한국 여성 노인 3D 스캔 데이터를 활용한 피트니스 동작별 체표면적 분석
Analysis of Body Surface Area by Fitness Motion Using 3D scan dataof Korean Elderly Female
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
The present study provides reference data required for the design of clothing for the elderly by analyzing the body surface area during fitness motion based on 3D scan data of Korean elderly women. This study was conducted with the procedures of (1) survey of motions and main muscles for fitness, (2) acquisition of 3D scan data, and (3) analysis of rate of change for body surface area during fitness motion. Acquisition of 3D body scan data was obtained from seven elderly females (age: 64-77). We selected 66 anatomical landmarks (40 upper body and 22 lower body) by referring to previous studies. Body surface was segmented by connecting the landmarks marked on the 3D scan data acquired. Analysis of body surface area was conducted in terms of the change rate of surface area in 9 postures of elbow 0°, 90° and 180° for flexion, shoulder 90°, 180° for flexion, shoulder 0°, 180° for abduction, hip 90° for flexion, and knee 90° for flexion compared to the those in the standing posture. The amount of changes in body surface area were 12%-62% in the upper body, 15%-77% in the arm, and 10%-51% in the lower body. A future study on the rate of change of body surface length is needed; in addition, a study on how to apply the results of body surface area and body surface length analysis to clothing pattern design is also necessary.
Abstract
The present study provides reference data required for the design of clothing for the elderly by analyzing the body surface area during fitness motion based on 3D scan data of Korean elderly women. This study was conducted with the procedures of (1) survey of motions and main muscles for fitness, (2) acquisition of 3D scan data, and (3) analysis of rate of change for body surface area during fitness motion. Acquisition of 3D body scan data was obtained from seven elderly females (age: 64-77). We selected 66 anatomical landmarks (40 upper body and 22 lower body) by referring to previous studies. Body surface was segmented by connecting the landmarks marked on the 3D scan data acquired. Analysis of body surface area was conducted in terms of the change rate of surface area in 9 postures of elbow 0°, 90° and 180° for flexion, shoulder 90°, 180° for flexion, shoulder 0°, 180° for abduction, hip 90° for flexion, and knee 90° for flexion compared to the those in the standing posture. The amount of changes in body surface area were 12%-62% in the upper body, 15%-77% in the arm, and 10%-51% in the lower body. A future study on the rate of change of body surface length is needed; in addition, a study on how to apply the results of body surface area and body surface length analysis to clothing pattern design is also necessary.
참고문헌 (25)
- 차유미, "3D동작분석시스템을 이용한 사이클복의 입체적 설계 연구 : 남성용 상의를 중심으로", 박사, 의류학과, pp.2013
- Choi, Y. L., "A method for garment pattern generation by flattening 3D body scan data", International Conference on Digital Human Modeling, pp.803~812 (2007)
- Choi, Y. L., "Surface pattern comparison among lateral body types flattening 3D figure data", Fibers and Polymers, 10(6), pp.837~846 (2009)[DOI]
- "Estimated population by age" (2019)[URL]
- "Exercise tips for the elderly" (2012)[URL]
- 홍은희, "3차원 인체형상의 평면전개에 의한 성인남성의 체형유형별 타이트 핏 토르소원형 설계 : 가상착의 시스템을 활용하여", 박사, 의류학과, pp.2013
- 전은진, "고령자 근효율 향상을 위한 피트니스 압박웨어 시장조사 및 동작특성 조사", 한국의류산업학회지, 20(3), pp.343~352 (2018), 한국의류산업학회[DOI]
- 정연희, "3D 스캔 데이터를 활용한 밀착 패턴원형 개발", 한국의류학회지, 30(1), pp.157~166 (2006), 한국의류학회
- 정연희, "3D 스캔 데이터를 이용하여 개발된 사이클 팬츠 패턴의 축소율에 따른 의복압 및 주관적 착의 평가", 한국생활과학회지, 24(2), pp.255~266 (2015), 한국생활과학회
- Jung, Y. K., "Research on rashguard pattern development according to 3D human data and water ski motion adaptation", master, pp.2016
- 김혜진, "3차원 인체 스캔 데이터를 활용한 한국 중년여성 토르소 원형 설계", 한국의류산업학회지, 13(4), pp.600~613 (2011), 한국의류산업학회
- Kim, I. S., "A study on classification of elderly women’s body type", Journal of Korean Society of Clothing and Textiles, 26(1), pp.27~38 (2002)
- 김인순, "노년 여성의 체형특징 및 유형화에 관한 연구", 박사, 가정학, pp.2000
- Kim, N. Y., "Development of functional compression wear considering pressure levels and blood velocity of upper body", doctor, pp.2016
- 김수아, "지수치를 이용한 노년 여성의 상반신 체형 분류와 판별에 관한 연구", 석사, 의류직물학, pp.2003
- 이정임, "노년 여성의 표준치수 설정에 관한 연구(I) -연령대별 체형특성 및 지역별 체형차-", 한국의류학회지, 27(1), pp.88~99 (2003), 한국의류학회
- 이양경, "노년여성의 측면체형 분석 : 비만과 체형 변형을 중심으로", 석사, 의류학, pp.2008
- 임지영, "하반신 정면 측면 체형의 형태적 분류- 13세~15세 여중생을 대상으로 -", Human Ecology Research, 41(4), pp.101~110 (2003), 대한가정학회
- "Medical expenses over 65 year" (2017)[URL]
- 박혜준, "상반신 밀착패턴 제작을 위한 3차원 인체 표면의 곡률기준 분할", 한국의류학회지, 33(1), pp.68~79 (2009), 한국의류학회
- Park, K. S., "A study on the upper body range of motion - Using a 3-D motion analysis systems about Korean adults", The Research Journal of the Costume Culture, 8(4), pp.587~601 (2000)
- Park, S. J., "3D body scan data flattening for garment pattern using CAD system", Proceedings of the Korean Society of Precision Engineering Conference, pp.303~304 (2007)
- 서추연, "노년 여성의 3-D 입체형상 데이터를 활용한 상반신 원형 설계방법 연구", 한국의류학회지, 32(5), pp.846~858 (2008), 한국의류학회
- Yang, Y., "Development of a prototype pattern based on the 3D surface flattening method for MTM garment production", Fibres & Textiles in Eastern Europe, 19(5)통권 : 88, pp.107~111 (2011)
- 윤미경, "3차원 스캔 데이터를 활용한 스타일별 여성 팬츠 패턴 연구", 한국의류학회지, 40(1), pp.97~113 (2016), 한국의류학회