silver Conductor Formulation for High Density Electronic Packaging", Mat. Sci. Eng. B, (132), pp.215~ (2006)
- Seong-Dae Park, "Fabrication of Photoimageable Silver Paste for Low-Temperature Cofiring Using Acrylic Binder Polymers and Photosensitive Materials", Macromolecular Research, 12(4), pp.391~398 (2004), 한국고분자학회
- H. T. Kim, "Embedded Passives Fabricated on LTCC and Application of Photo-imageable Thick Film Technology", Proc. IMAPS, 2007, pp.(23), ~[DOI]
- M. E. Twentyman., "High Temperature Metallizing", J. Mater. Sci, (10), pp.765~ (1975)
- 김호기, "Effect of Oxide Glass on the Sintering Behavior and Electrical Properties in Ag Thick Films", IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, 11(2), pp.195~