FOWLP Cu 재배선 적용을 위한 절연층 경화 온도 및 고온/고습 처리가 Ti/PBO 계면접착에너지에 미치는 영향

키워드

참고문헌 (33)

1. 김은경, "IoT 적용을 위한 다종 소자 전자패키징 기술", 마이크로전자 및 패키징학회지, 23(3), pp.1~6 (2016), 한국마이크로전자및패키징학회
2. 김가희, "FOWLP 적용을 위한 Cu 재배선과 WPR 절연층 계면의 정량적 계면접착에너지 측정방법 비교 평가", 마이크로전자 및 패키징학회지, 25(2), pp.41~48 (2018), 한국마이크로전자및패키징학회
3. E. J. Vardaman, "FO-WLP Market and Technology Trends", Proc. 2017 International Conference on Electronics Packaging (ICEP), pp.318~ (2017), IEEE
4. T. Hwang, "Study of Advanced Fan-Out Packages for Mobile Applications", Proc. 68th 2018 Electronic Components and Technology Conference (ECTC), pp.343~ (2018), IEEE
5. V. S. Rao, "Process and Reliability of Large Fan-Out Wafer Level Package based Package-on-Package", Proc. 67th Electronic Components and Technology Conference (ECTC), pp.615~ (2017), IEEE
6. Z. Chen, "Drop Impact Reliability Test and Failure Analysis for Large Size High Density FOWLP Package on Package", Proc. 67th Electronic Components and Technology Conference (ECTC), pp.1196~ (2017), IEEE
7. T. Fujiwara, "Higher Reliability for Low-temperature Curable Positive-Tone Photodefinable Dielectric Materials", Proc. 19th Electronics Packaging Technology Conference (EPTC) (2017), IEEE
8. T. Enomoto, "Recent Progress in Low Temperature Curable Photosensitive Dielectric", Proc. 2017International Conference on Electronics Packaging (ICEP), pp.498~ (2017), IEEE
9. M. Töpper, "Ultra low temperature PBO polymer for wafer level packaging application", Proc. 2011 International Conference on Electronics Packaging(ICEP), pp.452~ (2011), IEEE
10. Y. Shoji, "Development of novel low-temperature curable positive-tone photosensitive dielectric materials with high elongation", Proc. 66th Electronic Components and Technology Conference(ECTC), pp.1707~ (2016), IEEE
11. T. Sasaki, "Low temperature curable polymide for advanced package", J. Photopolym. Sci. Technol, 29(3), pp.379~ (2016)
12. R. Rubner, "Innovation via photosensitive polyimide and poly(benzoxazole)percursors – a review by inventor", J. Photopolym. Sci. Technol, 17(5), pp.685~ (2004)
13. N. Anzai, "Drop test and TCT reliability of buffer coating material for WLCSP", Proc. 64th Electronic Components and Technology Conference(ECTC), pp.829~ (2014), IEEE
14. M. Yoshida, "Highmudulus negative photosensitive polyimide for i-line", J. Photopolym. Sci. technol, 27(2), pp.207~ (2014)
15. M. Amagai, "The Effect of Polyimide Surface Morphology and Chemistry on Package Cracking Induced by Interfacial Delamination", Proc. 1994 IEEE International Reliability Physics Symposium(IRPS), pp.101~ (1994), IEEE
16. J. H. Cho, "Effect of curing temperature on the adhesion strength of polyamideimide", copper joints, 1998, pp.12(5), 507~
17. H. Araki, "Fabrication of Redistribution Structure using Highly Reliable Photosensitive Polyimide for Fan Out Panel Level Packages", Proc. 15th International Wafer-Level Packaging Conference(IWLPC) (2018), IEEE
18. Y. Koyama, "Development of Novel Low-temperature Curable Positive-Tone Photosensitive Dielectric Materials with High Reliability", Proc. 69th Electronic Components and Technology Conference (ECTC), pp.346~ (2019), IEEE
19. Y. Chung, "Coupled self-assembled monolayer for enhancement of Cu diffusion barrier and adhesion properties", RSC Adv, 4, pp.60123~ (2014)
20. M. Jeong, "Effects of post-annealing and temperature", humidity treatments on the interfacial adhesion energy of the Cu, Jpn. J. Appl. Phys, pp.2016, 55[DOI]
21. K. Son, "Interfacial adhesion energies of Ru–Mn direct plateable diffusion barriers prepared by atomic layer deposition for advanced Cu interconnects", J. Mater. Sci. : Mater. Electron, 32, pp.20559~ (2021)
22. R. Shaviv, "Optimizing the Precision of the Four-point Bend Test for the Measurement of Thin-film Adhesion", Microelectronic Eng, 82(2), pp.99~ (2005)
23. R. H. Dauskardt, "Adhesion and debonding of multi-layer thin film structures", Engng. Fract. Mech, 61(1), pp.141~ (1998)
24. P. G. Charalambides, "A Test Specimen for Determining the Fracture Resistance of Bimaterial Interfaces", J. Appl. Mech, 56(1), pp.77~ (1989)
25. A. L. Ruoff, "Improvement of adhesion of copper on polyimide by reactive ion-beam etching", IBM J. Res. Develop, 32(5), pp.626~ (1988)
26. R. Flitsch, "A study of modified polyimide surfaces as related to adhesion", J. Vac. Sci. Technol. A, 8(3), pp.2376~ (1990)
27. H. Wang, "The evolution of poly(hydroxyamide amic acid)to poly(benzoxazole)via stepwise thermal cyclization : Structural changes and gas transport properties", Polymer, 52(22), pp.5127~ (2011)
28. S. L. C. Hsu, "A novel positive photosensitive polybenzoxazole precursor for microelectronic applications", Polymer, 43(25), pp.6743~ (2002)
29. J. E. Graya, "Mechanism of adhesion of electroless-deposited silver on poly(ether urethane)", Thin Solid Films, 484, pp.196~ (2005)
30. K. Son, "Effect of Surface Treatments on the Interfacial Adhesion of Cu RDL for FOWLP", Proc. 18th International Symposium on Microelectronics and Packaging (ISMP) (2019)
31. S. C. Park, "Effect of Temperature", Humidity Treatment Conditions on Interfacial Adhesion Energy between Inkjet-Printed Ag and Polyimide, 2009, pp.48(8), 08HL02~
32. 민경진, "고온다습처리 조건이 무전해 니켈 도금 박막과 폴리이미드 사이의 계면 접착력에 미치는 영향", 대한금속·재료학회지, 47(10), pp.675~680 (2009), 대한금속·재료학회
33. D. -C. Hu, "Humidity effect on polyimide film adhesion", J. Mater. Sci, 27(19), pp.5262~ (1992)

관련 논문AI추천