알칼리 수용액에서 산소환원반응에 대한 다공성 AuCu 덴드라이트 표면의 전기화학적 특성 평가
Electrochemical properties of porous AuCu dendrite surface for the oxygen reduction reaction in alkaline solutions
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Porous dendrite structure AuCu alloy was formed using a hydrogen bubble template (HBT) technique by electroplating to improve the catalytic performance of gold, known as an excellent oxygen reduction reaction (ORR) catalyst in alkaline medium. The rich Au surface was maximized by selectively electrochemical etching Cu on the AuCu dendrite surface well formed in a leaf shape. The catalytic activity is mainly due to the synergistic effect of Au and Cu existing on the surface and inside of the particle. Au helps desorption of OH- and Cu contributes to the activation of O2 molecule. Therefore, the porous AuCu dendrite alloy catalyst showed markedly improved catalytic activity compared to the monometallic system. The porous structure AuCu formed by the hydrogen bubble template was able to control the size of the pores according to the formation time and applied current. In addition, the Au-rich surface area increased by selectively removing Cu through electrochemical etching was measured using an electrochemical calculation method (ECSA). The results of this study suggest that the alloying of porous AuCu dendrites and selective Cu dissolution treatment induces an internal alloying effect and a large specific surface area to improve catalyst performance.
Abstract
Porous dendrite structure AuCu alloy was formed using a hydrogen bubble template (HBT) technique by electroplating to improve the catalytic performance of gold, known as an excellent oxygen reduction reaction (ORR) catalyst in alkaline medium. The rich Au surface was maximized by selectively electrochemical etching Cu on the AuCu dendrite surface well formed in a leaf shape. The catalytic activity is mainly due to the synergistic effect of Au and Cu existing on the surface and inside of the particle. Au helps desorption of OH- and Cu contributes to the activation of O2 molecule. Therefore, the porous AuCu dendrite alloy catalyst showed markedly improved catalytic activity compared to the monometallic system. The porous structure AuCu formed by the hydrogen bubble template was able to control the size of the pores according to the formation time and applied current. In addition, the Au-rich surface area increased by selectively removing Cu through electrochemical etching was measured using an electrochemical calculation method (ECSA). The results of this study suggest that the alloying of porous AuCu dendrites and selective Cu dissolution treatment induces an internal alloying effect and a large specific surface area to improve catalyst performance.
참고문헌 (33)
- Y. Li, "Recent advances in zinc–air batteries", Chemical Society Reviews, 43, pp.5257~5275 (2014)
- V. S. Bagotsky, "Electrochemical power sources: batteries, fuel cells, and supercapacitors" (2015), John Wiley & Sons, Place Published
- Y. Yang, "Combinatorial Studies of Palladium-Based Oxygen Reduction Electrocatalysts for Alkaline Fuel Cells", Journal of the American Chemical Society, 142, pp.3980~3988 (2020)
- H. Gong, "Boosting the catalysis of AuCuMo for oxygen reduction: Important roles of an optimized electronic structure and surface electrochemical stability", Journal of Alloys and Compounds, pp.155552~ (2020)
- H. Wang, "Synergistically enhanced oxygen reduction electrocatalysis by subsurface atoms in ternary PdCuNi alloy catalysts", Advanced Functional Materials, 28, pp.1707219~ (2018)
- J. Wang, "Highly active and stable AuNi dendrites as an electrocatalyst for the oxygen reduction reaction in alkaline media", Journal of Materials Chemistry A, 4, pp.17828~17837 (2016)
- M. H. Naveen, "Dealloyed AuNi dendrite anchored on a functionalized conducting polymer for improved catalytic oxygen reduction and hydrogen peroxide sensing in living cells", Advanced Functional Materials, 26, pp.1590~1601 (2016)
- N. Zhang, "Nano-Intermetallic AuCu3Catalyst for Oxygen Reduction Reaction : Performance and Mechanism", Small, 10, pp.2662~2669 (2014)
- N. Gao, "Electrochemical co-deposition synthesis of Au-ZrO2-graphene nanocomposite for a nonenzymatic methyl parathion sensor", Anal Chim Acta, 1072, pp.25~34 (2019)
- M. Jiang, "The selective capture of Pb 2+in rice phloem sap using glutathione-functionalized gold nanoparticles", multi-walled carbon nanotubes : enhancing anti-interference electrochemical detection, 2018, pp.5, 2761~2771
- J. K. Nørskov, "Origin of the overpotential for oxygen reduction at a fuel-cell cathode", The Journal of Physical Chemistry B, 108, pp.17886~17892 (2004)
- Z. Duan, "Theoretical resolution of the exceptional oxygen reduction activity of Au(100)in alkaline media", ACS Catalysis, 9, pp.5567~5573 (2019)
- S. Strbac, "The influence of pH on reaction pathways for O2 reduction on the Au(100)face", Electrochimica Acta, 41, pp.2903~2908 (1996)
- S. Strbac, "The influence of OH-chemisorption on the catalytic properties of gold single crystal surfaces for oxygen reduction in alkaline solutions", Journal of Electroanalytical Chemistry, 403, pp.169~181 (1996)
- D. Mei, "Mechanistic and kinetic implications on the ORR on a Au (100) electrode: pH, temperature and H–D kinetic isotope effects", Physical Chemistry Chemical Physics, 16, pp.13762~13773 (2014)
- V. R. Stamenkovic, "Energy and fuels from electrochemical interfaces", Nature materials, 16, pp.57~69 (2017)
- H. Gong, "Enhanced electrocatalytic performance of self-supported AuCuCo for oxygen reduction and evolution reactions", Electrochimica Acta, 252, pp.261~267 (2017)
- G. Wang, "AuCu intermetallic nanoparticles : surfactant-free synthesis and novel electrochemistry", Journal of Materials Chemistry, 22, pp.15769~15774 (2012)
- X. Tan, "Pt–Au–Co alloy electrocatalysts demonstrating enhanced activity and durability toward the oxygen reduction reaction", ACS Catalysis, 5, pp.1513~1524 (2015)
- W. Zhan, "Crystal structural effect of AuCu alloy nanoparticles on catalytic CO oxidation", Journal of the American Chemical Society, 139, pp.8846~8854 (2017)
- M. I. Awad, "An electrocatalytic oxygen reduction by copper nanoparticles-modified Au(100)-rich polycrystalline gold electrode in 0. 5 M KOH", Journal of power sources, 226, pp.306~312 (2013)
- B. J. Plowman, "Building with bubbles : the formation of high surface area honeycomb-like films via hydrogen bubble templated electrodeposition", Chemical Communications, 51, pp.4331~4346 (2015)
- M. Wang, "Hierarchically 3D porous films electrochemically constructed on gas–liquid–solid three-phase interface for energy application", Journal of Materials Chemistry A, 5, pp.9488~9513 (2017)
- J. Niu, "Effect of electrodeposition parameters on the morphology of three-dimensional porous copper foams", Int. J. Electrochem. Sci, 10, pp.7331~7340 (2015)
- H. Zhang, "Effect of bubble behavior on the morphology of foamed porous copper prepared via electrodeposition", Journal of The Electrochemical Society, 160, pp.D441~ (2013)
- H. Xu, "Self-supported porous 2D AuCu triangular nanoprisms as model electrocatalysts for ethylene glycol and glycerol oxidation", Journal of Materials Chemistry A, 5, pp.15932~15939 (2017)
- A. S. Nugraha, "Electrochemical synthesis of mesoporous Au–Cu alloy films with vertically oriented mesochannels using block copolymer micelles", ACS applied materials & interfaces, 10, pp.23783~23791 (2018)
- M. Kuhn, "Charge redistribution and electronic behavior in a series of Au-Cu alloys", Physical Review B, 49, pp.1647~ (1994)
- B. Hvolbæk, "Catalytic activity of Au nanoparticles", Nano Today, 2, pp.14~18 (2007)
- P. Quaino, "Why is gold such a good catalyst for oxygen reduction in alkaline media?", Angewandte Chemie International Edition, 51, pp.12997~13000 (2012)
- F. Abild-Pedersen, "Scaling properties of adsorption energies for hydro-gen-containing molecules on transition-metal surfaces", Physical review letters, 99, pp.016105~ (2007)
- J. L. Fernández, "Thermodynamic guidelines for the design of bimetallic catalysts for oxygen electroreduction and rapid screening by scanning electrochemical microscopy. M− Co (M: Pd, Ag, Au)", Journal of the American Chemical Society, 127, pp.357~365 (2005)
- S. Trasatti, "Real surface area measurements in electrochemistry", Pure and applied chemistry, 63, pp.711~734 (1991)