팬츠 실루엣에 따른 실제착의와 가상착의의 유사도 비교 연구
A Study on the Comparison of Fit Similarity Between the Actual and Virtual Clothing According to the Pants Silhouette
0
조회
0
다운로드
7
인용
0
참고문헌
키워드
초록
The purpose of this study was to compare the similarity between actual and virtual pants using a virtual 3D CLO program. A subject corresponding to the average size of a women in her twenties was selected and an avatar with the same specifications was produced. Silhouettes of the pants were classified into trousers, slacks, and wide pants and images of actual and virtual pants were evaluated from the front, side, and back. The results were as follows: Overall, the resemblance of the trousers was evaluated higher than that of other pants. The average similarity of trousers was 4.20 at the front, 3.98 at the side, and 4.17 at the back, which was much like the actual clothing. In contrast, that of the slacks was 3.62, 3.73, and 3.79 and of the wide pants was 3.81, 3.53, and 3.97. The similarity between the actual and virtual clothing was relatively well reproduced when the shape of the pants was like the silhouette of the human body. However, if the pants were tight or loose, virtual fits failed to display the wrinkles caused by the tightness or the excessive slack. The virtual fit showed fewer wrinkles and did not depict the location and the shape of hemlines as accurately as the actual fit, although virtual fits adequately displayed the baseline and dart on the pants.
Abstract
The purpose of this study was to compare the similarity between actual and virtual pants using a virtual 3D CLO program. A subject corresponding to the average size of a women in her twenties was selected and an avatar with the same specifications was produced. Silhouettes of the pants were classified into trousers, slacks, and wide pants and images of actual and virtual pants were evaluated from the front, side, and back. The results were as follows: Overall, the resemblance of the trousers was evaluated higher than that of other pants. The average similarity of trousers was 4.20 at the front, 3.98 at the side, and 4.17 at the back, which was much like the actual clothing. In contrast, that of the slacks was 3.62, 3.73, and 3.79 and of the wide pants was 3.81, 3.53, and 3.97. The similarity between the actual and virtual clothing was relatively well reproduced when the shape of the pants was like the silhouette of the human body. However, if the pants were tight or loose, virtual fits failed to display the wrinkles caused by the tightness or the excessive slack. The virtual fit showed fewer wrinkles and did not depict the location and the shape of hemlines as accurately as the actual fit, although virtual fits adequately displayed the baseline and dart on the pants.
참고문헌 (22)
- Armstrong, H. J., "Patternmaking for Fashion Design" (2001), Norano
- Chun, J. S., "Clothing construction and pattern making" (2018), Gyomoon
- Ju, K. S., "Usage & education of the CLO 3D virtual clothing program in the development office & academic", Fashion Information and Technology, 13, pp.51~59 (2016)
- 김경아, "남성 슬림 팬츠 패턴 비교 분석 - 3D CLO 가상착의 시스템을 활용하여 -", 복식문화연구, 22(4), pp.605~618 (2014), 복식문화학회[DOI]
- Kim, K. A., "Pattern making for women’s clothes" (2016), Kyoungchun
- 김민경, "3차원 가상착의 시스템의 Mass Customization 적용가능성을 위한 맞음새 비교 연구", 기초조형학연구, 16(6), pp.77~87 (2015), 한국기초조형학회
- 김소라, "디지털 기술의 융합을 통한 패션 디자인 개발에 관한 연구 -빅데이터와 3D 가상착의 프로그램을 중심으로-", 상품문화디자인학연구, (62), pp.285~297 (2020), 한국상품문화디자인학회
- The 6th Size Korea 3D scan & measurement technology report, "Korean Agency for Technology and Standards", Government Printing Office, ~ (2010)
- The 7th Size Korea 3D scan & measurement technology report, "Korean Agency for Technology and Standards", Government Printing Office, ~ (2015)
- 곽연신, "여성 재킷의 실제착의와 가상착의 비교를 통한 3D 가상착의 시스템 개선에 대한 연구", 문화기술의 융합, 2(3), pp.15~22 (2016), 국제문화기술진흥원[DOI]
- Lee, H. C., "Rules of pattern" (2012), Gyomoon
- Lee, H. S., "Patternmaking for Ready-to-wear" (2001), Kyohakyongusa
- 이진숙, "3차원 가상착의와 실제착의를 통한 비만여성의 바지 맞음새 비교", 패션 비즈니스, 17(2), pp.33~45 (2013), 한국패션비즈니스학회[DOI]
- 이나연, "3D 가상의상 소프트웨어를 활용한 가족예복 디자인 개발", 패션 비즈니스, 23(3), pp.35~50 (2019), 한국패션비즈니스학회[DOI]
- 이선경, "3D 의상CAD를 이용한 가상의복과 실물 의복의 형상 비교", 한국디자인포럼, (30), pp.255~264 (2011), 한국디자인트렌드학회[DOI]
- Lim, J. Y., (2014), Kyohakyongusa
- 임지영, "3D 가상착의에 의한 노년 여성의 슬랙스 패턴 설계", 한국의류산업학회지, 21(1), pp.59~66 (2019), 한국의류산업학회[DOI]
- 신주영, "3D virtual clothing simulation을 활용한 국가별 브래지어 패턴 비교", 복식, 66(8), pp.46~60 (2016), 한국복식학회
- 신경희, "Virtual Fitting Program을 활용한 남성복 기본 팬츠 패턴개발 연구- 남성복 교재를 중심으로 -", 한국의류산업학회지, 20(4), pp.410~421 (2018), 한국의류산업학회[DOI]
- Uh, M. K., "Apparel Making" (1999), Kyohakyongusa
- "Virtual fitting room market size, share and covid-19 impact analysis, by component(hardware, software, and services), by services (integration, support, maintenance, and consulting), by application(apparel, eyewear, jewelry, watches, and others), by end user(physical and virtual stores) and regional forecast, 2021- 2028" (2020)[URL]
- Yin, S. Y, "A comparison of fit and appearance between real clothing and virtual clothing depending on types of virtual clothing program, body shape and fit status", master, pp.2015