선박 엔진의 실린더 라이너용 합금주철의 부식마멸에 미치는 분위기의 영향
Effect of Atmosphere on Corrosive Wear of Alloy Cast Iron for Cylinder Liner of Large Ship Engine
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
The engine of a large ship operates under wet conditions using a fuel such as bunker C oil, which includes sulfur and many impurities. A cylinder liner made of cast iron is very susceptible to damage such as scuffing on the surface. This scuffing can reliably be attributed to the destruction of the oil film and the corrosion wear caused by water and sulfur included in the fuel, along with abrasion impurities and poor lubricants. In this study, a reciprocating friction and wear test was carried out with a cast iron specimen, which was used to simulate an engine cylinder in a corrosive environment. Base-oil and stirred oil containing distilled water, NaCl solution, and dilute sulfuric acid were used as lubricants. The friction surface was analyzed using a microscope and EDAX, and the friction coefficient was measured using a load-cell under each experimental condition. We then attempted to investigate the damage to the cylinder liner using the results.
Abstract
The engine of a large ship operates under wet conditions using a fuel such as bunker C oil, which includes sulfur and many impurities. A cylinder liner made of cast iron is very susceptible to damage such as scuffing on the surface. This scuffing can reliably be attributed to the destruction of the oil film and the corrosion wear caused by water and sulfur included in the fuel, along with abrasion impurities and poor lubricants. In this study, a reciprocating friction and wear test was carried out with a cast iron specimen, which was used to simulate an engine cylinder in a corrosive environment. Base-oil and stirred oil containing distilled water, NaCl solution, and dilute sulfuric acid were used as lubricants. The friction surface was analyzed using a microscope and EDAX, and the friction coefficient was measured using a load-cell under each experimental condition. We then attempted to investigate the damage to the cylinder liner using the results.
참고문헌 (9)
- 이돈출, "Marine Diesel Engines and Gas Turbines" (2011), 동명사
- S. H. AVNER, "Introduction to Physical Metallurgy, Second Edition" (1974), MaGraw-Hill Book Comp
- Francesco M., "Suction air humidity influence on piston running reliability in low-speed two-stroke diesel engines", CIMAC, 74, pp.1~15 (2010)
- Hiroyuki Nagamatsu, "Study of Scuffing and Piston Deposits - Hardness of Inorgaric Compound’s Deposits", CIMAC (2004)
- T. Yamada, "Monitoring of Cylinder Liner and Piston Ring on Low-Speed Diesel Engines", CIMAC (2004)
- Cees Schenk, "The Role of Temperature and Pressure in Wear Processes in Low-Speed Diesel Engine", Proc. ISME, 2 (2000)
- Saburi S., "Tribology between piston rings and cylinder liners of marine diesel engines", IHI Eng.Review, 38(1), pp.11~18 (2005)
- A.K. Van Helden, "Corrosive Wear in Crosshead Diesel Engines", Tribology International, 22 (1989), Butterworth & Co. Publishers
- Mars G. F., "Corrosion Engineering" (1986), McGraw-Hill Book Comp