본문 바로가기
KERD
논문KCI 등재

Polypropylene 복합방적사의 섬도와 혼용율에 따른 물성

Physical Properties of Polypropylene Blended Yarns with Yarn Counts and Blended Ratio

0

조회

0

다운로드

0

인용

0

참고문헌

키워드

주제분류생활과학

초록

Polypropylene fibers, while having many advantages such as light weight, sweat fast drying, water-repellent, drainage, thermal insulation, anti-static property has a drawback in dyeing. In recent years, the development of dyeable polypropylene fibers has expanded its value in the textile market. The purpose of this study is to fabricate composite spun yarns using polypropylene, acrylic, rayon and wool and to analyze tensile properties, uniformity characteristics, bending properties, hairiness, and surface shape according to the degree of fineness and blended ratio. The specimens consisted of 100% polypropylene spun yarn pp30, pp40 and ppa(pp/acrylic), ppr(pp/rayon), ppw(pp/wool), 5 altogether sed in this study. The results of the study are as follows. The breaking strength of polypropylene spun yarn blended with rayon and acrylic was higher than that of 100% polypropylene spun yarn. The polypropylene spun yarn is higher the fineness been shown to decrease the breaking strength and elongation. The bending properties of polypropylene spun yarns were in the order of ppa>ppr>pp40>pp30>ppw. The unevenness of ppw, ppr, and ppa was higher than pp40 and pp30. With the exception of ppw with crimp properties, pp30 and pp40 were found to have a hairiness index greater than ppr, ppa. In the microscopic photographs of polypropylene spun yarn, pp30, which had the highest hairiness index, was found to have a thick yarn and a large number of hairs, and ppw had hairs of 3 mm or more protruding elongated outwardly.

Abstract

Polypropylene fibers, while having many advantages such as light weight, sweat fast drying, water-repellent, drainage, thermal insulation, anti-static property has a drawback in dyeing. In recent years, the development of dyeable polypropylene fibers has expanded its value in the textile market. The purpose of this study is to fabricate composite spun yarns using polypropylene, acrylic, rayon and wool and to analyze tensile properties, uniformity characteristics, bending properties, hairiness, and surface shape according to the degree of fineness and blended ratio. The specimens consisted of 100% polypropylene spun yarn pp30, pp40 and ppa(pp/acrylic), ppr(pp/rayon), ppw(pp/wool), 5 altogether sed in this study. The results of the study are as follows. The breaking strength of polypropylene spun yarn blended with rayon and acrylic was higher than that of 100% polypropylene spun yarn. The polypropylene spun yarn is higher the fineness been shown to decrease the breaking strength and elongation. The bending properties of polypropylene spun yarns were in the order of ppa>ppr>pp40>pp30>ppw. The unevenness of ppw, ppr, and ppa was higher than pp40 and pp30. With the exception of ppw with crimp properties, pp30 and pp40 were found to have a hairiness index greater than ppr, ppa. In the microscopic photographs of polypropylene spun yarn, pp30, which had the highest hairiness index, was found to have a thick yarn and a large number of hairs, and ppw had hairs of 3 mm or more protruding elongated outwardly.

참고문헌 (38)

  1. Ahmed, M., "Polypropylene fibers, science and technology (Vol. 5)" (1982), Elsevier Science & Technology
  2. Baykal, P. D., "Prediction of strength and elongation properties of cotton", polyester-blended OE rotor yarns, 2006, pp.14(1), 18~21
  3. B.M. Chapman, "The Bending and Creasing of Multicomponent Viscoelastic Fiber Assemblies", Textile Research Journal, 44(4), pp.306~309 (2016), SAGE Publications[DOI]
  4. Qin Chen, "The thermal decomposition and heat release properties of the nylon", cotton, polyester, cotton blend fabrics, pp.Textile Research Journal, 2016[DOI]
  5. 최혜영, "CDP", Tencel 혼방사의 혼합비와 섬도에 따른 물리적 특성의 변화, 2011, pp.48(3), 187~192[DOI]
  6. A. Das, "Studies on cotton–acrylic bulked yarns and fabrics. Part I: Yarn characteristics", Journal of the Textile Institute, 98(3), pp.261~267 (2007), Informa UK Limited[DOI]
  7. Brojeswari Das, "Studies on moisture transmission properties of PV-blended fabrics", Journal of the Textile Institute, 100(7), pp.588~597 (2009), Informa UK Limited[DOI]
  8. H. Dayioglu, "Polymeric dye receptors for disperse dyeable polypropylene fibers", Journal of Applied Polymer Science, 46(9), pp.1539~1545 (1992), Wiley[DOI]
  9. Fuh, P. H., "Relationship between the hairness and twisting principles of solospun and ring spun yarns", Annual conference of the Textile Institute, pp.23~27 (2003)
  10. Geraldes, M. J., "How to improve the thermal comfort with high performance pp fibers", Proceeding of the 2nd AUTEX Conference, pp.428~ (2002)
  11. N.P. Gupta, "Chemically Texturizing Jute and Jute-Polypropylene Blended Yarns", Textile Research Journal, 52(11), pp.694~702 (2016), SAGE Publications[DOI]
  12. You Huh, "Analyzing Structural and Physical Properties of Ring, Rotor, and Friction Spun Yarns", Textile Research Journal, 72(2), pp.156~163 (2016), SAGE Publications[DOI]
  13. Ali Kakvan, "Study on effect of blend ratio on thermal comfort properties of cotton", nylon-blended fabrics with high-performance Kermel fibre, 2014, pp.106(6), 674~682[DOI]
  14. T Karthik, "Analysis of comfort and moisture management properties of polyester", milkweed blended plated knitted fabrics for active wear applications, 2016, pp.47(5), 897~920[DOI]
  15. 강덕희, "메탈릭 자카드 직물의 물리적 성능평가", 한국의류학회지, 33(1), pp.149~159 (2009), 한국의류학회
  16. 강덕희, "메탈릭 자카드 직물의 감성 평가", 한국의류학회지, 33(2), pp.299~307 (2009), 한국의류학회
  17. Kang, T. J., "The hairiness measurement method of spun fiber and effect of the spinning processing condition", Journal of Korean Fiber Society, 24(5), pp.103~113 (1987)
  18. 김현아, "PTT", Tencel, 한국의류산업학회지, pp.2015, 17(6)[DOI]
  19. 김현아, "PP", Tencel, 하이브리드 복합사 구조가 고감성 의류용 직물의 물성에 미치는 영향, pp.한국의류산업학회지, 2015[DOI]
  20. 김현아, "고감성 의류용 PTT", 울, 한국의류학회지, pp.2015, 39(6)[DOI]
  21. 김희숙, "모 혼방직물의 역학적 특성과 태 및 소재 정보에 따른 남성 정장용 소재의 질감이미지와 선호도 평가", 한국생활과학회지, 23(2), pp.317~328 (2014), 한국생활과학회
  22. Young Seok Koo, "Bending behavior of coated yarns", Fibers and Polymers, 2(3), pp.148~152 (2001), Springer Nature[DOI]
  23. Chung-Feng Jeffrey Kuo, "Development of disperse dye polypropylene fiber and process parameter optimization Part I: development of dyeable polypropylene fiber and parameter optimization", Textile Research Journal, 88(1), pp.3~13 (2016), SAGE Publications[DOI]
  24. Chung-Feng Jeffrey Kuo, "Development of disperse dyes polypropylene fiber and process parameter optimization Part II: Dyeable polypropylene fiber production and melt spinning process parameter optimization", Textile Research Journal, 88(13), pp.1505~1516 (2017), SAGE Publications[DOI]
  25. Kwon, H. S., "Development trend of dyeable polypropylene fiber", Fiber Technology and Industry, 9(3), pp.301~311 (2005)
  26. H. T. Lokhande, "Electrokinetic properties of acrylic acid- and methacrylic acid-grafted polypropylene during chemically initiated graft copolymerization", Journal of Applied Polymer Science, 29(10), pp.2989~2996 (1984), Wiley[DOI]
  27. Rana Faruq Mahbub, "Thermal comfort properties of Kevlar and Kevlar", wool fabrics, 2014, pp.84(19), 2094~2102[DOI]
  28. Piller, B., "Integrated multi-layered knitted fabrics – A new generation of textiles polypropylene fibers", Melliand Textilberich, 67, pp.412~416 (1986)
  29. 사아나, "PET, Tencel, Cotton MVS 혼방사의 섬도와 혼용률에 따른 물성 특성", 한국의류산업학회지, 17(2), pp.287~294 (2015), 한국의류산업학회
  30. V. Sciarratta, "Plasma functionalization of polypropylene with acrylic acid", Surface and Coatings Technology, 174-175, pp.805~810 (2003), Elsevier BV[DOI]
  31. Sekar, N., "Dyeable polypropylene fibers : On the research front review of development", Colourage, 47(2), pp.33~34 (2000)
  32. T.W. Son, "Physical modification of polypropylene: preparation of fibres dyeable with disperse dyes", Coloration Technology, 115(12), pp.366~369 (1999), Wiley[DOI]
  33. Teli, M. D., "Polypropylene", Poly(trimethylene terephthalate)meltblend fibres with enhanced dyeability, 2013, pp.2(7), 24~29
  34. Ucar, N., "Thermal properties of 1×1, 2×2, 3×3 rib knit fabrics", Fibres & Textiles in Eastern Europe, 3(47), pp.34~38 (2004)
  35. Xungai Wang, "Studies of JetRing Spinning Part I: Reducing Yarn Hairiness with the JetRing", Textile Research Journal, 67(4), pp.253~258 (1997), SAGE Publications[DOI]
  36. Yang, J. S., "Compact ring spinning technology", Fiber Technology and Industry, 9(2), pp.126~134 (2005)
  37. 예수정, "Linen 혼방 편성물의 쾌적성 및 물성", 한국의류학회지, 37(5), pp.715~723 (2013), 한국의류학회
  38. Chengbing Yu, "Study on dyeable polypropylene fiber and its properties", Journal of Applied Polymer Science, 82(13), pp.3172~3176 (2001), Wiley[DOI]

관련 논문AI추천

이 간행물의 다른 논문 (11건)