본문 바로가기
KERD
논문KCI 등재

LTCC 기반 ME Dipole 안테나 구조를 활용한 Χ-Band 용 8 × 4 이중편파 배열안테나에 관한 연구

A Study on 8  4 Dual-Polarized Array Antenna for Χ-Band Using LTCC-Based ME Dipole Antenna Structure

1

조회

0

다운로드

3

인용

0

참고문헌

키워드

주제분류재료공학

초록

본 논문에서는 X-Band 대역에서 이중 편파 특성을 갖는 Magneto-Electric(ME) dipole 배열안테나를 제안하고, 이를 Low Temperature Co-fired Ceramic (LTCC) 공정을 이용하여 구현 및 측정하였다. 제안된 배열안테나는 LTCC 로 구성된 1  1 ME dipole 안테나 32 개를 Teflon PCB에 배열하여 8  4 배열 안테나로 구성된다. 1  1 ME dipole 안테나는 두 쌍의 방사체에서 각각 수직 편파와 수평 편파를 방사하여 이중 편파를 구현하게 된다. 2개의 Port 급전은 LTCC 를 이용한 적층 공정을 통해 구현하였으며, 각 각의 Port는 포트 간 격리도를 확보하기 위해 -shaped feeding strip을 통해 독립적으로 방사체에 급전된다. 안테나 배열에 사용된 Teflon PCB는 4층 구조로 형성하였으며, 상단 면과 하단 면을통해 2개의 Port가 급전된다. 그리고 배열되는 안테나와 Teflon PCB의 임피던스 정합을 위해 Teflon PCB의 전송선로에g/4 변환기를 적용하였으며 시뮬레이션을 통해 최적 파라미터를 얻었다. 구현된 ME dipole 8  4 배열안테나의 크기는15.5 mm  11 mm  4.2 mm이며, Port 1 급전 시 측정된 방사 최대 이득은 18.2 dBi, cross-pol은 1.0 dBi이고 Port 2 급전 시 측정된 방사 최대 이득은 18.1 dBi, Cross-pol은 3 .2 dBi로 확인하였다.

Abstract

In this paper, the Magneto-Electric(ME) dipole array antenna with dual-polarization in the X-Band is proposed and it is implemented and measured. The proposed array antenna is composed of 32 single ME dipole antenna and a Teflon PCB. 1  1 ME dipole antenna is implemented dual-polarization by radiating vertical polarization and horizontal polarization from two pairs of radiators. 2-port feeding structures are realized by lamination process using LTCC. And, each port independently feeds the radiator through a -shaped feeding strip with isolation between ports. The Teflon PCB used in the antenna array has a 4-layer structure, and 2-port is fed through the top and bottom layers. The g/4 transformer is applied to the transmission line of the Teflon PCB for impedance matching of the arrayed antenna and the Teflon PCB, and the optimal parameters are obtained through simulation. The measured maximum antenna gains of port 1 was 18.2 dBi, Cross-pol was 1.0 dBi. And the measured maximum antenna gains of port 1 was 18.1 dBi, Cross-pol was 3.2 dBi.

참고문헌 (10)

  1. J. Chen, "A Dual-Band Dual-Polarization Slot Patch Antenna for GPS and Wi-Fi Applications", IEEE Antennas and Wireless Propagation Letters, 15, pp.406~ (2016)
  2. 윤현상, "광대역 고격리도 이중편파 마이크로스트립 패치 안테나 설계", 한국전자파학회 논문지, 31(5), pp.414~420 (2020), 한국전자파학회[DOI]
  3. V. R. Anreddy, "Capacity of measured ricean and rayleigh indoor MIMO channels at 2. 4 GHz with polarization and spatial diversity", IEEE Wireless Communications and Networking Conference, pp.946~951 (2006)
  4. 김재길, "무선 통신을 위한 이중 편파 시스템 구조", 한국통신학회논문지C, 39(8), pp.746~755 (2014), 한국통신학회
  5. Y. Gou, "A compact dual-polarized double E-shaped patch antenna with high isolation", IEEE Transactions on Antennas and Propagation, 61(8), pp.4349~ (2013)
  6. W. Li, "Dual-polarized H-shaped printed slot antenna", IEEE Antennas and Wireless Propagation Letters, 16, pp.1484~ (2016)
  7. 유종인, "그라운드 모드의 공진을 이용한 광대역 격리도를 가지는 스마트안경용 소형 MIMO 안테나", 한국전자파학회 논문지, 29(10), pp.817~820 (2018), 한국전자파학회[DOI]
  8. S. D. Park, "LTCC and LTCC-M Technologies for Multichip Module", J. Microelectron. Packag. Soc., 6(3), pp.25~ (1999)
  9. 이지희, "고압 스프레이 코팅법에 의한 저온동시소성세라믹(LTCC) 유전체 층의 적층방법", 마이크로전자 및 패키징학회지, 13(3), pp.33~38 (2006), 한국마이크로전자및패키징학회
  10. 이지연, "24 GHz 대역을 위한 LTCC 기판 적용된 수동소자 구현", 마이크로전자 및 패키징학회지, 28(2), pp.81~88 (2021), 한국마이크로전자및패키징학회

관련 논문AI추천

이 간행물의 다른 논문 (4건)