알루미늄 5456-H116 합금에 대하여 최적 마찰교반프로세싱 조건 규명 및 기계적 특성 평가
Evaluation of Mechanical Characteristic and Investigation on Optimum Condition in Friction Stir Processing for 5456-H116 Al Alloy
3
조회
0
다운로드
8
인용
0
참고문헌
키워드
초록
Friction stir welding(FSW) was developed as a new solid state welding technique by The Welding Institute (TWI). On the basis of FSW, a new processing technique, friction stir processing (FSP), has recently been developed. FSP has been applied to cast aluminum alloy to modify the microstructure to enhance mechanical characteristic. FSP is a new solid state processing technique for microstructural modification in metallic materials. FSP has been applied to aluminum alloy to modify the microstructure to enhance mechanical characteristic. In this study, we investigated optimum condition friction stir processing with the evaluation of mechanical characteristic for 5456-H116 Al alloy. The mechanical characteristics of base metal similar with in 15 mm/min, 250 RPM with full screw probe. This condition is concluded that optimum friction stir processing condition. The result of this investigation will be able to application for repair of welding part for aluminum ship.
Abstract
Friction stir welding(FSW) was developed as a new solid state welding technique by The Welding Institute (TWI). On the basis of FSW, a new processing technique, friction stir processing (FSP), has recently been developed. FSP has been applied to cast aluminum alloy to modify the microstructure to enhance mechanical characteristic. FSP is a new solid state processing technique for microstructural modification in metallic materials. FSP has been applied to aluminum alloy to modify the microstructure to enhance mechanical characteristic. In this study, we investigated optimum condition friction stir processing with the evaluation of mechanical characteristic for 5456-H116 Al alloy. The mechanical characteristics of base metal similar with in 15 mm/min, 250 RPM with full screw probe. This condition is concluded that optimum friction stir processing condition. The result of this investigation will be able to application for repair of welding part for aluminum ship.
참고문헌 (15)
- 김성종, "다양한 용접기술을 적용한 선박용 알루미늄합금의 기계적 특성 평가", 해양환경안전학회지, 13(3), pp.223~228 (2007), 해양환경안전학회
- 김성종, , 한국 마린엔지니어링학회지, 30, pp.540~ (2006)
- 윤여완, "고강도 7xxx 알루미늄 합금의 응력부식균열에 미치는 부식환경과 응력속도의 영향", 한국표면공학회지, 41(3), pp.121~128 (2008), 한국표면공학회
- 김준탁, "고강도 Al-Zn-Mg-Cu 합금에서 조성에 따른 응력부식균열 특성", 한국표면공학회지, 41(3), pp.109~113 (2008), 한국표면공학회
- W. M. Thomas, "GB Patent Application No. 9125978.8", ~, pp.특허 (1991)
- W. M. Thomas, "US Patent No. 5460317", ~, pp.특허 (1995)
- C. J. Dawes, , Weld. J., 75, pp.41~ (1996)
- Z. Y. Ma, , Materials Science and Engineering, A, 433, pp.269~ (2006)
- K. Nakata, , Materials Science and Engineering, A, 437, pp.274~ (2006)
- Z. Y. Ma, , Scripta Materialia, 54, pp.1623~ (2006)
- M. Mahoney, , TMS, pp.205~ (2001)
- J.-Q. Su, , Materials Science and Engineering, A, 405, pp.277~ (2005)
- 권용재, , 대한 용접ㆍ접합학회, 추계 학술대회 발표 논문, pp.253~ (2003)
- 권용재, , 25, pp.228~ (2007), 대한 용접ㆍ접합학회
- 이창용, , 대한 용접·접합학회, 추계학술발표대회 발표논문, pp.248~ (2006)