반도체 패키지 기판용 Ni-less 표면처리 기술 개발동향

키워드

참고문헌 (20)

1. D. Cullen, "Effects of Surface Finish on High Frequency signal loss using Various Substrate Materials" (2000), MacDermid, Inc
2. Y. Tomita, "Advanced surface plating on the organic FCBGA package", IEEE ECTC 2000, 2000, pp.861~867 (2000)
3. C. E. Ho, "Development and Evaluation of Direct Deposition of Au, Pd(P)Bilayers over Cu Pads in Soldering Applications", J. Electronic Materials, 41(12), pp.3276~3283 (2012)
4. Y. G. Jung, "Development of Large Die Fine Pitch Flip Chip BGA using TCNCP Technology", in IEEE, (2012), pp.439~443 (2012)
5. M. J. Lee, "Packaging Technology and Design Challenges for Fine Pitch Cu Pillar and BOT(Bond on Trace)using Thermal Compression Bonding", 36th International Electronic Manufacturing Technology Conference, pp.15216609~ (2014)
6. A. Gross, "Nickel free final finishes in the electronics industry", in IMAPS, 2015, ~
7. K. Shah, "Reliable Nickel-Free Surface Finish Solution for High-Frequency, HDI PCB Applications", J. Microelectron. Electron. Packag, 17(4), pp.121~127 (2020)
8. A. Gross, "Nickel-Free Final Finishes in the Electronics Industry", European Microelectronics Packaging Conference(EMPC), pp.1~4 (2015)
9. D. Baudrand, "Electroless Plating Processes : Developing Technologies for Electroless Nickel, Palladium and Gold", Metal Finishing, 93(9), pp.55~57 (1995)
10. H. O. Ali, "A Review of Electroless Gold Deposition Processes", Gold Bulletin, 17, pp.118~127 (1984)
11. Y. Okinaka, "An Electrochemical Study of Electroless Gold-Deposition Reaction", J. Electrochem. Soc, 120(6), pp.739~ (1973)
12. Y. Tao, "Revisiting the Effect of Nickel Characteristics on High-Speed Interconnect Performance", IEEE Transactions on Microwave Theory and Techniques, 64(8), pp.2447~2453 (2016)
13. 허진영, "미세피치 플립칩 패키지 구현을 위한 EPIG 표면처리에서의 무전해 팔라듐 피막특성 및 확산에 관한 연구", 한국표면공학회지, 50(3), pp.170~176 (2017), 한국표면공학회[DOI]
14. B. Rautio, "An Efficient EM Simulation Model for ENIG Plated Metal Finishes Including Conductor Side-Wall Plating Verified With Physical Measurement from 1 to 50 GHz", 2018 IEEE MTT-S International Microwave Workshop Series on 5G Hardware and System Technologies (IMWS-5G), pp.18149259~ (2018)
15. P. Seiler, "Measurement of PCB Surface Finishes for Substrate Characterization up to 67 GHz", 2018IEEE International Symposium on Antennas and Propagation & USNC, 2018, 18403070~
16. Y. H. Huang, "Reaction of Au, Pd, Cu and Au, Pd, Au, Cu multilayers with Sn Ag Cu alloy", Surface & Coatings Technology, 358, pp.753~761 (2019)
17. A. Ippich, "PCB Surface Finish Impact to Losses at High Frequencies", IEEE International Conference on Microwaves, Antennas, Communications and Electronic Systems(COMCAS), pp.19279817~ (2019)
18. I. Y. -E. Su, "The investigation of the correlation between Electroless Nickel Immersion Gold and High-speed Signal Transmission", 202015th International Microsystems, Packaging, Assembly and Circuits Technology Conference(IMPACT), pp.20237805~ (2020)
19. S. -Y. Jun, "Thermo-Compression Bonding of Cu", SnAg Pillar Bumps with Electroless Palladium Immersion Gold(EPIG)Surface Finish, 2023, pp.16(4), 1739~
20. T. -Y. Lee, "A study on low thermal expansion coefficient silane-modified non-conductive adhesive(NCA)and Ni-free surface finish for fine-pitch flip-chip thermo-compression bonding", Ph. D, pp.2022

관련 논문AI추천