국부적 양극산화 기술 동향
Technological Trends in a local anodization
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Anodization is an electrochemical process that electrochemically converts a metal surface into an oxide layer, resulting in enhanced corrosion resistance, wear resistance, and improved aesthetic appearance. Local anodization, also known as selective anodization, is a modified process that enables specific regions or patterns on the metal surface to undergo anodization instead of the entire surface. Several methods have been attempted to produce oxide layers via localized anodic oxidation, such as using a mask or pre-patterned substrate. However, these methods are often intricate, time-consuming, and costly. Conversely, the direct writing or patterning approach is a more straightforward and efficient way to fabricate the oxide layers. This review paper intends to enhance our comprehension of local anodization and its potential applications in various fields, including the development of nanotechnologies. The application of anodization is promising in surface engineering, where the anodic oxide layer serves as a protective coating for metals or modifies the surface properties of materials. Furthermore, anodic oxidation can create micro- and nano-scale patterns on metal surfaces. Overall, the development of efficient and cost-effective anodic oxidation methods is essential for the advancement of various industries and technologies.
Abstract
Anodization is an electrochemical process that electrochemically converts a metal surface into an oxide layer, resulting in enhanced corrosion resistance, wear resistance, and improved aesthetic appearance. Local anodization, also known as selective anodization, is a modified process that enables specific regions or patterns on the metal surface to undergo anodization instead of the entire surface. Several methods have been attempted to produce oxide layers via localized anodic oxidation, such as using a mask or pre-patterned substrate. However, these methods are often intricate, time-consuming, and costly. Conversely, the direct writing or patterning approach is a more straightforward and efficient way to fabricate the oxide layers. This review paper intends to enhance our comprehension of local anodization and its potential applications in various fields, including the development of nanotechnologies. The application of anodization is promising in surface engineering, where the anodic oxide layer serves as a protective coating for metals or modifies the surface properties of materials. Furthermore, anodic oxidation can create micro- and nano-scale patterns on metal surfaces. Overall, the development of efficient and cost-effective anodic oxidation methods is essential for the advancement of various industries and technologies.
참고문헌 (52)
- 문성모, "금속의 양극산화처리 기술", 한국표면공학회지, 51(1), pp.1~11 (2018), 한국표면공학회[DOI]
- F. Riboni, "Aligned metal oxide nanotube arrays : key-aspects of anodic TiO2nanotube formation and properties", Nanoscale Horiz, 1, pp.445~466 (2016)
- 이기영, "양극산화를 이용한 산화 타이타늄 나노 튜브 구조 형성 원리", 공업화학, 28(6), pp.601~606 (2017), 한국공업화학회
- T. J. Latempa, "Temperaturedependent growth of self-assembled hematite(r-Fe2O3)nanotube arrays : rapid electrochemical synthesis and photoelectrochemical properties", J. Phys. Chem. C, 113, pp.16293~16298 (2009)
- T. H. Kim, "Morphological investigation of anodized TiO2 nanotubes fabricated using different voltage conditions", Microporous Mesoporous Mater, 196, pp.41~45 (2014)
- J. Lee, "Formation of aluminum oxide nanostructures via anodization of Al3104 alloy and their wettability behavior for self-cleaning application", Catal. Today, 359, pp.50~56 (2021)
- X. Zhou, "Molybdenum dichalcogenide nanotube arrays for hydrogen-evolutionreaction catalysis : Synergistic effects of sulfur and selenium in a core-shell tube wall", Electrochem. Commun, 82, pp.112~116 (2017)
- Y. Yang, "Lithiumion intercalation and electrochromism in ordered V2O5 nanoporous layers", Electrochem. Commun, 13, pp.1198~1201 (2011)
- K. K. Upadhyay, "Capacitance response in an aqueous electrolyte of Nb2O5 nanochannel layers anodically grown in pure molten o-H3PO 4", Electrochim. Acta, 281, pp.725~737 (2018)
- Y. C. Nah, "Nitrogen doping of nanoporous WO3 layers by NH3 treatment for increased visible light photoresponse", Nanotechnology, 21, pp.105704~ (2010)
- Z. Su, "Fast fabrication of Ta2O5 nanotube arrays and their conversion to Ta3N5 for efficient solar driven water splitting", Electrochem. Commun, 50, pp.15~19 (2015)
- R. Hahn, "A novel approach for the formation of Mg(OH)2", MgO nanowhiskers on magnesium : Rapid anodization in chloride containing solutions, 2008, pp.10, 288~292
- R. Wang, "CoMoO4enhanced anodized cobalt oxide nanotube as an efficient electrocatalyst for hydrogen evolution reaction", Appl. Surf. Sci, 579, pp.152128~ (2022)
- S. Berger, "Self-ordered hexagonal nanoporous hafnium oxide and transition to aligned HfO2 nanotube layers", Electrochem. Solid-State Lett, 12, pp.K45~K48 (2009)[DOI]
- B. Pandey, "Formation of self-organized nanoporous anodic oxide from metallic gallium", Langmuir, 28, pp.13705~13711 (2012)
- K. Engelkemeier, "Zinc anodizing : structural diversity of anodic zinc oxide controlled by the type of electrolyte", ChemElectroChem, 8, pp.2155~2168 (2021)
- S. Berger, "Formation of hexagonally ordered nanoporous anodic zirconia", Electrochem. Commun, 10, pp.1916~1919 (2008)
- Y. C. Nah, "TiO2-WO3 composite nanotubes by alloy anodization : growth and enhanced electrochromic properties", J. Am. Chem. Soc, 130, pp.16154~16155 (2008)
- D. Kowalski, "TiO2 nanotubes, nanochannels and mesosponge: self-organized formation and applications", Nano Today, 8, pp.235~264 (2013)
- K. Lee, "Anodic formation of thick anatase TiO2mesosponge layers for high-efficiency Photocatalysis", J. Am. Chem. Soc, 132, pp.1478~ (2010)
- S. Berger, "Transparent TiO2 nanotube electrodes via thin layer anodization : fabrication and use in electrochromic devices", Langmuir, 25, pp.4841~4844 (2009)
- H. Lee, "Boosted photocatalytic hydrogen evolution by tuning inner pore size and co-catalyst thickness of the anodic TiO2nanotubes", Catal. Today, 359, pp.3~8 (2020)
- D. Kim, "Formation of a non-thickness-limited titanium dioxide and its use in dye-sensitized solar cells", Angew. Chem. Int. Ed, 48, pp.9326~ (2009)
- N, Khaliq, "Development of non-enzymatic cholesterol bio-sensor based on TiO2nanotubes decorated with Cu2O nanoparticles", Sens. Actuators B Chem, 302, pp.127200~ (2020)
- F. Mohammadpour, "Hightemperature annealing of TiO2 nanotube membranes for efficient dye-sensitized solar cells", Semicond. Sci. Technol, 31, pp.014010~ (2016)
- E. Gongadze, "Adhesion of osteoblasts to a nanorough titanium implant surface", Int. J. Nanomedicine, 6, pp.1801~1816 (2011)
- 최진섭, "양극산화 기술을 이용한 금속산화물 나노구조 제조 및 응용 동향", 공업화학, 19(3), pp.249~258 (2008), 한국공업화학회
- A. Lind, "Multi-purpose structured catalysts designed and manufactured by 3D printing", Mater. Des, 187, pp.108377~ (2020)
- H. Sopha, "Anodic TiO2nanotubes on 3D-printed titanium meshes for photocatalytic applications", Nano Lett, 21, pp.8701~8706 (2021)
- L. E. McNamara, "Skeletal stem cell physiology on functionally distinct titania nanotopographies", Biomaterials, 32, pp.7403~7410 (2011)
- H. Liu, "Nanoscale Materials Patterning by Local Electrochemical Lithography", Adv. Eng. Mater, 18, pp.890~902 (2016)
- J. C. Lin, "Laser trench method for mask-free direct patterning of porous silicon films", IEEE Electron Device Lett, 41, pp.1074~1077 (2020)
- C. M. Siket, "Direct writing of anodic oxides for plastic electronics", npj Flex. Electron, 2, pp.23~ (2018)
- H. Sugimura, "Scanning tunneling microscope tip-induced anodization for nanofabrication of titanium", J. Phys. Chem, 98, pp.4352~4357 (1994)
- R. Garcia, "Advanced scanning probe lithography", Nat. Nanotechnol, 9, pp.577~587 (2014)
- K. M Kang, "Fabrication of patterned TiO 2 nanotube layers utilizing 3D printer plat fo rm and their electrochromic properties", Master, pp.2022
- Z. Lai, "Smallarea techniques for micro-and nanoelectrochemical characterization : A Review", Anal. Chem, 95, pp.357~373 (2023)
- T. Sjöström, "A study on the formation of titania nanopillars during porous anodic alumina throughmask anodization of Ti substrates", Electrochim. Acta, 56, pp.203~210 (2010)
- T. Sjöström, "Novel anodization technique using a block copolymer template for nanopatterning of titanium implant surfaces", ACS Appl. Mater. Interfaces, 4, pp.6354~6361 (2012)
- D. Wang, "Microstructured arrays of TiO2 nanotubes for improved photo-electrocatalysis and mechanical stability", Adv. Func. Mater, 19, pp.1930~1938 (2009)
- H. Jha, "Aluminum microstructures on anodic alumina for aluminum wiring boards", ACS Appl. Mater. Interfaces, 2, pp.774~777 (2010)
- M. Calleja, "Size determination of field-induced water menisci in noncontact atomic force microscopy", J. Appl. Phys, 92, pp.5539~5542 (2002)
- A. Lostao, "Recent advances in sensing the inter-biomolecular interactions at the nanoscale - A comprehensive review of AFM-based force spectroscopy", Int. J. Biol. Macromol, 238, pp.124089~ (2023)
- H. Sugimura, "Gold nanoparticle arrays fabricated on a silicon substrate covered with a covalently bonded alkyl monolayer by electroless plating combined with scanning probe anodization lithography", J. Phys. Chem. C, 113, pp.11643~11646 (2009)
- A. I. Mardare, "Quantitative o p t i c a l re c o g n i t i o n o f h i g h ly reproducible ultrathin oxide films in microelectrochemical anodization", J. Appl. Phys, 80, pp.046106~ (2009)
- M. Bilal, "3D printed solution flow type microdroplet cell for simultaneous area selective anodizing", J. Adv. Res, 26, pp.43~51 (2020)
- C. M. Siket, "Surface patterned dielectrics by direct writing of anodic oxides using scanning droplet cell microscopy", Electrochim. Acta, 113, pp.755~761 (2013)
- V. Badets, "Combined local anodization of titanium and scanning photoelectrochemical mapping of TiO2spot arrays", Electrochim. Acta, 222, pp.84~91 (2016)
- D. L. Swinya, "Surface nanostructure effects on dopamine adsorption and electrochemistry on glassy carbon electrodes", J. Phys. Chem. C, 126, pp.13399~13408 (2022)
- A. J. Wain, "Scanning electrochemical microscopy for combinatorial screening applications : a mini-review", Electrochem. Commun, 46, pp.9~12 (2014)
- M. Bilal, "Fast fabrication of localized porous alumina patterns with 3D printed microdroplet cell", J. Electrochem. Soc, 167, pp.081501~ (2020)
- J. P. Kollender, "Multi-scanning droplet ce l l m i c ro s co p y(m u l t i-S D C M)for truly parallel high throughput electrochemical experimentation", Electrochim. Acta, 179, pp.32~37 (2015)