3차원 하반신 스캔데이터를 이용한 승마바지의 맞음새 분석
An analysis on the Fit Preferences of Breeches using 3D Lower Body Scan data
0
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
Well-fitting riding breeches provide a comfortable ride. Horse-riding breeches should fit the lower body with patches located on the inside of hip and knees to prevent tears and slips. This study provides information about the fit of women's breeches using 3D human body scan data wearing commercially available two breeches according to posture. To get information about breeches fit, we measured the angle of waist line, the length, and the area of the breeches fit on four 20's women. This research showed the problem which was down for waist back line in the case of the horseback riding pose. The back waistline of the riding breeches should be raised compared to the front waistline; subsequently, an increased waistline angle results in less back waistline decrease. The breeches have plenty of length from back waist to crotch so the breech fit can be improved. The thigh circumference increased when riding in the front; therefore, good elasticity of the weft direction of the fabric is recommended. The length increase and the peripheral increase of the front knee significantly increased the surface area of the knee; consequently, knee patch material should be a two-way elastic fabric in all directions to enhance comfort according to riding motion.
Abstract
Well-fitting riding breeches provide a comfortable ride. Horse-riding breeches should fit the lower body with patches located on the inside of hip and knees to prevent tears and slips. This study provides information about the fit of women's breeches using 3D human body scan data wearing commercially available two breeches according to posture. To get information about breeches fit, we measured the angle of waist line, the length, and the area of the breeches fit on four 20's women. This research showed the problem which was down for waist back line in the case of the horseback riding pose. The back waistline of the riding breeches should be raised compared to the front waistline; subsequently, an increased waistline angle results in less back waistline decrease. The breeches have plenty of length from back waist to crotch so the breech fit can be improved. The thigh circumference increased when riding in the front; therefore, good elasticity of the weft direction of the fabric is recommended. The length increase and the peripheral increase of the front knee significantly increased the surface area of the knee; consequently, knee patch material should be a two-way elastic fabric in all directions to enhance comfort according to riding motion.
참고문헌 (15)
- 조윤주, "의복원형 설계의 착의 평가방법 비교", 한국의류산업학회지, 4(4), pp.383~393 (2002), 한국의류산업학회
- 정연희, "인체의 동작을 고려한 스케이트 팬츠 패턴 개발", 한국생활과학회지, 17(1), pp.115~126 (2008), 한국생활과학회
- Kim, Haekyung, "A Study on the Comparative Evaluation of wearing Fitness of Women′s Ready-made Jackets Using 3D Scanner", Journal of the Korean Society of Clothing and Textiles, 25(10), pp.1707~1718 (2001)
- "Daily Vet. Riding population statistics, 45,000 riding people and a total of 30,000 horses" (2013)[URL]
- 김선영, "슬랙스 맞음새 평가 도구 설계에 관한 연구", 한국의류산업학회지, 14(3), pp.454~464 (2012), 한국의류산업학회[DOI]
- Kirk, W., "Fundamental relationship of fabric extensibility to anthropometric requirements and garment performance", Textile Research Journal, 36, pp.37~47 (1966)
- 이혜진, "운전자세에 적합한 기능적 슬랙스 설계에 관한 연구", 한국의류학회지, 26(11), pp.1514~1526 (2002), 한국의류학회
- Lee, Y. H., "A study on the evaluation of jacket pattern for working women", Journal of the Korean Society of Clothing and Textiles, 21(8), pp.1365~1375 (1997)
- 문순이, "60대 후반 노년 여성의 슬랙스 원형 연구", 복식문화연구, 19(5), pp.929~944 (2011), 복식문화학회
- Park, Y. D., "A study on the movement-fitness according to the surface changing of lower-limb -On the movements and shapes of lower-limb-", Journal of the Korean Society of Clothing and Textiles, 20(2), pp.257~269 (1996)
- Park, Y. D., "The study on the lower limb surface changes caused by the limb movements(Part 2) - On the sitting position -", Journal of the Korean Home Economics Association, 21(2), pp.19~28 (1983)
- 백경자, "3차원 바디스캐너를 이용한 남성 상의 원형의 피트성 평가-직접평가와의 비교-", 한국의류학회지, 33(1), pp.139~148 (2009), 한국의류학회
- 서동애, "3D 인체 스캔 데이터를 활용한 체형별 인대모형 개발에 관한 연구", 한국콘텐츠학회 논문지, 12(9), pp.136~145 (2012), 한국콘텐츠학회[DOI]
- 윤미경, "3차원 인체 형상을 이용한 20대 여성의 하반신 전개패턴에 관한 연구", 한국의류학회지, 31(5), pp.692~704 (2007), 한국의류학회
- 윤성화, "무용동작을 위한 밑위길이에 관한 연구", 한국생활과학회지, 11(1), pp.1~14 (2002), 한국생활과학회