Lateral growth of PEO films on Al7050 alloy in 0.1 M NaAlO2
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
This paper investigated generation behavior of micro-arcs and growth behavior of PEO films on the AA7050 disc specimen in 0.1 M NaAlO2 solution under the application of 1200 Hz anodic pulse current. Morphologies, thickness and surface roughness of PEO films were examined at the edge part and central part separately. Micro-arcs were generated first at the edge part and then moved towards the central part with PEO treatment time, indicating lateral growth of PEO films. The lateral growth resulted in uniform PEO thickness of about 5 μm and surface roughness of about 0.5 μm. Moving of the arcs from the edge towards the central part appeared only one time and large size arcs were generated at the edge before completing the central part with small size micro-arcs. This suggests that vertical growth starts before completing the lateral growth. Large size arcs generated at the edge resulted in the formation of relatively large size pores within the PEO films on the AA7050 disc specimen.
Abstract
This paper investigated generation behavior of micro-arcs and growth behavior of PEO films on the AA7050 disc specimen in 0.1 M NaAlO2 solution under the application of 1200 Hz anodic pulse current. Morphologies, thickness and surface roughness of PEO films were examined at the edge part and central part separately. Micro-arcs were generated first at the edge part and then moved towards the central part with PEO treatment time, indicating lateral growth of PEO films. The lateral growth resulted in uniform PEO thickness of about 5 μm and surface roughness of about 0.5 μm. Moving of the arcs from the edge towards the central part appeared only one time and large size arcs were generated at the edge before completing the central part with small size micro-arcs. This suggests that vertical growth starts before completing the lateral growth. Large size arcs generated at the edge resulted in the formation of relatively large size pores within the PEO films on the AA7050 disc specimen.
참고문헌 (22)
- 문상혁, "6xxx계 알루미늄 합금의 경질 아노다이징 피막 형성 특성 연구", 한국표면공학회지, 52(4), pp.203~210 (2019), 한국표면공학회[DOI]
- 문성모, "황산 용액에서 Al6061 합금의 아노다이징 피막 형성거동", 한국표면공학회지, 51(6), pp.393~399 (2018), 한국표면공학회[DOI]
- 문성모, "황산용액에서 Al7075 합금 표면의 양극산화피막 형성거동", 한국표면공학회지, 47(4), pp.155~161 (2014), 한국표면공학회[DOI]
- S. Moon, "Anodic oxidation of Mg-Sn alloys in alkaline solutions", Corrosion Science, 65, pp.494~501 (2012)
- S. Moon, "The formation and dissolution of anodic oxide films on pure aluminium in alkaline solution", Electrochimica Acta, 44, pp.2445~2454 (1999)
- S. Moon, "The mechanism of stress generation during the growth of anodic oxide films on pure aluminium in acidic solutions", Electrochimica Acta, 43, pp.3117~3126 (1998)
- 김주석, "알루미늄 2024 합금의 플라즈마 전해산화 피막의 형성 거동 및 피막 물성에 미치는 인산나트륨 농도의 영향", 한국표면공학회지, 53(6), pp.351~359 (2020), 한국표면공학회
- 문성모, "Lateral Growth of PEO Films on Al1050 Alloy in an Alkaline Electrolyte", 한국표면공학회지, 50(1), pp.10~16 (2017), 한국표면공학회[DOI]
- 문성모, "PEO Film Formation Behavior of Al1050 Alloy Under Direct Current in an Alkaline Electrolyte", 한국표면공학회지, 50(1), pp.17~23 (2017), 한국표면공학회[DOI]
- 박철기, "Al6061합금의 PEO 피막 형성에 미치는 AC 전류밀도의 영향", 한국표면공학회지, 52(3), pp.138~144 (2019), 한국표면공학회[DOI]
- 이정형, "해양환경용 알루미늄 합금의 플라즈마 전해 산화 시 표면 특성에 관한 불화칼륨(KF)의 영향", 한국표면공학회지, 49(3), pp.280~285 (2016), 한국표면공학회[DOI]
- 이정형, "Characterization of Ceramic Oxide Layer Produced on Commercial Al Alloy by Plasma Electrolytic Oxidation in Various KOH Concentrations", 한국표면공학회지, 49(2), pp.119~124 (2016), 한국표면공학회[DOI]
- E. Matykina, "Plasma electrolytic oxidation of pre-anodized aluminium", Corrosion Science, 51, pp.2897~2905 (2009)
- S. Moon, "Generation mechanism of microdischarges during plasma electrolytic oxidation of Al in aqueous solutions", Corrosion Science, 51, pp.1506~1512 (2009)
- 권두영, "AZ91 마그네슘 합금의 플라즈마 전해산화 피막 형성 및 물성에미치는 0.1 M NaOH + 0.05 M NaF 용액 중 Na2SiO3 농도의 영향", 한국표면공학회지, 53(2), pp.59~66 (2020), 한국표면공학회
- 문성모, "AZ31 Mg합금의 PEO피막 형성거동에 미치는 인산나트륨 농도의 영향", 한국표면공학회지, 52(5), pp.265~274 (2019), 한국표면공학회[DOI]
- 문성모, "Effect of NaOH Concentration on the PEO Film Formation of AZ31 Magnesium Alloy in the Electrolyte Containing Carbonate and Silicate Ions", 한국표면공학회지, 50(5), pp.308~314 (2017), 한국표면공학회[DOI]
- 권두영, "인산 및 규산 이온이 포함된 수용액에서 AZ31 마그네슘 합금의 플라즈마전해산화 피막의 구조에 미치는 수산화나트륨 농도의 영향", 한국표면공학회지, 49(1), pp.46~53 (2016), 한국표면공학회[DOI]
- 문성모, "Anodic Oxide Films Formed on AZ31 Magnesium Alloy by Plasma Electrolytic Oxidation Method in Electrolytes Containing Various NaF Concentrations", 한국표면공학회지, 49(3), pp.225~230 (2016), 한국표면공학회[DOI]
- 문성모, "Anodic Oxidation Behavior of AZ31 Magnesium Alloy in Aqueous Electrolyte Containing Various Na2CO3 Concentrations", 한국표면공학회지, 49(4), pp.331~338 (2016), 한국표면공학회[DOI]
- 문성모, "AZ31 마그네슘 합금의 플라즈마전해산화 피막 형성에 미치는 수산화 이온 및 규산 이온의 영향", 한국표면공학회지, 47(4), pp.147~154 (2014), 한국표면공학회[DOI]
- X. Lu, "Plasma electrolytic oxidation coatings with particle additions – A review", Surface and Coatings Technology, 307, pp.1165~1182 (2016)