폴리올법으로 제조된 Pt/C 촉매의 연료전지 적용을 위한 나노 입자 크기제어
Nano particle size control of Pt/C catalysts manufactured by the polyol process for fuel cell application
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
This research aims to enhance the efficiency of Pt/C catalysts due to the limited availability and high cost of platinum in contemporary fuel cell catalysts. Nano-sized platinum particles were distributed onto a carbon-based support via the polyol process, utilizing the metal precursor H2PtCl6⦁6H2O. Key parameters such as pH, temperature, and RPM were carefully regulated. The findings revealed variations in the particle size, distribution, and dispersion of nano-sized Pt particles, influenced by temperature and pH. Following sodium hydroxide treatment, heat treatment procedures were systematically executed at diverse temperatures, specifically 120, 140, and 160 °C. Notably, the thermal treatment at 140 °C facilitated the production of Pt/C catalysts characterized by the smallest platinum particle size, measuring at 1.49 nm. Comparative evaluations between the commercially available Pt/C catalysts and those synthesized in this study were meticulously conducted through cyclic voltammetry, X-ray diffraction (XRD), and field-emission scanning electron microscopy-energy dispersive X-ray spectroscopy (FE-SEM EDS) methodologies. The catalyst synthesized at 160 °C demonstrated superior electrochemical performance; however, it is imperative to underscore the necessity for further optimization studies to refine its efficacy.
Abstract
This research aims to enhance the efficiency of Pt/C catalysts due to the limited availability and high cost of platinum in contemporary fuel cell catalysts. Nano-sized platinum particles were distributed onto a carbon-based support via the polyol process, utilizing the metal precursor H2PtCl6⦁6H2O. Key parameters such as pH, temperature, and RPM were carefully regulated. The findings revealed variations in the particle size, distribution, and dispersion of nano-sized Pt particles, influenced by temperature and pH. Following sodium hydroxide treatment, heat treatment procedures were systematically executed at diverse temperatures, specifically 120, 140, and 160 °C. Notably, the thermal treatment at 140 °C facilitated the production of Pt/C catalysts characterized by the smallest platinum particle size, measuring at 1.49 nm. Comparative evaluations between the commercially available Pt/C catalysts and those synthesized in this study were meticulously conducted through cyclic voltammetry, X-ray diffraction (XRD), and field-emission scanning electron microscopy-energy dispersive X-ray spectroscopy (FE-SEM EDS) methodologies. The catalyst synthesized at 160 °C demonstrated superior electrochemical performance; however, it is imperative to underscore the necessity for further optimization studies to refine its efficacy.
참고문헌 (10)
- E. V Spinacé, "Electrooxidation of methanol and ethanol using PtRu", C electrocatalysts prepared by spontaneous deposition of platinum on carbon-supported ruthenium nanoparticles, 2004, pp.129, 121~126
- F. Fiévet, "The polyol process: a unique method for easy access to metal nanoparticles with tailored sizes, shapes and compositions", Chemical Society Reviews, 47, pp.5187~5233 (2018)
- 유주연, "폴리올 공정과 액상 환원 공정에 따른 은 입자 제조및 특성 평가", 한국분말재료학회지, 23(4), pp.297~302 (2016), 한국분말재료학회
- C. Feldmann, "Preparation of Nanoscale Pigment Particles", Advanced Materials, pp.1301~1303 (2001)
- 문채린, "폴리올 공정 제어에 의한 탄소기반 나노 Pt 촉매 담지 특성 평가", 전기전자재료학회논문지, 36(2), pp.164~169 (2023), 한국전기전자재료학회
- 양종원, "수정된 폴리올법으로 합성된 Pt", C를 이용한 산소환원반응성 및 고분자전해질 연료전지 성능 연구, 2014, pp.23(3), 157~162[DOI]
- D. Rathod, "Design of an"all solid-state"supercapacitor based on phosphoric acid doped polybenzimidazole(PBI)electrolyte", Journal of Applied Electrochemistry, 39, pp.1097~1103 (2009)
- Jing Qi, "Preparation of Pt", C via a polyol process – Investigation on carbon support adding sequence, 2011, pp.36, 10490~10501
- A. Pazio, "Comparison of high surface Pt", C catalysts by cyclic voltammetry, 2002, pp.105, 13~19
- S. Prass, "Hydrogen Oxidation Artifact During Platinum Oxide Reduction in Cyclic Voltammetry Analysis of Low-Loaded PEMFC Electrodes", Electrocatalysis-an overview, 12, pp.45~55 (2021)