윤활유 분석 센서를 통한 기계상태진단의 문헌적 고찰(적용사례)

키워드

참고문헌 (57)

1. 홍성호, "윤활유 분석 센서를 통한 기계상태진단의 문헌적 고찰 (윤활유 센서의 종류와 기능)", 한국트라이볼로지학회지, 36(6), pp.297~306 (2020), 한국트라이볼로지학회[DOI]
2. Yan, X. P., "A study of information technology used in oil monitoring", Tribol. Int, 38, pp.879~886 (2005)
3. Hong, S. H., "Literature review of machine condition monitoring with oil sensors-Application cases", Proc. Conf. Korean Tribol. Soc (2020)
4. Hong, S. H., "Machine condition monitoring system with ferrous wear debris sensor", Proc. Autumn Conf. Korean Tribol. Soc (2019)
5. Zhu, X., "Lubricating oil condition sensors for online machine health monitoring –A review", Tribol. Int, 109, pp.473~484 (2017)
6. "Gill Sensors & Controls. Oil debris sensor"[URL]
7. Murali, S., "Capacitive Coulter counting : detection of metal wear particles in lubricant using a microfluidic device", Smart Mater. Struct, 18, pp.37001~ (2009)
8. Du, L., "Real-time monitoring of wear debris in lubrication oil using a microfluidic inductive Coulter counting device", Microfluid Nanofluidics, 9, pp.1241~1245 (2010)
9. Du, L., "A high throughput inductive pulse sensor for online oil debris monitoring", Tribol. Int, 44, pp.175~179 (2011)
10. Nemarich, C. P., "Online wear particle monitoring based on ultrasonic detection and discrimination", Mater. Eval, 50, pp.525~530 (1988)
11. Hamilton, A., "Development of a novel wear detection system for wind turbine gearboxes", IEEE Sens. J, 14, pp.465~473 (2014)
12. Markova, L. V., "On-line monitoring of the viscosity of lubricating oils", J. Frict. Wear, 31, pp.433~442 (2010)
13. Markova, L. V., "On-line acoustic viscometry in oil condition monitoring", Tribol. Int, 44, pp.963~970 (2011)
14. Salzer, S., "Tuning fork for noise suppression in magnetoelectric sensors", Sens. Actuators A Phys, 237, pp.91~95 (2016)
15. Mortier, R. M., "Chemistry and technology of lubricants" (2010), Springer
16. Holzki, M., "Evanescent-fieldfiber sensor for the water content in lubricating oils with sensitivity increase by dielectrophoresis", Sens. Actuators A Phys, 184, pp.93~97 (2012)
17. Effects of oxygenates on soot processes in DI diesel engines : experiments and numerical simulations, "Mueller, C. J.", SAE, 1791~, pp.SAE Technical Papers, Vol.1 (2003)
18. George, S., "Effect of diesel soot contaminated oil on engine wear", Wear, 262, pp.1113~1122 (2007)
19. Smiechowski, M. F., "Iridium oxide sensors for acidity and basicity detection in industrial lubricants", Sens. Actuators B Chem, 96, pp.261~267 (2003)
20. Soleimani, M., "Base oil oxidation detection using novel chemical sensors and impedance spectroscopy measurements", Sens. Actuators B chem, 199, pp.247~258 (2014)
21. Kimura, Y., "Bubble behavior in engine lubricant", Int. J. Automot. Eng, 2, pp.149~153 (2011)
22. "Lubricant aeration"[URL]
23. Tandon, N., "Condition monitoring of electric motor ball bearings for the detection of grease contaminants", Tribol. Int, 40, pp.29~36 (2007)
24. "Online condition monitoring of grease in rolling bearings"[URL]
25. Wu, T., "Progress and trend of sensor technology for on-line oil monitoring", Sci. China Technol. Sci, 56, pp.2914~2926 (2013)
26. Preethichandra, D. M. G., "Actual condition monitoring of engine oil through an intelligent multi-functional sensing approach", Proceedings of the 26th annual conference of the IEEE industrial electronics society, pp.2383~2387 (2000), IECON
27. Duchowski, J. K., "A novel approach to predictive maintenance : a portable, multi-component MEMS sensor for on-line monitoring of fluid condition in hydraulic and lubricating systems", Tribol. Trans, 49, pp.545~553 (2006)
28. Hong, W., "Mechanical wear debris feature, detection, amd diagnosis : A review", Chinese Journal of Aeronautics, 31(5), pp.867~882 (2018)
29. Flanagan, I. M., "Wear-debris detection and analysis techniques for lubricant-based condition monitoring", J. Phys. E. Sci. Instrum, 21, pp.1011~1016 (1988)
30. Coronado, D., "Assessment and validation of oil sensor systems for on-line oil condition monitoring of wind turbine gearboxes", Procedia Technology, 15, pp.747~754 (2014)
31. Tavner, P., "Offshore wind turbines : reliability, availability and maintenance" (2012), Institution of Engineering and Technology
32. Dupuis, R., "Application of oil debris monitoring for wind turbine gearbox prognosis and health management", Annual Conference of the Prognostics and Health Management Society (2010)
33. Report on wind turbine subsystem reliability - A survey of various data bases, "Sheng, S.", National Renewable Energy Laboratory, ~ (2013)
34. Zhong, X., "Research of condition monitoring and fault diagnosis techniques for wind turbine gearbox", Journal of Tribology Transaction of ASME, 197, pp.206~210 (2012)
35. Cibulka, J., "A review on approaches for condition based maintenance in application with induction machines located offshore", Modelling Identification and Control, 33(2), pp.69~86 (2012)
36. Yanhui Feng, "Monitoring wind turbine gearboxes", Wind Energy, 16(5), pp.728~740 (2013), Wiley[DOI]
37. Toms, A., "Oil debris monitoring: Part of an effective gearbox monitoring strategy", Proceedings of the 69th Annual Meeting and Exhibition (2014)
38. Yang, D., "Oil contamination monitoring based on dielectric constant measurement", Proceedings of the International Conference on Measuring Technology and Mechatronics Automation (2009)
39. Diego Coronado, "Monitoring the Oil of Wind-Turbine Gearboxes: Main Degradation Indicators and Detection Methods", Machines, 6(2), pp.25~ (2018), MDPI AG[DOI]
40. Guan, L., "Application of dielectric spectroscopy for engine lubricating oil degradation monitoring", Sensors and Actuators A : Physical, 168, pp.22~29 (2011)
41. Lvovich, V. F., "Impedance characterization of industrial lubricants", Electrochim. Acta, 51, pp.1487~1496 (2006)
42. Wu, T., "Full-life dynamic identification of wear state based on on-line wear debris image features", Mech. Syst. Signal Process, 42(1), pp.404~414 (2014)
43. Wang, S. S., "The application of a. c. impedance technique for detecting glycol contamination in engine oil", Sens. Actuators B, 40, pp.193~197 (1997)
44. Wang, S. S., "A new technique for detecting antifreeze in engine oil during early stage of leakage", Sens. Actuators B, 96, pp.157~164 (2003)
45. Christian, U., "Simultaneous estimation of soot and diesel contamination in engine oil using electrochemical impedance spectroscopy", Sens. Actuators B, 127, pp.613~618 (2007)
46. Wang, S. S., "Engine oil condition sensor : method for establishing correlation with total acid number", Sens. Actuators B, 86, pp.122~126 (2002)
47. Gao, W., "Prediction of wear trend of engines via on-line wear debris monitoring", Tribol. Int, 120, pp.510~519 (2018)
48. 전상명, "딥스틱게이지형 소형 엔진열화감지센서 개발", 한국트라이볼로지학회지, 29(2), pp.77~84 (2013), 한국트라이볼로지학회[DOI]
49. 전상명, "엔진오일 유전상수 변화량 측정에 의한 엔진오일 품질 모니터링 시스템 개발", 한국트라이볼로지학회지, 27(3), pp.125~133 (2011), 한국트라이볼로지학회
50. Liu, Y., "Research on an online wear condition monitoring system for marine diesel engine", Tribol. Int, 33, pp.829~835 (2020)
51. Electronic oil debris monitoring system, "Eaton Aerospace Group", Eaton Aerospace Group Electrical Sensing and Controls, ~ (2009)
52. Zeng, J., "Study condition monitoring of construction equipment based on wireless sensor networks", 2010 International Conference on Computer Application and System Modeling (2010)
53. Ying Jiang, "Overview of Applications of the Sensor Technologies for Construction Machinery", IEEE Access, 8, pp.110324~110335 (2020), Institute of Electrical and Electronics Engineers (IEEE)[DOI]
54. Felix, N., "Improving hydraulic excavator performance through in line hydraulic oil contamination monitoring", Mechanical Systems and Signal Processing, 83, pp.176~193 (2017)
55. Hong, S. H., "Development of test device for machine condition monitoring system with lubricant oil sensors", Proc. Conf. Korean Tribol. Soc (2020)
56. Liu, C., "Measurement of moisture content in lubricating oils of high-speed rail gearbox by Vis-NIR spectroscopy", Optik – International Journal for Light and Electron Optics, 224, pp.165694~ (2020)
57. Pang, Z., "Development of in-line oil contamination sensor for lubricant of scraper conveyor reducer", The Ninth International Conference on Electronic Measurement & Instruments (2009)

관련 논문AI추천