다공성 흑연의 기공내부로 침투하는 Si 증발입자의 확산
Diffusion of Si Vapor Infiltrating into Porous Graphite
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Graphite’s thermal stability facilitates its widespread use as crucibles and molds in high temperatures processes. However, carbon atoms can be rather easily detached from pores and outer surfaces of the graphite due to the weak molecular force of the c axis of graphites. Detached carbon atoms are known to become a source of dust during fabrication processes, eventually lowering the effective yield of products. As an effort to reduce these problems of dust scattering, we have fabricated SiC composites by employing Si vapor infiltration method into the pores of graphites. In order to understand the diffusion process of the Si vapor infiltration, Si and C atomic percentages of fabricated SiC composites are carefully measured and the diffusion law is used to estimate the diffusion coefficient of Si vapor. A quadratic equation is obtained from the experimental results using the least square method. Diffusion coefficient of Si vapor is estimated using this quadratic equation. The result shows that the diffusion length obtained through the Si vapor infiltration method is about 10.7 times longer than that obtained using liquid Si and clearly demonstrates the usefulness of the present method.
Abstract
Graphite’s thermal stability facilitates its widespread use as crucibles and molds in high temperatures processes. However, carbon atoms can be rather easily detached from pores and outer surfaces of the graphite due to the weak molecular force of the c axis of graphites. Detached carbon atoms are known to become a source of dust during fabrication processes, eventually lowering the effective yield of products. As an effort to reduce these problems of dust scattering, we have fabricated SiC composites by employing Si vapor infiltration method into the pores of graphites. In order to understand the diffusion process of the Si vapor infiltration, Si and C atomic percentages of fabricated SiC composites are carefully measured and the diffusion law is used to estimate the diffusion coefficient of Si vapor. A quadratic equation is obtained from the experimental results using the least square method. Diffusion coefficient of Si vapor is estimated using this quadratic equation. The result shows that the diffusion length obtained through the Si vapor infiltration method is about 10.7 times longer than that obtained using liquid Si and clearly demonstrates the usefulness of the present method.
참고문헌 (18)
- D. G. Kim, "Study on the Effects of High Temperature Heat Treatment on the Physical and Mechanical Properties of Carbon Fiber and Carbon Composites, Kor", Kor. J. Mater. Res, 4, pp.287~294 (1994)
- 조광연, "흑연의 실란커플링에 의한 수지함침", 영문지, 40(10), pp.17~1026 (2003), 한국세라믹학회
- 이태호, "세라믹 매트릭스 복합재료 연구 개발 동향 및 전망", Composites Research, 27(4), pp.123~129 (2014), 한국복합재료학회
- S. Y. Kim, "Wear-Mechanical Properties of Filler-Added Liquid Silicon Infiltration C", C–SiC Composites, 2013, pp.44, 107~113
- H. S. Kang, "Autoclave Processing of Thick Carbon-Phenolic Composites", J. Kor. Soc. Composite Materials, 8, pp.1~8 (1995)
- 홍석기, "고품질 유리질 카본 코팅을 위한 페놀 수지의 고압 경화", 한국세라믹학회지, 48(2), pp.141~146 (2011), 한국세라믹학회
- E. Lopez-Honorato, "Structure and Mechanical Properties of Pyrolytic Carbon Produced by Fluidized Bed Chemical Vapor Deposition", Nucl. Eng. Design, 238, pp.3121~3128 (2008)
- K. Nakajima, "Crystal Growth of Si for Solar Cells", pp.97~119 (2009), Springer
- 이예능, "실리콘 용탕으로부터 직접 제조된 태양광용 다결정 실리콘의 SiC 오염 연구", 한국주조공학회지, 33(2), pp.69~74 (2013), 한국주조공학회[DOI]
- Popper P., "Special ceramics, The Preparation of Dense Self-Bonded Silicon Carbide Bodies", ~ (1960)
- W. B. Hillig, "Silicon", Silicon Carbide Composites, 1975, pp.54, 1054~1056
- E. Fitzer, "Silicon Carbide Fiber-Reinforced", Am. Ceram. Soc. Bull, 65, pp.326~335 (1986)
- D. Sun, "Laminated Biomorphous SiC", Si Porous Ceramics Made from Wood Veneer, 2012, pp.34, 528~532
- 윤성호, "Fabrication of Carbon Fiber Reinforced Reaction Bonded SiC Composite Fabricated by a Molten Si Infiltration Method ; I. The Effect of Carbon Fiber Coating Process", 한국세라믹학회지, 45(9), pp.531~536 (2008), 한국세라믹학회
- P. Greil, "Biomorphic Cellular Silicon Carbide Ceramics from Wood: I. Processing and Microstructure", J. Euro. Ceram. Soc, 18, pp.1961~1973 (1998)
- C. D. Shackelford, "Laboratory Diffusion Testing for Waste Disposal-A review", J. Contam. Hydro, 7, pp.177~217 (1991)
- E. Fitzer, "Fiber-Reinforced Silicon Carbide", Am. Ceram. Soc. Bull, 65, pp.326~335 (1986)
- Z. Yang, "Infiltration Mechanism of Diamond", SiC Composites Fabricated by Si-Vapor Vacuum Reactive Infiltration Process, 2013, pp.33, 869~878