감량가공 조건이 용출형 편심중공사 직물의 물성에 미치는 영향
Effect to the Physical Properties of the Eluted Partial Dispositioned Hollow Filament Fabrics according to the Weight Reduction Conditions
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The objective of this study is to investigate the elution characteristics of the partial dispositioned hollow nylon filament and the mechanical properties of the eluted fabrics according to the weight reduction conditions. For this purpose, the partial dispositioned nylon/PET composite filament, SDY 70d/48f was prepared, and warp beam was also prepared on the sizing machine using these yarns. Four kinds of woven fabrics were designed with different warp and weft densities and these fabrics specimens were eluted with weight reduction conditions of two kinds of NaOH concentration (30, 40g/l), three kinds of weight reduction temperature (50, 60, 85℃) and two kinds of weight reduction time (30, 60min). The eluting rates of these fabrics specimens were analysed with various weight reduction conditions. The eluting characteristics of these fabrics were discussed with the cross-section of nylon hollow filament measures by SEM. Finally, the mechanical properties of the partial dispositioned hollow nylon fabrics were measured and discussed with various weight reduction conditions.
Abstract
The objective of this study is to investigate the elution characteristics of the partial dispositioned hollow nylon filament and the mechanical properties of the eluted fabrics according to the weight reduction conditions. For this purpose, the partial dispositioned nylon/PET composite filament, SDY 70d/48f was prepared, and warp beam was also prepared on the sizing machine using these yarns. Four kinds of woven fabrics were designed with different warp and weft densities and these fabrics specimens were eluted with weight reduction conditions of two kinds of NaOH concentration (30, 40g/l), three kinds of weight reduction temperature (50, 60, 85℃) and two kinds of weight reduction time (30, 60min). The eluting rates of these fabrics specimens were analysed with various weight reduction conditions. The eluting characteristics of these fabrics were discussed with the cross-section of nylon hollow filament measures by SEM. Finally, the mechanical properties of the partial dispositioned hollow nylon fabrics were measured and discussed with various weight reduction conditions.
참고문헌 (15)
- S. J. Kim, "A Study on the Physical Property of Sheath", Core Type Nylon, J. Korea Soc. Dyers & Finishers[DOI]
- 송민규, "중공복합사 제조조건에 따른 중공률 변화 연구", 한국섬유공학회지, 40(1), pp.26~32 (2003), 한국섬유공학회
- 김경애, "감량가공된 폴리에스테르직물의 태에 관한 연구(IV)- 시각평가를 중심으로 -", 대한가정학회지, 40(9), pp.97~107 (2002), 대한가정학회
- D. G. Bae, "The Study on the Weight Loss Finishing for the Mixture Silk", Polyester 2. The Weight Loss Finishing for the Spun Silk, Korean J. Seric. Sci., pp.1994, 36(1)[DOI]
- S. Y. Lee, "A Study on Alkali Treatment of Polyester", Silk Union Cloth, 1998, pp.10(5), 39~47
- 박재민, "0.01d 폴리에스테르 초극세 섬유의 알칼리 감량과 물성", 한국염색가공학회지, 18(4), pp.37~42 (2006), 한국염색가공학회
- 노덕길, "전해환원수에 의한 폴리에스테르 직물의 감량가공 특성", 한국염색가공학회지, 17(5), pp.37~44 (2005), 한국염색가공학회
- 김일한, "“고기능성 나일론 중공사 직물 및 그 제조방법”, 대한민국특허청, 10-0278317", ~ (2000)
- 조정래, "“경량보온성 폴리아미드계 직물의 제조방법”, 대한민국특허청, 10-0260385", ~ (2000)
- 김윤, "“경량감이 우수한 신축성 직편물의 제조방법”, 대한민국특허청, 특1994-017571", ~ (1999)
- 김상웅, "“경량감과 보온성이 우수한 폴리에스테르 직물의 제조방법”, 대한민국특허청, 특0173529", ~ (1998)
- 조정래, "“염색성이 우수한 폴리에스테르 중공사의 제조방법”, 대한민국특허청, 특1994-0014946", ~ (1994)
- M. Matsudaira, "The Effect of a Grooved Hollow in a Fiber on Fabric Moisture and Heat Transport Properties", J. Text. Inst., 87, pp.409~415 (1996)
- H. J. Shim, "Comparison of Hand and Thermal Properties of Woven Fabrics Made from Hollow and Regular Fibers", Journal of the Korean Fiber Society, 37(5), pp.280~285 (2000)
- The Physical Properties of Polyester Yarns DATA Collections, "S. J. Kim", Yeungman Univ, 1~409 (1997)