저탄소강의 크롬도금층 형성 및 내식성에 미치는 Na2MoO4 첨가의 영향
The effect of Na2MoO4 addition on the formation and corrosion resistance of Cr-electroplated layer of low carbon steel
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Presence of cracks in electrodeposited hard chromium layer, which provide a path of corrosive media to steel substrate, is a serious issue in metal finishing with chromium electroplating. In this study, we added sodium molybdate in an electrolyte for chromium electroplating bath. 130g/L of sodium molybdate in Sargent bath for chromium electroplating causes a codepostion of molybdenum with chromium in a rage of 0.61 ~ 3.14 wt.%. The co-deposited molybdenum enhances the crystallinity of chromium layer, thus the hardness is slightly decreases by the addition of molybdate in electrolyte. However, due to the co-deposition of molybdenum, a crack-free chromium layer could be electrodeposited. Such crack-free chromium layer shows a significantly improved corrosion resistance.
Abstract
Presence of cracks in electrodeposited hard chromium layer, which provide a path of corrosive media to steel substrate, is a serious issue in metal finishing with chromium electroplating. In this study, we added sodium molybdate in an electrolyte for chromium electroplating bath. 130g/L of sodium molybdate in Sargent bath for chromium electroplating causes a codepostion of molybdenum with chromium in a rage of 0.61 ~ 3.14 wt.%. The co-deposited molybdenum enhances the crystallinity of chromium layer, thus the hardness is slightly decreases by the addition of molybdate in electrolyte. However, due to the co-deposition of molybdenum, a crack-free chromium layer could be electrodeposited. Such crack-free chromium layer shows a significantly improved corrosion resistance.
참고문헌 (17)
- N Imaz, "Chemometrics applied to functional chromium electroplating by pulse plating techniques", Transactions of the IMF, 90(5), pp.259~266 (2012), Informa UK Limited[DOI]
- Dongwook Lim, "Pulse-reverse electroplating of chromium from Sargent baths: Influence of anodic time on physical and electrochemical properties of electroplated Cr", International Journal of Refractory Metals and Hard Materials, 89, pp.105213~ (2020), Elsevier BV[DOI]
- M.Heydarzadeh Sohi, "Comparative tribological study of hard and crack-free electrodeposited chromium coatings", Journal of Materials Processing Technology, 138(1-3), pp.219~222 (2003), Elsevier BV[DOI]
- Y.B Song, "Current efficiency and polarization behavior of trivalent chromium electrodeposition process", Electrochimica Acta, 48(4), pp.349~356 (2002), Elsevier BV[DOI]
- Seong Woo Yang, "FCCI barrier performance of electroplated Cr for metallic fuel", Journal of Nuclear Materials, 401(1-3), pp.98~103 (2010), Elsevier BV[DOI]
- K.-M. Yin, "A study on the deposit uniformity of hard chromium plating on the interior of small-diameter tubes", Surface and Coatings Technology, 114(2-3), pp.213~223 (1999), Elsevier BV[DOI]
- Zhixiang Zeng, "The correlation between the hardness and tribological behaviour of electroplated chromium coatings sliding against ceramic and steel counterparts", Surface and Coatings Technology, 201(6), pp.2282~2288 (2006), Elsevier BV[DOI]
- T. Watanabe, "Current Topics in Amorphous Materials", pp.137~ (1993), North-Holland
- Lingyan Zhang, "Surface Alloys of 0.45 C Carbon Steel Produced by High Current Pulsed Electron Beam", High Temperature Materials and Processes, 38(2019), pp.444~451 (2018), Walter de Gruyter GmbH[DOI]
- Dimitri Del Pianta, "Determination of the chromium(III) reduction mechanism during chromium electroplating", Electrochimica Acta, 284, pp.234~241 (2018), Elsevier BV[DOI]
- Hongyu Shen, "Characteristics and properties of Cr N compound layer produced by plasma nitriding of Cr-electroplated of AISI 304 stainless steel", Surface and Coatings Technology, 385, pp.125450~ (2020), Elsevier BV[DOI]
- H.-H. Sheu, , Int. J. Electrochem. Sci, pp.7099~7110 (2016)
- Lingyun Xu, "Electroplating of Thick Hard Chromium Coating from a Trivalent Chromium Bath Containing a Ternary Complexing Agent: A Methodological and Mechanistic Study", ACS Sustainable Chemistry & Engineering, 8(41), pp.15540~15549 (2020), American Chemical Society (ACS)[DOI]
- 강수영, "첨가제에 의한 경질 크롬 도금 층의 열처리 후기계적 특성 향상에 관한 연구", 한국표면공학회지, 47(3), pp.116~120 (2014), 한국표면공학회[DOI]
- 이주열, "3가크롬 이온의 전착 반응에 용액 산도 및 유기물 첨가제가 미치는 영향 연구", 한국표면공학회지, 43(6), pp.297~303 (2010), 한국표면공학회
- G. -C. Ye, , J. Korean Inst. Surf. Eng, 37, pp.12~31 (2004)
- 김만, "환경친화성 경질 3가 크롬도금의 연구동향", 한국표면공학회지, 37(3), pp.179~184 (2004), 한국표면공학회