GDI 602/Rubrene을 이용한 황색 OLED의 제작과 특성 분석
Fabrication and Characterization of Yellow OLED using GDI602:Rubrene(10%) Material
0
조회
0
다운로드
2
인용
0
참고문헌
초록
GDI602:Rubrene(10%) 형광 시스템을 이용하여 황색 발광 OLED를 제작하고 그 특성을 평가하였다. 소자 제작에서 ITO/glass 위에 정공 주입층으로 2-TNATA[4,4’,4"-tris(2-naphthylphenyl-phenylamino) -triphenylamine]를, 정공 수송층으로 NPB[N,N’-bis(1-naphthyl)-N,N’-diphenyl-1,1’-biphenyl-4,4-diamine]를 진공 증착하였다. 황색 발광층으로는 GDI602를 호스트로, Rubrene를 도펀트로 사용하였다. 또한, 전자 수송층으로는 Alq3를, 전자 주입층으로는 LiF를 사용하여 ITO/2-TNATA/NPB/GDI602:Rubrene(10%)/Alq3/ LiF/Al 구조의 저분자 OLED를 제작하였다. 본 실험에서 제작된 황색 OLED는 562nm의 중심 발광 파장을 가지며, CIE(0.50, 0.49)의 색순도, 그리고 10V의 동작전압에서 2300 Cd/m2의 휘도와 0.7 lm/W의 전력 효율을 나타내었다.
Abstract
The yellow emitting OLED using GDI602:Rubrene(10%) material has been fabricated and characterized. In the device fabrication, 2-TNATA[4,4',4"-tris(2-naphthylphenyl-phenylamino)-triphenyl- amine] as a hole injection material and NPB[N,N'-bis(1-naphthyl)-N,N'-diphenyl-1,1'-biphenyl -4,4'- diamine] as a hole transport material were deposited on the ITO(indium thin oxide)/glass substrate by vacuum evaporation. And then, yellow emission material was deposited using GDI602 as a host material and Rubrene(10%) as a dopant. Finally, small molecular OLED with the structure of ITO/2- TNATA/NPB/GDI602:Rubrene(10%)/Alq/LiF/Al was obtained by in-situ successive deposition of Alq, LiF and Al as the electron transport material, electron injection material and cathode. The yellow OLED fabricated in our experiments showed the color coordinate of CIE(0.50, 0.49), the luminance of 2300 Cd/m and the power efficiency of 0.7 lm/W at 10 V with the peak emission wavelength of 562 nm.
참고문헌 (14)
- "OLED 소자의 광학특성 향상 기술", 5(4), pp.13~ (2004)
- "저분자 OLED 소자기술", 7(1), pp.4~ (2006)
- "White light emission from exciplex using tris- aluminum as chromaticity-tuning layer", 78(25), pp.3947~ (2001)
- "Bright white organic light-emitting diode", 79(25), pp.4234~4236 (2001)
- "백색 OLED", pp.25~29 (2005)
- "백색 유기발광소자와 최근 개발 동향", (9) (2006)
- "The electrical and optical properties of polymer light emitting diode with ITO", PEDOT PSS, Al structure at various concentration of MEH-PPV, 2005[DOI]
- "Handbook of Luminescence", 1(90) (2003), American Scientific publishers
- "OLED Interface 기술", 7(1), pp.4~ (2006)
- "White OLED Structures Optimized for RGB and RGBW Formats", 816 (2004)
- "Development of OLED with high stability and luminance efficiency by co-doping methods for full color displays", 10(1), pp.30~ (2004)
- "유기EL 소자 제작공정", 2(27) (2001), 한국진공연구조합
- "정보디스플레이공학", 155 (2005), 청문각
- "유기전자공학", 318 (2006), 청문각