본문 바로가기
KERD
논문KCI 등재

저융점 Sn-Bi 솔더의 신뢰성 개선 연구

Improvement of Reliability of Low-melting Temperature Sn-Bi Solder

김현태|윤정원|정민성
한국마이크로전자및패키징학회 (The Microelectronics And Packaging Society)|2022.06|마이크로전자 및 패키징학회지 (Jornal of the Microelectronics and Packaging Society)|제29권 제2호|pp. 1-10|DOI https://dx.doi.org/10.6117/kmeps.2022.29.2.001

2

조회

0

다운로드

1

인용

0

참고문헌

키워드

Mechanical propertiesIntermetallic compoundSn-58Bi solderLow-melting temperatureFlexible substrates
주제분류재료공학

초록

최근 반도체 소자는 모바일 전자제품과 wearable 및 flexible한 소자와 기판의 다양한 활용으로 많은 분야에서폭넓게 사용되고 있다. 이들 반도체 칩 접합 공정 중 기판과 솔더의 열팽창 계수(CTE)의 차이와 기판 및 부품 전체에 인가되는 과도한 열 영향은 소자의 성능 및 신뢰성에 영향을 주며, 최종적으로 휨(warpage) 현상 및 장기 신뢰성 저하 등을초래한다. 이러한 문제점을 개선하기 위해 저온에서 공정이 가능한 저융점 솔더에 대한 연구가 활발히 진행되고 있다. Sn-Bi, Sn-In 등 다양한 저융점 솔더 합금 중 Sn-Bi 솔더는 높은 항복 강도, 적절한 기계적 특성 및 저렴한 가격 등의 이점이 있어 유망한 저온 솔더로 각광받고 있다. 그러나 Bi의 높은 취성 특성 등 단점으로 인해 솔더 합금의 개선이 필요하다. 본 review 논문에서는 다양한 미량 원소와 입자를 첨가하여 Sn-Bi 소재의 기계적 특성 개선을 위한 연구 동향을 소개하며 이를 비교 분석하였다.

Abstract

Recently, semiconductor devices have been used in many fields owing to various applications of mobile electronics, wearable and flexible devices and substrates. During the semiconductor chip bonding process, the mismatch of coefficient o f thermal expansion (CTE) between the substrate and the solder, and the excessive heat applied to the entire substrate and components affect the performance and reliability of the device. These problems can cause warpage and deterioration of long-term reliability of the electronic packages. In order to improve these issues, many studies on low-melting temperature solders, which is capable of performing a low-temperature process, have been actively conducted. Among the various low-melting temperature solders, such as Sn-Bi and Sn-In, Sn-58Bi solder is attracting attention as a promising low-temperature solder because of its advantages such as high yield strength, moderate mechanical property, and low cost. However, due to the high brittleness of Bi, improvement of the Sn-Bi solder is needed. In this review paper, recent research trends to improve the mechanical properties of Sn-Bi solder by adding trace elements or particles were introduced and compared.

참고문헌 (53)

  1. F. Wang, "Improvement on interfacial structure and properties of Sn-58Bi", Cu joint using Sn-3.0Ag-0.5Cu solder as barrier, 2017, pp.28(24), 19051~19060
  2. K. Suganuma, "Advances in lead-free electronics soldering", Curr. Opin. Solid State Mater. Sci, 5(1), pp.55~64 (2001)
  3. H. Ma, "A review of mechanical properties of lead-free solders for electronic packaging", J. Mater. Sci, 44(5), pp.1141~1158 (2009)
  4. C. Zhang, "Effect of Sb content on properties of Sn-Bi solders", Trans. Nonferrous Met. Soc. China, 24(1), pp.184~191 (2014)
  5. O. Mokhtari, "Effects of In and Ni addition on microstructure of Sn-58Bi solder joint", J. Electron. Mater., 43(11), pp.4158~4170 (2014)
  6. R. S. Sidhu, "Impact of processing conditions and solder materials on surface mount assembly defects", JOM, 63(10), pp.47~51 (2011)
  7. Z. Zhao, "Effects of package warpage on head-in-pillow defect", Mater. Trans., 56(7), pp.1037~1042 (2015)
  8. Z. Zhu, "Failure mechanisms of solder interconnects under current stressing in advanced electronic packages: An update on the effect of alternating current (AC)stressing", Microelectron. Reliab, 91, pp.179~182 (2018)
  9. K. N. Tu, "Effect of Joule heating and current crowding on electromigration in mobile technology", Appl. Phys. Rev, 4(1), pp.011101~ (2017)
  10. D. Xie, "Head in pillow (HIP) and yield study on SIP and PoP assembly", Proc. 2009 59th IEEE Electronic Components and Technology Conference (ECTC), pp.752~ (2009), IEEE Components, Packaging and Manufacturing Technology Society (CPMT)
  11. L. T. Chen, "Electromigration study in the eutectic SnBi solder joint on the Ni", Au metallization, 2006, pp.21(4), 962~969
  12. H. W. Miao, "Thermal cycling test in Sn-Bi and Sn-Bi-Cu solder joints", J. Mater. Sci. : Mater. Electron, 11(8), pp.609~618 (2000)
  13. F. Wang, "Recent progress on the development of Sn-Bi based low-temperature Pb-free solders", J. Mater. Sci. : Mater. Electron, 30(4), pp.3222~3243 (2019)
  14. 이재언, "내산화성 개선 Sn-Zn계 저온용 무연솔더 개발", 대한용접접합학회지, 29(5), pp.514~521 (2011), 대한용접접합학회
  15. R. Raj, "Development and characterization of eutectic Sn-Zn, Sn-Ag, Sn-Bi and Sn-Cu solder alloys", J. Mater. Res, 110(12), pp.1150~1159 (2019)
  16. L. Pu, "Undercooling and microstructure analysis for the design of low melting point solder", Proc. 2021 5th IEEE Electron Devices Technology & Manufacturing Conference (EDTM), pp.1~ (2021), IEEE Electronic Devices Society (EDS)
  17. S. Cheng, "A review of lead free solders for electronics applications", Microelectron. Reliab, 75, pp.77~95 (2017)
  18. Jae-Hyeong Park, "Low-Temperature Bonding of PZT (PbZrTiO3) and Flexible Printed Circuits Using Sn52In Solder Anisotropic Conductive Films for Flexible Ultrasonic Transducers", IEEE Transactions on Components, Packaging and Manufacturing Technology, 9(11), pp.2152~2159 (2019), Institute of Electrical and Electronics Engineers (IEEE)[DOI]
  19. W. R. Osório, "Microstructure and mechanical properties of Sn-Bi, Sn-Ag and Sn-Zn lead-free solder alloys", J. Alloys Compd., 572, pp.97~106 (2013)
  20. S. Liu, "Electromigration behavior of Cu", Sn-58Bi-1Ag, J. Mater. Sci.:Mater. Electron., pp.2020, 31(15)[DOI]
  21. Z. Mei, "Characterization of eutectic SnBi solder joints", J. Electron. Mater, 21(6), pp.599~607 (1992)
  22. S. Liu, "Effects of Ag on the microstructure and shear strength of rapidly solidified Sn-58Bi solder", J. Mater. Sci.: Mater. Electron., 30(7), pp.6701~6707 (2019)
  23. H. E. Peng, "Improvement of mechanical properties of Sn-58Bi alloy with multi-walled carbon nanotubes", Trans. Nonferrous Met. Soc. China, 22, pp.692~696 (2012)
  24. L. Yang, "Effects of Ni addition on mechanical properties of Sn58Bi solder alloy during solid-state aging", Mater. Sci. Eng. A, 667, pp.368~375 (2016)
  25. Y. Wei, "Effects of endogenous Al and Zn phases on mechanical properties of Sn58Bi eutectic alloy", Mater. Charact., 175, pp.111089~ (2021)
  26. D. P. Jiang, "Effect of minor Ag and Cu additions on melting characteristics, wettability and microstructures of Sn58Bi solder", Proc. 2017 18th International Conference on Electronic Packaging Technology (ICEPT), pp.1098~ (2017), IEEE Components, Packaging and Manufacturing Technology Society (CPMT)
  27. C. J. Lee, "Mechanical properties of Sn-58wt% Bi solder containing Ag-decorated MWCNT with thermal aging tests", J. Alloys Compd, 820, pp.153077~ (2020)
  28. X. Liu, "Effect of Y2O3 particles on microstructure formation and shear properties of Sn-58Bi solder", J. Mater. Sci.: Mater. Electron, 21(10), pp.1046~1054 (2010)
  29. R. M. Shalaby, "Effect of silver and indium addition on mechanical properties and indentation creep behavior of rapidly solidified Bi-Sn based lead-free solder alloys", Mater. Sci. Eng. A, 560, pp.86~95 (2013)
  30. 강혜준, "최근 SnBi계 저온 솔더 합금 및 접합 특성", 대한용접접합학회지, 38(6), pp.576~583 (2020), 대한용접접합학회[DOI]
  31. Y. Maruya, "Bonding characteristics of Sn-57Bi-1Ag low temperature lead-free solder to gold-plated copper", Procedia Eng, 184, pp.223~230 (2017)
  32. M. Mccormack, "Significantly Improved Mechanical Properties of Bi- Sn Solder Alloys by Ag- Doping", Journal of Electronic Materials, 26(8), pp.954~958 (1997), Springer Science and Business Media LLC[DOI]
  33. Z. Wang, "Influences of Ag and In alloying on Sn- Bi eutectic solder and SnBi", Cu solder joints, 2019, pp.30(20), 18524~18538
  34. W. Dong, "Effects of trace amounts of rare earth additions on microstructure and properties of Sn-Bi-based solder alloy", J. Electron. Mater., 37(7), pp.982~991 (2008)
  35. M. Li, "Microstructure and mechanical properties of Sn-58Bi eutectic alloy with Cu", P addition, 2020, pp.7(11), 116502~
  36. Q. S. Zhu, "Effect of Zn addition on microstructure of Sn-Bi joint", Proc. 2009 International Conference on Electronic Packaging Technology & High Density Packaging (ICEPTHDP), pp.1043~ (2009), IEEE Components, Packaging and Manufacturing Technology Society (CPMT)
  37. S. Zhou, "Effects of Ti addition on the microstructure, mechanical properties and electrical resistivity of eutectic Sn58Bi alloy", Mater. Sci. Eng. A, 744, pp.560~569 (2019)
  38. A. T. Tan, "Influence of nanoparticle addition on the formation and growth of intermetallic compounds (IMCs) in Cu", Sn-Ag-Cu, Sci. Technol. Adv. Mater., pp.2015[DOI]
  39. L. Yang, "Influence of BaTiO3 nanoparticle addition on microstructure and mechanical properties of Sn-58Bi solder", J. Electron. Mater., 44(7), pp.2473~2478 (2015)
  40. N. Hansen, "Hall-Petch relation and boundary strengthening", Scr. Mater., 51(8), pp.801~806 (2004)
  41. S. Tikale, "Bond shear strength of Al2O3 nanoparticles reinforced 2220-capacitor", SAC305 solder interconnects reflowed on bare and Ni-coated copper substrate, 2021, pp.32(3), 2865~2886
  42. N. Jiang, "Influences of doping Ti nanoparticles on microstructure and properties of Sn58Bi solder", J. Mater. Sci.: Mater. Electron, 30(19), pp.17583~17590 (2019)
  43. A. Singh, "Effect Of 3% Molybdenum (Mo) Nanoparticles on The Melting, Microstructure and Hardness Properties of As-Reflowed Low Mass Sn-58Bi (SB) Solder Alloy", J. Adv. Res. Fluid Mech. Therm. Sci, 77(1), pp.69~87 (2021)
  44. 김병우, "Ru Nanoparticle이 첨가된 Sn-58Bi 솔더의 기계적 신뢰성 및 계면반응에 관한 연구", 마이크로전자 및 패키징학회지, 28(2), pp.95~103 (2021), 한국마이크로전자및패키징학회
  45. Y. Li, "Effect of silver (Ag) nanoparticle size on the microstructure and mechanical properties of Sn58BiAg composite solders", J. Alloys Compd., 645, pp.566~576 (2015)
  46. T. Nishizawa, "Examination of the Znenr relationship between grain size and particle dispersion", Mater. Trans. JIM, 38(11), pp.950~956 (1997)
  47. X. Li, "Effects of nanoscale Cu6Sn5 particles addition on microstructure and properties of SnBi solder alloys", Mater. Sci. Eng. A, 684, pp.328~334 (2017)
  48. L. Shen, "Elastic modulus, hardness and creep performance of SnBi alloys using nanoindentation", Mater. Sci. Eng. A, 558, pp.253~258 (2012)
  49. D. Grivas, "Deformation of Pb Sn eutectic alloys at relatively high strain rates", Acta Metall, 27(5), pp.731~737 (1979)
  50. L. Yang, "Effect of nanosized graphite on properties of Sn-Bi solder", J. Mater. Sci.: Mater. Electron., 24(11), pp.4180~4185 (2013)
  51. L. Yang, "Improved microstructure and mechanical properties for Sn58Bi solder alloy by addition of Ni-coated carbon nanotubes", Mater. Sci. Eng. A, 642, pp.7~15 (2015)
  52. S. Amares, "Experimental Study on the Melting Temperature, Microstructural and Improved Mechanical Properties of Sn58Bi", Cu Solder Alloy Reinforced with 1%, 2% and 3% Zirconia (ZrO2) Nanoparticles, 2021, pp.66, 407~418
  53. W. Zhu, "Effects of Al2O3nanoparticles on the microstructure and properties of Sn58Bi solder alloys", J. Mater. Sci.: Mater. Electron, 29(9), pp.7575~7585 (2018)

관련 논문AI추천

3D 반도체 패키징 적용을 위한 Sn-58wt%Bi 솔더의 취성 개선 전략 리뷰김병준, 김종웅, 박민규, 박연수한국마이크로전자및패키징학회 · 마이크로전자 및 패키징학회지2024 · 제31권 제4호솔더 합금 종류 및 솔더 조인트의 신뢰성 평가 기법김유권, 김태완, 김학성, 김헌수한국마이크로전자및패키징학회 · 마이크로전자 및 패키징학회지2023 · 제30권 제1호Tin Pest 방지 솔더합금의 크리프 특성유진, 김성범, 손윤철한국마이크로전자및패키징학회 · 마이크로전자 및 패키징학회지2005 · 제12권 제1호반도체 패키지 저온 솔더링을 위한 Sn-Bi/Sn-Ag-Cu 하이브리드 접합부 기계적 특성 개선 연구김현태, 윤정원, 임관수한국마이크로전자및패키징학회 · 마이크로전자 및 패키징학회지2025 · 제32권 제1호리플로우 솔더링 공정 조건에 따른 Sn-Bi-Ag와 Sn-Ag-Cu 복합 무연 솔더 접합부 특성 연구고용호, 김동진, 김자현, 박영배, 천경영한국마이크로전자및패키징학회 · 마이크로전자 및 패키징학회지2022 · 제29권 제3호OSP 표면처리된 FR-4 PCB기판과 Sn58%Bi 복합솔더 접합부의 미세조직 및 접합강도에 미치는 Sn-MWCNT의 영향민경득, 박현준, 이충재, 정승부한국마이크로전자및패키징학회 · 마이크로전자 및 패키징학회지2019 · 제26권 제4호

이 간행물의 다른 논문 (15건)

갈륨 및 갈륨 합금을 이용한 저온접합 기술 동향손윤철, 심호률, 홍태영pp. 11-18전자소자 열분석을 위한 열반사 현미경 기술김현범, 이승환, 장혜진pp. 19-31플렉시블 전자소자의 유연전도성 접합 기술이승민, 강승균, 이우진pp. 33-41고온/고습 조건이 스크린 프린팅 Ag와 Polyimide의 필 강도에 미치는 영향배병현, 박영배, 김가희, 이현철, 손기락pp. 43-48Flip Chip PKG 신뢰성 향상을 위한 Flux Immunity 개선 MUF 구현 방안 연구김성수, 이현숙, 김민석, 이준신, 문기일pp. 49-52
원문 보기