물질이동 억제 버퍼층 형성을 통한 페로브스카이트 태양전지 장기 안정성 확보
Long-term Stability of Perovskite Solar Cells with Inhibiting Mass Transport with Buffer Layers
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
페로브스카이트 태양전지는 용액공정으로 제작되어 공정 중 전구체 조성제어를 통해 밴드갭을 용이하게 조절할 수 있다. 탠덤 태양전지의 상부셀로 활용하여 실리콘 태양전지와 접합 시 30% 이상의 효율 달성이 가능하지만, 페로브스카이트 태양전지의 낮은 안정성이 상용화의 걸림돌로 작용하고 있다. 아이오딘 이온 및 전극 물질 확산이 주된 열화기구로 알려져 있어 장기 안정성을 확보하기 위해서는 이러한 이온 이동의 방지가 필요하다. 본 연구에서는 층간소재와페로브스카이트 광활성층 사이의 이온이동에 의한 열화현상을 관찰하고, 이를 억제하기 위해 페로브스카이트 소재와 은전극 사이에 버퍼층을 도입하여 소자의 안정성을 확보하였다. 85oC에서 300시간 이상 보관 시 버퍼가 없는 소자는 페로브스카이트 층이 PbI2 및 델타상으로 변화하며 변색되었으며 AgI가 형성되는 것을 확인했다. LiF와 SnO2 버퍼 도입 시이온이동 억제 효과를 통해 페로브스카이트 태양전지의 열안정성이 향상되었다. LiF버퍼층 적용 및 봉지를 한 소자는85oC-85%RH damp heat 시험 200시간 후 효율감소가 발생하지 않았으며 추가로 AM 1.5G-1SUN 하에서 최대출력점을추적하였을 때 200시간 후 초기 효율의 90% 이상 유지하는 것을 확인했다. 이 결과는 버퍼층 형성을 통한 층간 물질이동 억제가 장기안정성을 확보하기 위한 필요조건임을 보여준다.
Abstract
Perovskite solar cells (PSCs) can be fabricated through solution process economically with variable bandgap that is controlled by composition of precursor solution. Tandem cells in which PSCs combined with silicon solar cells have potential to reach high power conversion efficiency over 30%, however, lack of long-term stability of PSCs is an obstacle to commercialization. Degradation of PSCs is mainly attributed to the mass transport of halide and metal electrode materials. In order to ensure the long-term stability, the mass transport should be inhibited. In this study, we confirmed degradation behaviors due to the mass transport in PSCs and designed buffer layers with LiF and/or SnO2 to improve the long-term stability by suppressing the mass transport. Under high-temperature storage test at 85oC, PSCs without the buffer layers were degraded by forming PbI2, AgI, and the delta phase of the perovskite material, while PSCs with the buffer layers showed improved stability with keeping the original phase of the perovskite. When the LiF buffer and encapsulation were applied to PSCs, superior long-term stability on 85oC-85% RH dump heat test was achieved; efficiency drop was not observed after 200 h. It was also confirmed that 90.6% of the initial efficiency was maintained after 200 hours of maximum power tracking test under AM 1.5G-1SUN illumination. Here, we have demonstrated that the buffer layer is essential to achieve long-term stability of PSCs.
참고문헌 (34)
- Y. Hou, "Efficient tandem solar cells with solution-processed perovskite on textured crystalline silicon", Science, 367, pp.1135~1140 (2020)
- M. Jošt, "Monolithic Perovskite Tandem Solar Cells: A Review of the Present Status and Advanced Characterization Methods Toward 30%Efficiency", Advanced. Energy Materials, 10, pp.1~43 (2020)
- J. Xu, "Triplehalide wide-band gap perovskites with suppressed phase segregation for efficient tandems", Science, 367, pp.1097~1104 (2020)
- D. H. Kim, "Efficient, stable silicon tandem cells enabled by anion-engineered widebandgap perovskites", Science, 368, pp.155~160 (2020)
- J. B. You, "Improved air stability of perovskite solar cells via solution-processed metal oxide transport layers", Nature nanotechnology, 11, pp.75~81 (2016)
- M. T. Kam, "Room-temperature sputtered SnO2 as robust electron transport layer for air-stable and efficient perovskite solar cells on rigid and flexible substrates", Scientific reports, 9(6963), pp.1~10 (2019)
- T. Bu, "Lead halide-templated crystallization of methylamine-free perovskite for efficient photovoltaic modules", Science, 372, pp.1327~1332 (2021)
- A. A. Ashouri, "Monolithic perovskite", silicon tandem solar cell with >29% efficiency by enhanced hole extraction, 2020, pp.370, 1300~1309
- M. M. Lee, "Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites", Science, 338, pp.643~647 (2012)
- D. Bryant, "Light and oxygen induced degradation limits the operational stability of methylammonium lead triiodide perovskite solar cells", Energy&Environmental Science, 9, pp.1655~1660 (2016)
- G. Y. Kim, "Large tunable photoeffect on ion conduction in halide perovskites and implications for photodecomposition", Nature materials, 17, pp.445~449 (2018)
- S. Yang, "Stabilizing halide perovskite surfaces for solar cell operation with wide-bandgap lead oxysalts", Science, 365, pp.473~478 (2019)
- J. Liu, "Identification and Mitigation of a Critical Interfacial Instability in Perovskite Solar Cells Employing Copper Thiocyanate Hole-Transporter", Advanced Material Interfaces, 3, pp.1~9 (2016)
- X. Li, "Chemical anti-corrosion strategy for stable inverted perovskite solar cells", Science Advances, 6(51), pp.2~10 (2020)
- I. Hwang, "Enhancing Stability of Perovskite Solar Cells to Moisture by the Facile Hydrophobic Passivation", ACS Appled Materials&Interfaces, 7, pp.17330~17336 (2015)
- H. Tan, "Efficient and stable solution-processed planar perovskite solar cells via contact passivation", Science, 355, pp.722~726 (2017)
- C. C. Boyd, "Barrier Design to Prevent Metal-Induced Degradation and Improve Thermal Stability in Perovskite Solar Cells", ACS Energy Letters, 3, pp.1772~1778 (2018)
- M. Mohammadi, "Effects of the location and size of plasmonic nanoparticles(Ag and Au)in improving the optical absorption and efficiency of perovskite solar cells", Journal of Alloys and Compounds, 877, pp.1601771~1601716 (2021)
- P. L. Qin, "High-Performance Rigid and Flexible Perovskite Solar Cells with Low-Temperature Solution-Processable Binary Metal Oxide Hole-Transporting Materials", Solar. RRL, 1, pp.1~10 (2017)
- W. S. Yang, "Iodide management in formamidinium-lead-halidebased perovskite layers for efficient solar cells", Science, 356, pp.1376~1379 (2017)
- M. Thambidurai, "Highly efficient and stable planar perovskite solar cells by solution-processed tin oxide", Journal of Power Sources, 9, pp.3128~3313 (2016)
- S. You, "A Biopolymer Heparin Sodium Interlayer Anchoring TiO2 and MAPbI3 Enhances Trap Passivation and Device Stability in Perovskite Solar Cells", Advanced. Materials, 30, pp.1~8 (2018)
- 박소정, "고신뢰성 페로브스카이트 태양전지용 무기물 기반 전하전달층", 세라미스트, 23(2), pp.145~165 (2020), 한국세라믹학회[DOI]
- J. Wang, "Insights into Fullerene Passivation of SnO2 Electron Transport Layers in Perovskite Solar Cells", Advanced Functional Materials, 29, pp.1~12 (2019)
- J. P. C. Baena, "Promises and challenges of perovskite solar cells", Science, 358, pp.739~744 (2017)
- D. P. McMeekin, "A mixedcation lead mixed-halide perovskite absorber for tandem solar cells", Science, 351, pp.151~155 (2016)
- S. N. Habisreutinger, "Carbon nanotube", polymer composites as a highly stable hole collection layer in perovskite solar cells, 2014, pp.14, 5561~5568
- I. J Zhao, "Strained hybrid perovskite thin films and their impact on the intrinsic stability of perovskite solar cells", Science advances, 3, pp.1~8 (2017)
- S. J. Lee, "Fabrication of Efficient Formamidinium Tin Iodide Perovskite Solar Cells through SnF2-Pyrazine Complex", Journal of the American Chemocal Society, 138, pp.3974~3977 (2016)
- K. O. Brinkmann, "Suppressed decomposition of organometal halide perovskites by impermeable electron-extraction layers in inverted solar cells", Nature Communication, 8, pp.1~9 (2017)
- X. Liu, "5-nm LiF as an Efficient Cathode Buffer Layer in Polymer Solar Cells Through Simply Introducing a C60 Interlayer", Nanoscale Research Letters, 12, pp.1~7 (2017)
- G. E. Eperon, "Perovskite-perovskite tandem photovoltaics with optimized band gaps", Science, 354, pp.861~865 (2016)
- K. A. Bush, "23.6%-Efficient Monolithic Perovskite", Silicon Tandem Solar Cells With Improved Stability, 2017, pp.2, 1~17
- S. J. Lee, "할로겐화물 페로브스카이트 태양전지", 공업화학전망, 20, pp.59~76 (2017)