본문 바로가기
KERD
논문KCI 등재

PP/Tencel/흡한속건PET/하이브리드 복합사 구조가 고감성 의류용 직물의 물성에 미치는 영향

Effect of Hybrid Yarn Structure Composed of PP/Tencel/Quick dry PET on the Physical Property of Fabric for High Emotional Garment

2

조회

0

다운로드

5

인용

0

참고문헌

키워드

주제분류생활과학

초록

This paper investigated the characteristics of the physical properties of woven fabrics according to the yarn structure and fibre property. It was found that wicking property of woven fabrics made of sheath/core hybrid yarn were better than those of siro spun and siro-fil hybrid yarns, which was caused by platform for transport of moisture vapor by filaments on the core part of sheath core hybrid yarns. In drying property, the fabric specimen woven by PP/Tencel sheath core hybrid yarns as a warp and Coolmax/Tencel spun yarn as a weft showed quick drying property, which was caused by the sheath core hybrid yarn structure as drainage of water moisture and coolmax fibre characteristics as quick dry material. Concerning to breathability and thermal conductivity as heat transport phenomena, it was observed that breathability of fabrics woven with hybrid yarns such as sheath core and siro-fil in the warp and hi-multi filaments in the weft showed the lowest water vapor resistance, which was explained as due to for air gap in the fibres of the spun yarns to restrict the wet heat transport from perspiration vapor. Thermal conductivities of the fabrics woven with PET/Tencel siro-fil yarns in the weft and hybrid yarns such as sheath core and siro-fil in the warp revealed the highest values, which was observed as due to higher thermal conductivity of PET than PP and more contact point between fibres in the sirofil and sheath core hybrid yarns.

Abstract

This paper investigated the characteristics of the physical properties of woven fabrics according to the yarn structure and fibre property. It was found that wicking property of woven fabrics made of sheath/core hybrid yarn were better than those of siro spun and siro-fil hybrid yarns, which was caused by platform for transport of moisture vapor by filaments on the core part of sheath core hybrid yarns. In drying property, the fabric specimen woven by PP/Tencel sheath core hybrid yarns as a warp and Coolmax/Tencel spun yarn as a weft showed quick drying property, which was caused by the sheath core hybrid yarn structure as drainage of water moisture and coolmax fibre characteristics as quick dry material. Concerning to breathability and thermal conductivity as heat transport phenomena, it was observed that breathability of fabrics woven with hybrid yarns such as sheath core and siro-fil in the warp and hi-multi filaments in the weft showed the lowest water vapor resistance, which was explained as due to for air gap in the fibres of the spun yarns to restrict the wet heat transport from perspiration vapor. Thermal conductivities of the fabrics woven with PET/Tencel siro-fil yarns in the weft and hybrid yarns such as sheath core and siro-fil in the warp revealed the highest values, which was observed as due to higher thermal conductivity of PET than PP and more contact point between fibres in the sirofil and sheath core hybrid yarns.

참고문헌 (27)

  1. M. M. Adler, "Mechanisms of Transient Moisture Transport Between Fabrics", Textile Research Journal, 54(5), pp.334~343 (1984), SAGE Publications[DOI]
  2. Bedez, T., "Spinning of short staple fibres by siro spun® system", Tekstil ve Konfeksiyon, 17(1), pp.31~35 (2007)
  3. "Cool light weight wools, Australia"[URL]
  4. K. Ghali, "Experimental Techniques for Measuring Parameters Describing Wetting and Wicking in Fabrics", Textile Research Journal, 64(2), pp.106~111 (1994), SAGE Publications[DOI]
  5. H. Ito, "Water Transport Along Textile Fibers as Measured by an Electrical Capacitance Technique", Textile Research Journal, 63(7), pp.414~420 (1993), SAGE Publications[DOI]
  6. Y.-L. Hsieh, "Liquid Transport in Fabric Structures", Textile Research Journal, 65(5), pp.299~307 (1995), SAGE Publications[DOI]
  7. Halil İbrahim İçoğlu, "Investigation of the fastness properties and color values of cotton fabrics knitted from ring spun and Sirospun ® yarns", Journal of the Textile Institute, 102(2), pp.114~119 (2011), Informa UK Limited[DOI]
  8. "KSK ISO 11092: 2009"[URL]
  9. Lee, A., "Absorption desorption behavior of quick sweat-pick up", dry-fabric and assessment of subjective wetness using JND measurement, Yonsei University, 2006
  10. Lee, D. W., "The relationship between pore size distribution and liquid water transport of cotton and polyester fabrics", Journal of the Korean Society of Clothing and Textiles, 25(2), pp.379~388 (2001)
  11. W.-Y. Liu, "Effect of Strand-spacing Between Roving and Filament on Sirofil Yarn Properties", Textile Research Journal, 77(4), pp.200~204 (2007), SAGE Publications[DOI]
  12. W.-Y. Liu, "Effect of Tension Compensator on Sirofil Yarn Properties", Textile Research Journal, 77(4), pp.195~199 (2007), SAGE Publications[DOI]
  13. S. Liu, "Effect of sirospun spinning with a press bar top pin on qualities of flax", cotton blended yarn, 2012, pp.82(10), 985~993[DOI]
  14. B.A. McGregor, "Effect of fibre, yarn and knitted fabric attributes associated with wool comfort properties", Journal of the Textile Institute, 104(6), pp.606~617 (2013), Informa UK Limited[DOI]
  15. M. Miao, "High-speed video graphic study of filament-core yarn spinning", Journal of the Textile Institute, 101(3), pp.242~252 (2010), Informa UK Limited[DOI]
  16. A. B. Nyoni, "Wicking mechanisms in yarns—the key to fabric wicking performance", Journal of the Textile Institute, 97(2), pp.119~128 (2006), Informa UK Limited[DOI]
  17. S. L. Paek, "Effect of Yarn Type and Twist Factor on Air Permeability, Absorbency, and Hand Properties of Open-end and Ring-spun Yarn Fabrics", Journal of the Textile Institute, 86(4), pp.581~589 (1995), Informa UK Limited[DOI]
  18. U. J. Patil, "Wickability behaviour of single-knit structures", Journal of the Textile Institute, 100(5), pp.457~465 (2009), Informa UK Limited[DOI]
  19. Armin Pourahmad, "Comparison of the properties of Ring, Solo, and Siro core‐spun yarns", Journal of the Textile Institute, 102(6), pp.540~547 (2011), Informa UK Limited[DOI]
  20. Armin Pourahmad, "Production of core-spun yarn by the three-strand modified method", Journal of the Textile Institute, 100(3), pp.275~281 (2009), Informa UK Limited[DOI]
  21. A. P. S. Sawhney, "Improved Method of Producing a Cotton Covered", Polyester Staple-Core Yarn on a Ring Spinning Frame, 1992, pp.62(1), 21~25[DOI]
  22. P. Soltani, "A study on siro-, solo-, compact-, and conventional ring-spun yarns. Part II: yarn strength with relation to physical and structural properties of yarns", Journal of the Textile Institute, 103(9), pp.921~930 (2012), Informa UK Limited[DOI]
  23. M.N. Sun, "Structure and Properties of Cotton Sirospun(R) Yarn", Textile Research Journal, 70(3), pp.261~268 (2000), SAGE Publications[DOI]
  24. Salwa Tashkandi, "An investigation of thermal comfort properties of Abaya woven fabrics", Journal of the Textile Institute, 104(8), pp.830~837 (2013), Informa UK Limited[DOI]
  25. R. K. Varshney, "A study on thermophysiological comfort properties of fabrics in relation to constituent fibre fineness and cross-sectional shapes", Journal of the Textile Institute, 101(6), pp.495~505 (2010), Informa UK Limited[DOI]
  26. Z. Xia, "Fiber trapping comparison of embeddable and locatable spinning with sirofil and siro core-spinning with flute pipe air suction", Textile Research Journal, 82(12), pp.1255~1262 (2012), SAGE Publications[DOI]
  27. L.-N. Zhang, "Geometry Condition for Optimal Two-strand Yarn Spinning Part I: Sirospun", Textile Research Journal, 79(3), pp.243~246 (2009), SAGE Publications[DOI]

관련 논문AI추천

이 간행물의 다른 논문 (14건)