LED 모듈 표준 표시사항의 경제적인 평가를 위한 단일 핀 방열 블록의 냉각성능 예측
Predicted Cooling Performance of Single Finned Heat Dissipating Block for Economic Assessment of LED Module Markings in Standards
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
LED has received intensive research attention due to its long life, high efficacy, fast response and wide colour availability, and has secured extensive application areas. However, LED chips within the modules convert only fraction of electric energy into light, and majority of supplied energy needs to be dissipated as heat, which challenges in the performance and life of the LED modules. IEC 62717 specifies the performance requirements for LED modules together with the test methods and conditions. The present study examined the influence of different design parameters on performance temperature through series of experiments and numerical simulations. The economic means to change the module performance temperature during the measurement of mandatory markings were suggested based on predicted cooling performances.
Abstract
LED has received intensive research attention due to its long life, high efficacy, fast response and wide colour availability, and has secured extensive application areas. However, LED chips within the modules convert only fraction of electric energy into light, and majority of supplied energy needs to be dissipated as heat, which challenges in the performance and life of the LED modules. IEC 62717 specifies the performance requirements for LED modules together with the test methods and conditions. The present study examined the influence of different design parameters on performance temperature through series of experiments and numerical simulations. The economic means to change the module performance temperature during the measurement of mandatory markings were suggested based on predicted cooling performances.
참고문헌 (11)
- Park. J. W, "Rapid thermal diffusion devices development of the high power LED lighting system", Proceedings of Korea society of precision engineering autumn conference, pp.593~594 (2010)
- N. Narendran, "Life of LED-based white light sources", IEEE, 2005, pp.9, 167~171
- Shin. M. H, "The present status of high power LED packaging technology", Physics & high technology, pp.16~21 (2008)
- "Understanding the cause of fading in high-brightness LEDs" (2012)[URL]
- Y. Tang, "A high power LED device with chips directly mounted on heat pipes", Applied Thermal Engineering, 66, pp.632~639 (2014)
- Kim. L, "Thermal analysis of LED array system with heat pipe", Thermochimica Acta, 455, pp.21~25 (2007)
- 황순호, "10W LED 조명등 방열 설계 최적화에 관한 연구", 한국산학기술학회논문지, 11(7), pp.2317~2322 (2010), 한국산학기술학회
- Kim. C. M, "Study on the heat dissipation performance of LED by thermal conductivity enhanement of carbon nanogrease", Proceeding of the SAREK summer conference, pp.105~108 (2013)
- H. Ye, "Two-phase cooling of light emitting diode for higher light output and increased efficiency", Applied Thermal Engineering, 52, pp.353~359 (2013)
- B. Siegal, "Practical considerations in high power LED junction temperature measurements", Proceedings of International Electronic Manufacturing Technology, pp.62~66 (2006)
- 육지현, "LED 램프 패키지 설계를 위한 기본 지침", 한국광학회지, 22(3), pp.141~150 (2011), 한국광학회