자동차용 브레이크 마찰재에서 고망간강의 마찰 및 마모특성
Friction and Wear Properties of High Manganese Steel in Brake Friction Material for Passenger Cars
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
In this study, we investigate the mechanical properties of high manganese steel, and the friction and wear characteristics of brake friction material containing this steel, for passenger car application, with the aim of replacing copper and copper alloys whose usage is expected to be restricted in the future. These steels are prepared using a vacuum induction melting furnace to produce binary and ternary alloys. The hardness and tensile strength of the high manganese steel decrease and the elongation increases with increase in manganese content. This material exhibits high values of hardness, tensile strength, and elongation; these properties are similar to those of 7-3 brass used in conventional friction materials. We fabricate high manganese steel fibers to prepare test pad specimens, and evaluate the friction and wear characteristics by simulating various braking conditions using a 1/5 scale dynamometer. The brake pad material is found to have excellent friction stability in comparison with conventional friction materials that use 7-3 brass fibers; particularly, the friction stability at high temperature is significantly improved. Additionally, we evaluate the wear using a wear test method that simulates the braking conditions in Europe. It is found that the amount of wear of the brake pad is the same as that in the case of the conventional friction material, and that the amount of wear of the cast iron disc is reduced by approximately 10. The high manganese steel is expected to be useful in the development of eco-friendly, copper-free friction material.
Abstract
In this study, we investigate the mechanical properties of high manganese steel, and the friction and wear characteristics of brake friction material containing this steel, for passenger car application, with the aim of replacing copper and copper alloys whose usage is expected to be restricted in the future. These steels are prepared using a vacuum induction melting furnace to produce binary and ternary alloys. The hardness and tensile strength of the high manganese steel decrease and the elongation increases with increase in manganese content. This material exhibits high values of hardness, tensile strength, and elongation; these properties are similar to those of 7-3 brass used in conventional friction materials. We fabricate high manganese steel fibers to prepare test pad specimens, and evaluate the friction and wear characteristics by simulating various braking conditions using a 1/5 scale dynamometer. The brake pad material is found to have excellent friction stability in comparison with conventional friction materials that use 7-3 brass fibers; particularly, the friction stability at high temperature is significantly improved. Additionally, we evaluate the wear using a wear test method that simulates the braking conditions in Europe. It is found that the amount of wear of the brake pad is the same as that in the case of the conventional friction material, and that the amount of wear of the cast iron disc is reduced by approximately 10. The high manganese steel is expected to be useful in the development of eco-friendly, copper-free friction material.
참고문헌 (23)
- Eriksson, M., "Tribological surfaces of organic brake pads", Tribol. Int, 33(12), pp.817~827 (2000)
- Österle, W., "Chemical and microstructural changes induced by friction and wear of brakes", Wear, 251(1-12), pp.1469~1476 (2001)
- Gopal, P., "Fade and wear characteristics of a glass-fiber-reinforced phenolic friction material", Wear, 174(1-2), pp.119~127 (1994)
- Kumar, M., "NAO friction materials with various metal powders : Tribological evaluation on full-scale inertia dynamometer", Wear, 269(11-12), pp.826~837 (2010)
- Yuji, H., "Effects of Cu powder, BaSO4 and cashew dust on the wear and friction characteristics of automotive brake pads", Tribol. Trans, 39(2), pp.346~353 (1996)
- Österle, W., "On the role of copper in brake friction materials", Tribol. Int, 43(12), pp.2317~2326 (2010)
- Kukutschová, J., "Wear mechanism in automotive brake materials, wear debris and its potential environmental impact", Wear, 267(5-8), pp.807~817 (2009)
- Kukutschová, J., "On airborne nano", micro-sized wear particles released from low-metallic automotive brakes, 2011, pp.159(4), 998~1006
- Kumar, M., "Non-asbestos organic(NAO)friction composites : role of copper; its shape and amount", Wear, 270(4), pp.269~280 (2011)
- Lee, P. W., "Friction and wear of Cu-free and Sb-free environmental friendly automotive brakematerials", Wear, 302(1-2), pp.1404~1413 (2013)
- Gilardi, R., "Copper substitution and noise reduction in brake pads : graphite type selection", Materials, 5(11), pp.2258~2269 (2012)
- Wallinder, I. O., "A Laboratory Study of Copper and Zinc Runoff During First Flush and Steady State Conditions", Corrosion Sci, 43(1), pp.127~146 (2001)
- Kramer, S. D., "ASTM Environmental Factor Affecting Atmosphere Corrosion of Copper", ASTM Symposium, Outdoor and Indoor Corrosion (2001)
- Wallinder, I. O., "Effects of Exposure Direction and Inclination on the Runoff Rates of Zinc and Copper Roofs", Corrosion Sci, 42(8), pp.1471~1487 (2000)
- Jowen, S., "Simultaneous Copper Runoff and Copper Surface Analysis in an Outdoor Area", Surf. Interface Anal, 30, pp.145~148 (2000)
- Kim, S., "The role of copper on the friction and wear performance of automotive brake friction materials", SAE Int. J. Mater. Manf, 5, pp.9~18 (2012)
- William Arnulfo Aperador, "Evaluation of erosion-corrosion resistance in Fe-Mn-Al austenitic steels", Materials Research, 16(2), pp.447~452 (2013), FapUNIFESP (SciELO)[DOI]
- Grajcar, A., "Microstructure and corrosion behavior of hot-deformed and cold-strained high-Mn steels", J. Mater. Eng. Perform, 25(6), pp.2245~2254 (2016)
- Gale, W.F., "Smithells Metal Reference Book", pp.285~ (2003), British Library Cataloguing in Publication
- H. Shoji, , Z.Kristallogr, 77, pp.381~ (1931)
- Charles, J., "Austenite Steels at Low Temperature", pp.311~ (1983), Plenum Press
- Jang, H., "The Effect of Antimony Trisulfide(Sb2S3)and Zirconium Silicate(ZrSiO4)in the Automotive Brake Friction Material on Friction Characteristics", Wear, 239(2), pp.229~236 (2000)
- 이현철, "표면막과 표면거칠기가 접촉 저항에 미치는 영향", 한국트라이볼로지학회지, 35(1), pp.16~23 (2019), 한국트라이볼로지학회[DOI]