PV 모듈의 셀 면적 비에 따른 공기식 PVT 컬렉터의 열 및 전기성능 비교· 분석 연구
Analysis of Thermal and Electrical Performance for Air-Type PVT Collectors According to PV Module Cell Ratios
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
The air-type photovoltaic / thermal (PVT) collector is a solar collector that acquires heat generated from the back of the PV module through the circulation of air behind the collector, while the PV module uses solar energy to produce electrical energy. In this process, electricity is produced through PV modules, and heat energy is produced through a heat collection process using air as the heat medium. According to the PV cell ratio, air-type PVT collectors differ in the collector’s thermal and electrical performance. The higher the PV cell ratio of the PV module, the more is the ratio of PV cells per unit area, thereby increasing the total electricity generation of the collector. However, when the PV cell ratio is lowered, the glass to back sheet (GtoB) transparent type PV module increases the area of the light-permeating part. Therefore, the air heat behind the PV module increases, thereby improving the thermal performance of the collector. In this study, outdoor testing was conducted in accordance with the test conditions of ISO9806:2017 to investigate the thermal and electrical performance of an air-type PVT collector. A comparative experiment was carried out for: (i) Case 1 (PV cell ratio of 0.9) with a perforated baffle, and (ii) Case 2 (PV cell ratio of 0.67) with a lower PV cell ratio to improve thermal performance. Based on the inlet flow rate and the PV cell ratio of air-type PVT collectors, the thermal and electrical efficiencies were analyzed and compared.
Abstract
The air-type photovoltaic / thermal (PVT) collector is a solar collector that acquires heat generated from the back of the PV module through the circulation of air behind the collector, while the PV module uses solar energy to produce electrical energy. In this process, electricity is produced through PV modules, and heat energy is produced through a heat collection process using air as the heat medium. According to the PV cell ratio, air-type PVT collectors differ in the collector’s thermal and electrical performance. The higher the PV cell ratio of the PV module, the more is the ratio of PV cells per unit area, thereby increasing the total electricity generation of the collector. However, when the PV cell ratio is lowered, the glass to back sheet (GtoB) transparent type PV module increases the area of the light-permeating part. Therefore, the air heat behind the PV module increases, thereby improving the thermal performance of the collector. In this study, outdoor testing was conducted in accordance with the test conditions of ISO9806:2017 to investigate the thermal and electrical performance of an air-type PVT collector. A comparative experiment was carried out for: (i) Case 1 (PV cell ratio of 0.9) with a perforated baffle, and (ii) Case 2 (PV cell ratio of 0.67) with a lower PV cell ratio to improve thermal performance. Based on the inlet flow rate and the PV cell ratio of air-type PVT collectors, the thermal and electrical efficiencies were analyzed and compared.
참고문헌 (11)
- 김진희, "공기식 PVT 컬렉터의 디자인 및 성능에 관한 연구 동향분석 연구", 한국태양에너지학회 논문집, 34(3), pp.30~41 (2014), 한국태양에너지학회
- 김상명, "실험에 의한 공기식 PVT 컬렉터의 열 ‧ 전기 성능에 관한 연구", 한국태양에너지학회 논문집, 39(2), pp.23~32 (2019), 한국태양에너지학회[DOI]
- Kim, Y. J., "The Impact of a PVT Air Flow Rate and Panel Temperature on Thermal and Power Efficiency", The Korean Society of Mechanical Engineers, pp.85~87 (2017)
- Yan, Z., "Experimental and Numerical Investigation on Thermal Performance of PV-driven Aluminium Honeycomb Solar Air Collector", Solar Energy, 204, pp.294~306 (2020)
- Ooshaksaraei, P., "Performance of Four Air-based Photovoltaic Thermal Collectors Configurations with Bifacial Solar Cells", Renewable Energy, 102, pp.279~293 (2017)
- Wu, J. S., "Optical Characterization and Photovoltaic Performance Evaluation of GaAs p-i-n Solar Cells with Various Metal Grid Spacings", Crystals, 9(3), pp.170~ (2019)
- Vats, K., "Effect of Packing Factor on the Performance of a Building Integrated Semitransparent Photovoltaic Thermal (BISPVT) System with Air Duct", Energy And Buildings, 53, pp.159~165 (2012)
- Meraj, M., "Packing Factor Effects on the Performance of Photovoltaics Module for a Given Module Area, 3rd International Innovative Applications of Computational Intelligence on Power", Energy and Controls with Their Impact on Humanity (CIPECH), pp.30~33 (2018)
- 유지숙, "공기식 PVT 컬렉터에 적용된 타공 베플의 변수에 따른 열 성능 향상을 위한 연구", 한국태양에너지학회 논문집, 39(6), pp.83~91 (2019), 한국태양에너지학회[DOI]
- "ISO 9806:2017, Solar energy - Solar thermal collectors - Test methods", International Organization for Standard, ~ (2017)
- 어승희, "PVT 시스템의 PV 모듈 및 태양열 집열기 대비 성능 및 효율 비교분석", 한국태양에너지학회 논문집, 32(2), pp.1~10 (2012), 한국태양에너지학회[DOI]