본문 바로가기
KERD
논문KCI 등재

무전해법으로 Slide Glass 위에 도금된 Ni층의 접착력에 미치는 열처리의 영향

Effect of Heat Treatment on the Adhesive Strength of Electoless Nickel Deposits

2

조회

0

다운로드

1

인용

0

참고문헌

키워드

주제분류기계공학

초록

유리의 표면처리로 에칭이나 표면 결합제는 무전해 니켈 도금층의 접착력을 충분히 향상시키지 못했다. 접착력뿐만 아니라 경도에 미치는 열처리의 영향을 접착력 테스트와 초미소 경도기를 이용하여 조사하였다. 열처리는 접착력과 경도를 효과적으로 향상시켰으며 특히 400℃에서 1시간 열처리한 경우가 가장 우수하였다. XRD분석은 표면경도와 접착력 상승은 각각 Ni_3P의 도금층 내 석출과 기지와 도금층 사이에 NiSiO_4 결합임을 나타내었다. 열처리 조건에 따른 접착력과 경도 상승의 원인과 거동은 본 논문에 자세히 서술되었다.

Abstract

Surface modification before coating nickel by coupling agents and/or etchant of glass did not provide enough adhesive strength of electroless nickel deposits on glass. Effect of heat treatments on hardness as well as adhesion of nickel deposits was studied by using tape test for adhesion, nanoindenter for hardness and glancing angle x-ray diffractometer (GAXRD) for phase characterization. Heat treatment improved hardness as well as adhesion. XRD results give that the improvements of adhesion and hardness are due to the formation of NiSiO_4 around the interface between the nickel deposits and the glass and the precipitation of Ni_3P causing precipitation hardening, respectively. The details in effects of heat treatment on adhesion and hardness are described here

참고문헌 (12)

  1. B. Jiang, , Optical materials, 31, pp.1532~ (2009)
  2. C. K. Lee, , Surf. Coat. Technol, 202, pp.4868~ (2008)
  3. S. Wei, , Juan Chen and Lifang Liang; Applied Surface Science, 257, pp.8067~ (2011)
  4. S. C. Domenech, , Appl. Surf. Sci, 220, pp.238~ (2003)
  5. A. Abdel Aal, , Appl. Surf. Sci., 254, pp.1966~ (2008)
  6. M. Palaniappa, , Mater. Sci. Eng, 471, pp.165~ (2007)
  7. P. Walker, "Silane and Other Adhesion Promoters in Adhesive Technology in Handbook of Adhesive Technology Revised and Expanded", pp.53~ (2003), CRC Press
  8. Y. Huang, , Mater. Lett, 61, pp.1742~ (2007)
  9. S. Hsieh, , J. Nanosci. Nanotechnol, 9, pp.2894~ (2009)
  10. M. Islam, , Surf. Coat. Technol, 205, pp.4397~ (2011)
  11. W. Zhao, , Fine Chem, 22, pp.5~ (2005)
  12. S. O. Lee, , J. Kor. Inst. Surf. Eng, 23, pp.203~ (1990)

관련 논문AI추천

열처리 조건에 따른 무전해 Ni/전해 Cr 이중도금의 계면반응 및 균열성장거동 분석박영배, 변응선, 손기락, 이규환, 이병호, 최명희한국마이크로전자및패키징학회 · 마이크로전자 및 패키징학회지2016 · 제23권 제3호전해 Cr/Ni-P 도금막의 열 사이클 신뢰성 및 균열거동 분석박영배, 손기락, 이규환, 이진아한국마이크로전자및패키징학회 · 마이크로전자 및 패키징학회지2019 · 제26권 제4호4점굽힘시험법을 이용한 함몰전극형 Si 태양전지의 무전해 Ni-P 전극 계면 접착력 평가김미성, 김정규, 박영배, 이규환, 이은경, 임재홍한국마이크로전자및패키징학회 · 마이크로전자 및 패키징학회지2012 · 제19권 제1호Ni-W 합금전착층중의 W함량과 열처리에 따른 결정구조 및 기계적 성질 변화에 관한 연구유황룡, 이수갑, 장시성, 황운석한국재료부식학회 · CORROSION SCIENCE AND TECHNOLOGY2001 · 제30권 제3호니켈-인 도금 층의 기계적 성질에 미치는 아인산 농도의 영향강수영, 양승기, 황운석한국표면공학회 · 한국표면공학회지2015 · 제48권 제3호후속 열처리 조건에 따른 무전해 니켈 도금박막과 폴리이미드 사이의 계면접착력 평가민경진, 박성철, 박영배, 이건환, 이규환, 이지정한국마이크로전자및패키징학회 · 마이크로전자 및 패키징학회지2007 · 제14권 제4호

이 간행물의 다른 논문 (8건)