Sediment Transport Calculation Considering Cohesive Effects and Its Application to Wave-Induced Topographic Change
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
A sediment transport calculation considering cohesive force is proposed to deal with the transport phenomena of cohesive sediment. In the proposed calculation, each sand particle is assumed to be surrounded by a thin layer of mud. The critical Shields parameter and bed-load sediment transport rate are modified to include the cohesive force acting on the sand particle. The proposed calculation is incorporated into a two-way coupled fluidstructure-sediment interaction model, and applied to wave-induced topographic change of artificial shallows. Numerical results show that an increase in the content ratio of the mud, cohesive resistance force per unit surface area and water content cause increases in the critical Shields parameter and decreases in the bed-load sediment transport rate, reducing the topographic change of the shallow without changing its trend. This suggests that mixing mud in the pores of the sand particles can reduce the topographic change of shallows.
Abstract
A sediment transport calculation considering cohesive force is proposed to deal with the transport phenomena of cohesive sediment. In the proposed calculation, each sand particle is assumed to be surrounded by a thin layer of mud. The critical Shields parameter and bed-load sediment transport rate are modified to include the cohesive force acting on the sand particle. The proposed calculation is incorporated into a two-way coupled fluidstructure-sediment interaction model, and applied to wave-induced topographic change of artificial shallows. Numerical results show that an increase in the content ratio of the mud, cohesive resistance force per unit surface area and water content cause increases in the critical Shields parameter and decreases in the bed-load sediment transport rate, reducing the topographic change of the shallow without changing its trend. This suggests that mixing mud in the pores of the sand particles can reduce the topographic change of shallows.
참고문헌 (7)
- Ashida K., "Study on the erosion and variation of mountain streams-on the erosion and transportation of sand-mud mixtures. Disaster Prevention Research Institute Annuals B", Disaster Prevention Research Institute Annuals B, 25(B-2), pp.349~360 (1982)
- Engelund, G., "A sediment transport model for straight alluvial channels", Nordic Hydrology, 7, pp.293~306 (1976)
- Kazama, T., "Tidal flats and shallowss created through the utilization of dredged sand and its effectiveness on coastal sea environment and its problem", Proc., JSCE in the Ocean, 22, pp.607~612 (2006)
- Nakamura T., "Numerical simulation on local scouring around bottom-mounted movable short cylinder", Proc., Coastal Structures 2011, 4(87), pp.12~ (2011), ASCE
- Nakamura, T., "Experimental study on evolution of surface profile of artificial shallows and temporal change in pore-water pressure inside surface layer of shallows", J. JSCE Series B2 (Coastal Eng.), 68, pp.I_541~I_545 (2012)
- Nakamura, T., "Numerical analysis of topographic change of artificial shallows considering pore-water pressure in surface layer of shallows", J. JSCE Series B2 (Coastal Eng.), 68, pp.I_1161~I_1165 (2012)
- Son, M., "Flocculation model of cohesive sediment using variable fractal dimension", Environmental Fluid Mech, 8, pp.55~71 (2008)