유동 비등 시스템에서 산화 그래핀 나노유체의 열전달 및 파울링에 대한 연구
Study on Heat Transfer and Fouling of Flow Boiling Systems using Oxidized Graphene Nanofluid
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
The nanofluids are the fluids with excellent thermal property, it is expected as a working fluid of the next generation. The nanofluids are well known that if it is used in the boiling heat transfer system, the critical heat flux is enhanced up to 200%, and the thermal conductivity is increased up to from 10 to 160%. However, the fouling phenomenon can be occurred that nanoparticles of nanofluids are deposited on the heat transfer surface. Therefore, to investigate relation between nanofluid and fouling, this study is carried out using oxidized graphene nanofluid. Also it compared and analyzed the critical heat flux and the boiling heat transfer coefficient. As the result, in case of oxidized graphene deposition for fouling, the critical heat flux is increased up to 20% more than oxdized graphene nanofluid. However, the boiling heat transfer coefficient is decreased down to about 6 kW/m2K at 1,000kW/m2 more than pure water.
Abstract
The nanofluids are the fluids with excellent thermal property, it is expected as a working fluid of the next generation. The nanofluids are well known that if it is used in the boiling heat transfer system, the critical heat flux is enhanced up to 200%, and the thermal conductivity is increased up to from 10 to 160%. However, the fouling phenomenon can be occurred that nanoparticles of nanofluids are deposited on the heat transfer surface. Therefore, to investigate relation between nanofluid and fouling, this study is carried out using oxidized graphene nanofluid. Also it compared and analyzed the critical heat flux and the boiling heat transfer coefficient. As the result, in case of oxidized graphene deposition for fouling, the critical heat flux is increased up to 20% more than oxdized graphene nanofluid. However, the boiling heat transfer coefficient is decreased down to about 6 kW/m2K at 1,000kW/m2 more than pure water.
참고문헌 (16)
- S. K. Das, "Nanofluids：science and technology" (2008), John Wiley and Sons
- Y. Li, "A review on development of nanofluid preparation and characterization", Powder Technology, 196(2), pp.89~101 (2009)
- J. Barber, "A review on boiling heat transfer enhancement with nanofluids", Nanoscale Research Letters, 6, pp.1~16 (2011)
- J. M. Wu, "A review of nanofluid heat transfer and critical heat flux enhancement-research gap to engineering application", Progress in Nuclear Energy, 66, pp.13~24 (2013)
- Ahn. H. S, "Experimental study of critical heat flux enhancement during forced convective flow boiling of nanofluid on a short heated surface", International Journal of Multiphase Flow, 36(5), pp.375~384 (2010)
- H. Peng, "Heat transfer characteristics of refrigerant-based nanofluid flow boiling inside a horizontal smooth tube", International Journal of Refrigeration, 32(6), pp.1259~1270 (2009)
- J. Lee, "Assessment of the effectiveness of nanofluids for single-phase and two-phase heat transfer in micro-channels", International Journal of Heat and Mass Transfer, 50(3-4), pp.452~463 (2007)
- S. J. Kline, "Describing uncertainties in single-sample experiment", Mechanical Engineer, 75, pp.3~8 (1953)
- N. Zuber, "On stability of boiling heat transfer", ASME transactions, 80, pp.711~714 (1958)
- Y. Katto, "Critical heat flux of saturated convective boiling on uniformly heated plates in a parallel flow", International Journal of Multiphase Flow, 6(6), pp.575~582 (1980)
- Lee. S. W, "Study on flow boiling critical heat flux enhancement of graphene oxide", water nanofluid, 2013, pp.65, 348~356
- K. Henderson, "Flow-boiling heat transfer of R-134a-based nanofluids in a horizontal tube", International Journal of Heat and Mass Transfer, 53(5-6), pp.944~951 (2009)
- M. M. Sarafraz, "Role of nanofluid fouling on thermal performance of a thermosyphon:Are nanofluids reliable working fluid?", Applied Thermal Engineering, 82, pp.214~224 (2015)
- 박성식, "Effects of spray-deposited oxidized multi-wall carbon nanotubes and graphene on pool-boiling critical heat flux enhancement", Journal of Industrial and Engineering Chemistry, 24, pp.276~283 (2015), 한국공업화학회[DOI]
- 이승원, "CRITICAL HEAT FLUX ENHANCEMENT IN FLOW BOILING OF Al2O3 AND SiC NANOFLUIDS UNDER LOW PRESSURE AND LOW FLOW CONDITIONS", Nuclear Engineering and Technology, 44(4), pp.429~436 (2012), 한국원자력학회[DOI]
- Fouling of heat transfer surfaces, Heat transfer – Theoretical analysis, experimental investigations and industrial systems, "Mostafa M. Awad", 505~542 (2011)